• Korea-Australia Rheology Journal
• /
• 제19권2호
• /
• pp.81-88
• /
• 2007

Blends of collagen dispersion (COL) with poly(vinyl alcohol) (PVA) in different weight ratios were investigated by oscillatory rheometry, Fourier transform-infrared spectroscopy and scanning electron microscopy. It was found that even with 80% of PVA, the COL/PVA blends behaved more like collagen dispersion than pure PVA solution in the dynamic thermal and frequency processing, for instance, a dominant elastic appearance (G'>G"), a similar shear thinning behavior and the thermal denaturation below $40^{\circ}C$. However, influence on the blend behaviour by PVA was noticeable, for instance, an increase of dynamic denaturation temperature, the decreasing intensity of amide I, II and III bands as well as the diminishing irregular pores on the surface of blends. The interaction between collagen and PVA could be observed, especially at the regions with low content or high content of PVA.

• Elastomers and Composites
• /
• 제35권2호
• /
• pp.106-114
• /
• 2000

상온에서의 충격 흡수특성과 compression set 특성을 향상시키기 위하여 ethylene vinyl acetate copolymer (EVA)와 styrene vinyl isoprene styrene triblock copolymer (SVIS)를 블렌드하여 발포체를 제조하였다. 발포제 및 EVA/SVIS 블렌드비가 발포배율 및 기계적 물성에 미치는 영향을 조사하였다. SVIS 함량이 증가함에 따라 블렌드의 점도는 증가하였고 가교 속도는 감소하였으며, 발포배율은 감소하여 비중은 증가하였다. 발포제 함량 증가, 즉 발포배율 증가에 따른 반발탄성은 변화가 없는 반면에, SVIS 함량 증가에 따라 발포체의 상온에서의 tan ${\delta}$ 값은 증가하였으며 따라서 반발 탄성은 감소함을 알 수 있었다. EVA/SVIS 블렌드 발포체에서 SVIS 함량 증가에 따라 가교밀도와 비중이 증가하므로 compression set 값도 낮은 값을 나타내었다.

• 패션비즈니스
• /
• 제1권3호
• /
• pp.19-34
• /
• 1997

The role of fashion image in modern society is being diversified from product planning to consumer satisfaction. In this research, after surveying female college students, the diversified modern fashion image was patterned. On the analogy of the relationship between these patterned image and design factors, the following conclusion was obtained. 1. The most popular styles are jacket and pants suits, three-piece outfits, tight mini-skirts and X-silhouette. Little decoration is used in general. simplicity is shown as trend by utility fabrics in single color-black, brown, beige and blue-with no pattern. Various materials such as wool, cotton, wool or cotton blended with other materials, silk, satin, knit, lace, vinyl and leather are used. 2. Fashion image is divided into four factors; factors that show fad, dignity, activity and simplicity. 3. Factors that show fad; style of tops, material of bottoms and length of bottoms reflect fad. blousons, three-piece outfits, pants rather than skirts, X-silhouette and mini-skirts are prevailing. Vinyl, leather, knit, lace and satin are the materials well used. 4. Factors that show dignity; Style and material of tops, the way of top and bottom pieces are matched and length of bottom or pieces reveal the characteristics. Jackets, blouses, half-coats and one-piece outfits rather than two-pieces are popular. Tight skirts in natural or midi length or pleated skirts are common. Wool, wool blended with other materials, leather and X-silhouette are design factors that reveal dignity well. 5. Design factors that show active image; Straight pants, three-piece outfits, T-shirts, shirt -blouses, vests, and blausons are popular. Knit and lace are used for tops, leather and vinyl are used for bottom pieces and cotton is widely used. Y- or H-silhouette are used to show active image.

• 접착 및 계면
• /
• 제19권1호
• /
• pp.5-12
• /
• 2018

본 연구는 선처리제 공정을 생략하고 우수한 접착 특성을 가지는 합성피혁용 스킨(skin) 수지제조에 관한 것으로 이성분계 혼합 폴리우레탄 수분산체를 제조하여 이에 대한 선처리제(primer)를 생략한 접착 시편의 접착특성을 평가하는 것이다. 이성분계 혼합 폴리우레탄 수분산체의 제조는 에스터(ester)계 폴리우레탄 수지(PU-T)와 카보네이트(carbonate)계 폴리우레탄 수지(PU-C)를 각각 합성하고 이를 배합함으로써 최종 수지를 얻었다. 선처리제를 생략한 접착시편의 접착강도 측정결과, 우수한 상태접착강도 (Ethylene vinyl acetate(중창): $4.2kg_f/cm$, 고무(겉창) : $4.4kg_f/cm$)를 가짐을 확인할 수 있었다. 이는 신발 제조 공정에서 필수불가결하게 사용되었던 선처리제(primer) 공정을 생략가능하게 함으로써 공정의 단축과 선처리제(primer)에서 발생되는 휘발성유기화합물 (VOCs)의 감소를 가져와 친환경적인 장점을 지닌다.

• Elastomers and Composites
• /
• 제56권4호
• /
• pp.209-216
• /
• 2021

In this study, we observed the mechanical properties, thermal stability, and low temperature sealing performance of fluorosilicone elastic composites. When the blend ratio of Phenyl vinyl methyl silicone (PVMQ) was increased, the tensile strength, modulus at 100%, and compression set were decreased. The thermal stability of fluorosilicone elastic composites showed a similar tendency. These were caused by poorer green strength of PVMQ than Fluorosilicone rubber (FVMQ). The change in the tensile strength and elongation at -40℃ showed a decreasing tendency with increasing PVMQ blend ratio. By increasing the PVMQ blend ratio, low-temperature performance was improved. The Dynamic mechanical analysis (DMA) results showed that T_g was decreased and low-temperature performance was improved with increasing PVMQ blend ratio. However tanδ was decreased becaused of the poor green strength and elasticity of PVMQ. From a hysteresis loss at -40℃, the hysteresis loss value was increased and fluorosilicone elastic composites showed the decreasing tendency of elasticity with increasing PVMQ blend ratio. From the TR test, TR10 was decreased with increasing PVMQ blend ratio. FS-4 (45% PVMQ blended composites) showed a TR10 of -68.0℃ that was 5℃ lower than that of FS-1 (100% FVMQ). The gas leakage temperature was decreased with increasing PVMQ blend ratio. The gas leakage temperature of FS-4 was -69.2℃ that was 5℃ lower than that of FS-1. Caused by the polymer chain started to transfer from a glassy state to a rubbery state and had a mobility of chain under T_g, the gas leakage temperature showed a lower value than T_g. The sealing performance at low temperature was dominated by T_g that directly affected the mobility of the polymer chain.

• 분석과학
• /
• 제24권1호
• /
• pp.45-50
• /
• 2011

현장조사 시 증거물을 찾는 방법은 육안관찰과 과학수사장비를 활용하게 된다. 감정에 활용되고 있는 현장 증거물은 혈액, 정액, 타액, 모발, 지문, 섬유, 토양, 페인트 등 그 종류는 매우 다양하며 그 중 지문은 현장 감식을 통하여 직접 현출하여 신속하게 개인을 식별 할 수 있다. 본 연구에서는 일상에서 많이 접할 수 있으면서도 선택적 현출 방법이 필요한 가죽류 지갑, 혁대, 쇼파 등에 대하여 다양한 현출 방법을 이용 검토 한 결과 다양한 가죽의 현출방법으로 자석형광분말법 및 형광분말법을 이용한 잠재지문 현출방법이 효율적인 것으로 확인하였다.

• Macromolecular Research
• /
• 제15권1호
• /
• pp.22-30
• /
• 2007

High water vapor permeable coating materials were prepared by blending aqueous poly(vinyl alcohol) (PVA) solution with waterborne polyurethane-urea (WBPU) dispersions synthesized by prepolymer mixing process. Stable WBPU/PVA dispersions were achieved at PVA content below 30 wt%. As the water soluble polymer PVA content increased, the number and density of total micro-pores (tunnel-like/isolated micro-pores) formed after the dissolution of PVA in water increased, and the water vapor permeability of coated Nylon fabric also increased significantly. Using WBPU/water soluble polymer PVA blends as a coating material and then dissolving PVA in water was confirmed to be an effective method to obtain prominent breathable fabrics.

• Macromolecular Research
• /
• 제17권12호
• /
• pp.1003-1009
• /
• 2009

Copolymers of N-vinylpyrrolidone (NVP) comonomer with styrene (St), hydroxypropyl methacrylate (HPMA) and carboxyphenyl maleimide (CPMI) were synthesized by free radical polymerization using 2,2'-azobisisobutyronitrile (AIBN) initiator in 1,4-dioxane solvent. The copolymers formed were characterized by FTIR, $^1H$ NMR and $^{13}C$ NMR techniques and their thermal properties were studied by DSC and TGA. Copolymer composition was determined by $^1H$ NMR and/or by elemental analysis and monomer reactivity ratios (MRR) were estimated by the linear methods of Kelen-Tudos (K-T) and extended Kelen-Tudos (EK-T) and the non-linear approach. Copolymers of St and HPMA with NVP formed blocks of one of the monomer units, whereas alternating copolymers were obtained in CPMI-NVP, depending upon the side chain substitution. The MRR values are discussed in terms of monomer structural properties such as electronegativity and electron delocalization. The sequence distribution of monomers in the copolymers was studied by statistical method based on the average reactivity ratios obtained by EK-T method.

• 한국의상디자인학회지
• /
• 제6권1호
• /
• pp.64-72
• /
• 2004

The purpose of this paper is to investigate the changing fashion image of the glossy materials including metal, leather, vinyl, latex, plastic etc. from 1960's to the present. Glossy materials used in the second half of the 20th century showed a restricted image combined with a specific social circumstance. They expressed a reflection of young and future-oriented space period of 1960s. Many designers like Paco Rabanne and Andre Courreges were concerned with the fashion of space age and expressed that image with leather and synthetic materials including silver leather, metal chain armor, and plastic appeared as the keynote of fashion. In 1970's, glossy material was the symbol of avant-garde and rebellious attitude by the punk fashion. They maximized glamourous look of 1980s, and cyber look with an expectation for a new millenium of 1990s. On the other side, glossy materials seem to be used as a source of various inspiration of fashion designer in the 21st century. Also, some of the past images, for example space look and glamourous look, are revived in the 21 st century by the form of modified design.

• Elastomers and Composites
• /
• 제51권3호
• /
• pp.212-217
• /
• 2016

Influence of poly(ethylene-co-vinyl acetate) (EVA) types and cure systems on cure characteristics of foaming EVA compounds were investigated. Three kind EVAs with different VA contents were employed. Influence of triallyl cyanurate (TAC) and dicumylperoxide (DCP) content on the cure characteristics were examined. The minimum torque ($T_{min}$) and delta torque (${\Delta}T$) decreased as the VA content increased. The ${\Delta}T$ was increased by adding TAC and by increasing the DCP content. For the foaming EVA compounds without TAC, the cure times such as the minimum cure time ($t_{min}$), scorch time ($t_2$), and optimal cure time ($t_{90}$) did not show a specific trend according to the DCP contents. For the foaming EVA compounds containing TAC, the cure times decreased as the DCP content increased. From the experimental results, it was found that efficienct DCP/TAC ratio for improvement of the crosslink density was 1.1~2.0.