• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1193-1194
• /
• 2008

In this paper, we propose application training kit using parallel port circuit of standard architecture in computer system. The proposed training kit is verified through the design of hardware board and a virtual driving test using GUI method in VC++ under window XP operating system.

• 한국전산유체공학회지
• /
• 제15권3호
• /
• pp.9-15
• /
• 2010

In this study, we calculated arc discharges and flow characteristics driven by arcs in a thermal puffer chamber, which is one of most outstanding high-voltage interrupters, for understanding the complex physics and the probability of thermal breakdown. The four main parts of arc model for this virtual-reality are radiation, PTFE ablation, Cu evaporation, and turbulence. Among these important parts the turbulence model can be critical to the reliability of computation results during the whole arcing history because the plasma flow is affected by high heat energy and mass momentum. Two turbulence models, the Prandtl's mixing length model and the standard $k-\varepsilon$ model, are applied for these calculations and are compared with pressure-rise inside chamber and arc voltage between the contacts as well as flow characteristics near current zero.

• 한국통신학회논문지
• /
• 제12권4호
• /
• pp.325-334
• /
• 1987

PIN 다이오드를 利用한 反射形 移相器는 4端子網 임피던스 變換回路로 構成될 수 있는데 원하는 移相量을 얻기위한 設計方程式 誘導에 假想 임피던스法을 적용하였다. 실제로 2-bit($22.5^{\circ}$와 $45^{\circ}$)하이브리드 移相器를 設計 具現하여 中心周波數(10GHz)에서 $22.5^{\circ}$bit는 $0.5^{\circ}$, $45^{\circ}$bit는 $0^{\circ}$의 移相量 誤差의 것을 얻었으며 main beam 制御用 phased-array안테나를 위한 移相器設計에 이 方法을 사용할 수 있음을 立證하였다.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.201-211
• /
• 2002

In this research, we are trying to research about hydraulic system design and vehicle dynamic modeling far the development of the tire roller. The reason why we would like develop it is that tire roller is one of the most useful machine for the road construction site and application other construction equipments. Here, we conceptualize the new hydraulic system and derive the equations of motion fur dynamic analysis and also investigate system modeling by using a DAQ board. We design the hydraulic circuit of steering and traction mechanism system. This design can be used to create virtual prototypes of construction equipment. So, we studied tire roller to integrate development technology. In system analysis, we formulate hydraulic traction system model and hydraulic steering system model. Also, we integrate DAQ system to acquire experimental results in real tire roller equipment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.529-532
• /
• 2000

This paper addresses how to be connected with end-to-end shortcut using ATM Switched Virtual Connection (SVC) in ATM-based Multi-Protocol Label Switching (MPLS) Networks. Without additionally existing ATM Ships-in-the-Night (SIN) mode, when the stream is continuously transmitted at the same destination with the lapse of determined aging time, the connection is changed with end-to-end shortcut connection using ATM signaling. An ATM direct short circuit is performed an IP and ATM effective integration. An ATM shortcut has a number of advantages, like higher throughput, shorter end-to-end delay, reduced router load, better utilization of L2 Quality of Service (QoS) capabilities, and route optimization. In particular between other MPLS domains, this can be efficiently improved the performance of networks.

• 한국통신학회논문지
• /
• 제26권6A호
• /
• pp.1060-1066
• /
• 2001

레이어2 스위칭과 레이어3 라우팅의 통합 모델로써 MPLS(Multi-Protocol Label Switching) 환경에서 ATM LSR(Label-Switching Routers)은 백본망에서의 고속 전송이 가능하여 현재의 라우터 구조로써 제안되어지고 있다. MPLS가 코어 라이터로써 적용이 될 경우 확장성을 위해 label merging이라는 기술이 필요하다. VC(Virtual Circuit) merging은 ATM LSR에서 많은 IP 라우터를 하나의 라벨로 매핑을 시키며 수천 개의 목적지에 전송할 수 있는 확장성 있는 매핑 기술이다. VC merging은 같은 목적지인 다른 패킷들 간의 셀들의 섞임을 방지하기 위해 재 조합 버퍼가 요구된다. 재 조합 버퍼 사용시 일시적인 체증 현상이 발생하며 Non-VC merging과 비교시 많은 셀 손실과 많은 버퍼를 요구하게 된다. 본 논문에서는 RED(Random Early Detection) 알고리즘을 적용하여 VC merging이 필요한 버퍼의 요구량과 셀 손실을 줄였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.150-155
• /
• 2005

In recent years, as the demands of VBNS(Very high speed Backbone Network Service) and VDSL(Very high-data rate Digital Subscriber Line) increase, the development of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, WDM elements increase. The alignment and the attachment technology are very important to fabricate the optical elements for communication. In this paper, the mechanism of rotational stage are studied. with the three different method and the results of them are applied to the design of the system. The performance test of resolution and travel is performed.

• 산업경영시스템학회지
• /
• 제24권62호
• /
• pp.11-20
• /
• 2001

At the initial deployment of B-ISDN, the heterogeneity of services and the bandwidth requirement make dimensioning of B-ISDN much more complicated than the dimensioning of homogeneous circuit or packet switched networks. Therefore B-ISDN must be extended gradually according to future telecommunication technology or service demands. In this paper, we propose a mathematical formulation for dimensioning problem of B-ISDN extension, considering the characteristics of ATM(Asynchronous Transfer Mode) such as various quality of services, the statistical multiplexing effects of VPCs(Virtual Path Connections) and the modularity of transmission links allocated when new B-ISDN nodes are given. The algorithm based on the simultaneous linear approximation technique and Lagrangian relaxation method and some numerical results are also presented.

• 한국시뮬레이션학회논문지
• /
• 제7권1호
• /
• pp.15-26
• /
• 1998

In building a shell-based FMS, which is known as one of the top-down approaches in the field of factory automation, we may take a hybrid simulation into consideration. The modeling of a hybrid simulation consists of real physical entities, virtual simulation, and central clock algorithm, etc. to carry out the whole system operation. In this paper, we sow a way to construct a hybrid simulation software system in manufacturing environments. We bring in the object-oriented methodology in system design and it can contribute in dealing with a wide variety of production types and configurations. Some classes such as project, product, process, order, schedule, stage are defined. These are used and tested by implementing a specific LSI circuit assembly line process.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 춘계학술발표회 논문집
• /
• pp.119-124
• /
• 1986

This paper describes the development of the KORNET that may be regarded as the latest public packet-swiched computer communication network. The KORNET project included the development of the network management center (NMC), a network concentrator. For the KORNET we use the virtual circuit(VC) method, a distributed adaptive routing algorithm, and a dynamic buffer management algorithm. The NMC acts as a nerve center of the network, performing such function as network monitoring, subscriber and network management and routing management, etc. As for the NNP and NC hardware, we have implemented them with the 16-bit multitask/multiprocessor technology using MC68000 microprocessors. Softwares have been developed using C language is required for real time processing. All the network protocols we have developed comply completely with the latest CCITT recommendations including X.25, X,3 , X.28 and X.29.