• 한국식품과학회지
• /
• 제27권4호
• /
• pp.582-592
• /
• 1995

옥수수전분과 찰옥수수전분을 사용하여 중간 수분계의 수분함량으로 반죽을 제조하고 수분함량과 가열온도, 가열시간에 따른 전분 반죽의 물성 변화와 호화양상을 밝혀보고자 하였다. 이를 위하여 먼저 전분반죽과 같은 반고체(semi-solid) 물질의 물성을 측정할 수 있는 Extrusion Capillary Viscometer(ECV)를 자체 제작하였다. ECV를 사용하여 수분함량 $36{\sim}52%$ 범위로 제조된 옥수수전분과 찰옥수수전분 반죽의 물성측정 시 반죽의 열전달 특성은 가열온도 $60{\sim}100^{\circ}C$ 범위에서 수분함량이 36%에서 52%로 증가할수록 반죽의 중심온도가 원하는 가열온도에 도달하는데 걸리는 시간이 220초에서 140초로 크게 단축되었다. 가열 후 ECV로 물성을 측정한 결과, 수분함량과 가열온도의 모든 범위에서 반죽은 의가소성 유체의 흐름 특성을 나타내었다. 동일한 전단속도에서는 반죽 수분함량이 증가할수록 전단응력과 전단점도가 전체적으로 감소하여 수분함량 증가에 따른 반죽의 유동성(flowability) 증가 영향이 매우 큰 것으로 나타났다. 그러나 44% 이상의 동일 수분함량 내에서는 $80^{\circ}C$ 이상의 가열온도부터는 동일한 전단속도에서 $80^{\circ}C$ 이하로 가열한 반죽에 비해 전단응력과 전단점도가 증가하는 경향을 보여 주었다. 반죽의 점도에 미치는 수분함량의 영향은 수분함량이 증가할수록 반죽의 유동성의 크기가 증가하여 전체적으로 전단응력이나 점도가 감소하는 것으로 나타나지만, 가열온도가 호화온도 이상인 $80^{\circ}C$부터는 전분호화에 의한 점도 증가에 의하여 수분함량에 따른 농도 의존성지수(B)값이 크게 감소하고 $60^{\circ}C$나 $70^{\circ}C$ 가열온도보다도 수분함량의 영향이 적게 미치는 것으로 나타났다.

• 한국가정과학회지
• /
• 제3권1호
• /
• pp.88-99
• /
• 2000

옥수수, 감자, 고구마 전분현탁액에 가열 전 $.$후 산을 첨가하여 pH를 4.0∼5.0으로 하였을 때 마밀로그라프에 의한 호화특성과 Brookfield 점도계로 측정한 전도 특성은 다음과 같다. 산 첨가에 따른 옥수수전분, 감자전분. 고구마전분의 아밀로그라프에 의한 특성은 가열전에 산을 첨가하였을때 호화개시온도가 대조군보다 상승되었고, 감자전분의 호화개시온도 상승이 가장 컸다. 각 전분의 점도는 pH가 낮아질수록 감소하였는데 옥수수전분의 경우 가열전 $.$후와는 관계없이 점도변화가 가장 적었다. 가열전 산을 첨가하였을 때 consistency(C-H), setback(C-P)은 증가하였고. breakdown(P-H)은 감소하였다. 가열 후 산을 첨가한 경우는 consistency(C-H), setback(C-P)은 감소하였고, breakdown(P-H)은 증가하여 가열전과 가열후 산첨가의 결과는 다르게 나타났다. 산에 의한 점도의 변화정도는 감자전분, 고구마전분, 옥수수전분 순으로 크게 변화하였다. 가열전 산을 첨가하여 일정온도까지 가열하여 Brookfield 점도계로 점도를 측정한 경우 pH가 낮을수록 점도는 전체적으로 낮게 나타났으나, 가열에 따른 냉각점도는 가열온도가 높을수록 pH의 영향에 따른 냉각점도의 감소가 뚜렷하게 나타났다. 가열 후 산을 첨가하여 냉각점도를 측정한 경우 가열전 산첨가에 비하여 옥수수전분 과 고구마전분은 전반적으로 점도가 높은 경향이었다.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.1032-1043
• /
• 1989

본 연구에서는 해석적으로 열적 입구 길이를 규명하는데 필요한 와류 열확산 계수를 실험 결과를 이용하여 결정하고, 시험관 입구의 형상 변화가 열전달 특성에 미치는 영향을 실험적으로 결정하며, 열적 입구 길이 영역에서 국소 열전달 계수를 표시할 수 있는 실험식을 제시하고, 유체의 전단율에 따른 점성 계수의 실험 결과와 점탄성 유체의 특성시간을 이용한 새로운 무차원 수인 Weissenberg수를 결정하여 퇴화 현상을 분석하고저 한다.

• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.99-106
• /
• 2008

To improve concrete tensile strength and bending strength, New plan that have more economical and simple manufacture process is groped. By an alternative plan, chemical pre-stressed concrete is presented. In this study, we analyzed the rheological properties of cement paste with the kind and replacement ratio of k-type CSA type expansive additives that is used mainly in domestic. and we suggested that the algorithm of a mixing plan in the chemical pre-stressed concrete and from this, we presented the basic report for the right mixing plan. From the results, Flow increased more or less according to use of expansive additives. This phenomenon was observed by increasing paste amount that shows as substitution for expansive additives that specific gravity is smaller than that of cement. As linear regression a result supposing paste that mix expansive additives by Bingham plastic fluid. The shear rate and shear stress expressed high interrelationship. therefore, flow analysis of quantitative was available. The plastic viscosity following to replacement ratio of expansive additives is no change almost, the yield value is decreased in proportion to the added amount of expansive additives. Through this experiment, we could evaluate rheological properties of cement paste using the expansive additives. Hereafter by an additional experiment, we must confirm stability assessment of material separation by using the aggregate with the kind and replacement ratio of expansive additives.

• 대한화학회지
• /
• 제54권1호
• /
• pp.71-76
• /
• 2010

298.15~318.15 K 온도에서 디지탈 진동 U-tube densimeter 와 Ubbelohde 모세관 점성계을 사용하여 2-브로모프로판/메탄올 이성분 혼합물의 밀도와 점성도를 측정하였다. 온도와 농도에 대한 밀도와 점성도 상호 의존 관계를 조사하였다. 이성분 혼합물의 여분 몰부피와 여분 점성도를 실험으로 얻어진 밀도와 점성돌로부터 계산하여 구하였다. 모델이 실험치와 잘부합됨을 발견하였다.

• 한국태양에너지학회 논문집
• /
• 제32권6호
• /
• pp.85-92
• /
• 2012

A nanofluid is a fluid containing suspended solid particles, with sizes on the order of nanometers. Normally, nanofluids have higher thermal conductivitiest han their base fluids. Therefore, we measured the thermal conductivity and viscosity of oxidized carbon nanofluids based the mixture of distilled water and ethanol (ethanol concentration is 0.2) oxidized carbon nanofluids were made by ultrasonic dispersing oxidized multi-walled carbon nanotubes in the mixture of distilled water and ethanol at the rates of 0.001~ 0.1 vol%. The thermal conductivity and viscosity of oxidized carbon nanofluids were measured by using transient hot-wire method and rotational digital viscometer, respectively. And all of experiments were carried out at the same temperature conditions($10^{\circ}C$, $25^{\circ}C$ and $70^{\circ}C$). As a result, when volume fraction of nanofluids is 0.1 vol%, thermal conductivity was improved 13.6% ($10^{\circ}C$), 15.1% ($25^{\circ}C$), and 17.0% ($70^{\circ}C$), and its viscosity was increased by 36.0% ($10^{\circ}C$), 32.9% ($25^{\circ}C$) and 19.5% ($70^{\circ}C$) than the base fluids.

• 한국태양에너지학회 논문집
• /
• 제32권6호
• /
• pp.93-99
• /
• 2012

A nanofluid is a fluid containing suspended solid particles, with sizes on the order of nanometers. Especially graphene nanoparticle that has the high thermal conductivity properties among the various nanoparticles added to the nanofluid is receiving attention. Graphene is a flat monolayer of $sp^2$-bonded carbon atoms tightly packed into a honeycomb lattice. And are known to have very high thermal conductivity. Therefore, we compared thermal conductivity with viscosity of graphene M-5 nanofluids and graphene M-15 nanofluids. Graphene M-5 and graphene M-15 have different average particle diameters and the other properties are the same. Two kinds of graphene nanofluids was examined by measuring thermal conductivity via transient hot-wire method. And the viscosity was measured by using a rotational digital viscometer. As a result, graphene M-5 nanofluids exhibited better thermal conductivity and viscosity than graphene M-15 nanofluids.

• 한국세라믹학회지
• /
• 제49권5호
• /
• pp.417-422
• /
• 2012

Copper nano particles have been considered as the materials for conductive ink due to its good thermal, electrical conductivity and low cost. However, copper nanoparticles oxidize easily, decreasing dispersion stability and electrical conductivity. Therefore, it is important to develop a method to minimize oxidation of copper nano particles to improve its dispersion stability property in copper nano ink. In this study, copper nano particles were coated with 1-Octanethiol VSAM(Vaporized Self Assembled Multilayers) to prevent oxidation and coated copper powders were dispersed in conductive ink successfully by studying its relationship of different chain length of solvents to 1-Octanethiol coating layer to fabricate nano ink. Various alcohol solvents, such as 1-Hexanol, 1-Octanol, and 1-Decanol were used. The coating layer was observed using FESEM and TEM. Furthermore, dispersion of copper nano particles in nano inks, was characterized using Turbiscan analyzer, viscometer, and contact angle measurement tool.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.41-46
• /
• 2009

The rheological properties of highly concentrated Ag nano sol depending on particle size were studied. The Ag nano sol was prepared by reducing the Ag ion in aqueous solution. The size of Ag nano particle was controlled by two steps of nucleation and growth, and the thickness of adsorption layer was varied by molecular weight of polyelectrolytes. The polyelectrolytes acted as not only ionic complex agent in ionic state and but also dispersant after formation of Ag nano sol. The effective volume was controlled by combination of varying the molecular weight of polyelectrolytes and the size Ag nano sol. The particle size and the viscosity of nano sol were characterized by particle size analyzer, HR-TEM and cone & plate viscometer. It was found that the 10 nm and 40 nm-sized Ag nano sols were prepared by controlling the nucleation and growth steps, respectively. Finally, we could prepare highly concentrated Ag nano sol over 50 wt%.

• Fibers and Polymers
• /
• 제3권1호
• /
• pp.1-7
• /
• 2002

Cellulose carbonate was prepared by the reaction of cellulose pulp and $CO_2$ with treatment reagents, such as aqueous $Zncl_2$ (20-40 wt%) solution, acetone or ethyl acetate, at -5-$0^{\circ}C$ and 30-40 bar ($CO_2$) for 2 hr. Among the treatment reagents, ethyl acetate was the most effective. Cellulose carbonate was dissolved in 10% sodium hydroxide solution containing zinc oxide up to 3 wt% at -5-$0^{\circ}C$. Intrinsic viscosities of raw cellulose and cellulose carbonate were measured with an Ubbelohde viscometer using 0.5 M cupriethylenediamine hydroxide (cuen) as a solvent at $20^{\circ}C$ according to ASTM D1795 method. The molecular weight of cellulose was rarely changed by carbonation. Solubility of cellulose carbonate was tested by optical microscopic observation, UV absorbance and viscosity measurement. Phase diagram of cellulose carbonate was obtained by combining the results of solubility evaluation. Maximum concentration of cellulose carbonate for soluble zone was increased with increasing zinc oxide content. Cellulose carbonate solution in good soluble zone was transparent and showed the lowest absorbance and the highest viscosity. The cellulose carbonate and its solution were stable in refrigerator (-$5^{\circ}C$ and atmospheric pressure).