• 한국항공우주학회지
• /
• 제33권4호
• /
• pp.57-62
• /
• 2005

인공위성의 outgassing 분자에 대한 역류오염 해석에는 BGK 또는 DSMC 등의 방법이 사용되어 왔으나, 이들은 해석이 복잡하고 시간이 오래 걸리는 등의 비효율성이 문제이다. 본 논문에서는 분자들의 충돌간 평균자유행로가 위성체의 크기에 비해 매우 길고, 동시에 위성체의 속도가 분자들의 열속도보다 매우 크다는 점을 이용하여, 간단한 근사모델을 도입함으로써 일반적인 view factor 법과 비슷한 편리성과 간편성을 가지면서 DSMC법과 정확하게 일치하는 결과를 주는 modified view factor 법을 개발, 제안한다.

• KIEAE Journal
• /
• 제6권4호
• /
• pp.3-10
• /
• 2006

To preserve scenic-view of Gwanak Mountain from the urban development, the viewshed component ratio and the scenic-view preference are investigated and analyzed by selecting view points at Nangokro. After 16 candidate view points are selected from the site, sight component ratio is measured through visual structure analysis and preference are measured by using the Likert scale. In addition, factor analysis, and regression analysis were conducted to examine the relationship between influencing factors and preference. As a result of the regression analysis of the 9 factors to influence the scenic-view preference, two factors such as degree of natural landscape and degree of arrangement around the site are chosen to influence the scenic-view preference. Through the preference factor analysis, two preference factors are selected as follows; 1) The factor of the landscape formation - Existence and nonexistence of the scenic-view conservation, degree of the landscape opening, and degree of natural landscape, degree of the landscape originality, and degree of the landscape sequence, degree of the landscape intimacy 2) The factor surrounding the landscape - Degree of arrangement around the site, degree of the landscape complexity, and atmosphere around the site.

• 한국초등수학교육학회지
• /
• 제24권3호
• /
• pp.259-277
• /
• 2020

본 연구의 목적은 초등학교 교사들의 수학적 신념 측정도구를 개발하는 것이다. 초등학교 교사 299명의 수학적 신념을 30문항을 통해 분석하였다: 수학에 대한 신념 12 문항, 수학 교수에 관한 신념 18 문항. 탐색적 요인분석을 통해 (n = 149) 수학적 신념의 요인 구조를 탐색하였다. 또한 확인적 요인분석을 통해 (n = 150) 서로 다른 세 모델의 요인 구조를 비교 분석하였다. 분석 결과 14개 문항으로 구성된 네 개의 요인 구조가 데이타를 가장 잘 설명하는 것으로 나타났다: 전달적 수학관(transmissive view of mathematics), 구성주의적 수학관(constructivist view of mathematics), 전달적 수학 교수관(transmissive view of teaching and learning), 구성주의적 수학 교수관(constructivist view of teaching and learning). 본 연구의 결과를 바탕으로 개발된 측정도구가 초등학교 교사의 수학적 신념을 측정하기 위한 타당성과 신뢰성을 갖춘 것으로 나타났다. 이를 토대로 본 연구의 시사점을 논의하였다.

• 한국항공우주학회지
• /
• 제43권12호
• /
• pp.1079-1088
• /
• 2015

본 연구는 한국항공우주연구원에서 개발한 위성종합설계 SW 내의 복사계수 계산 프로그램의 병렬화 및 성능향상에 대해 논의한다. 복사계수는 복사열전달이 포함된 인공위성의 열해석을 수행하기 위한 필수적인 전초 단계로서 그 자체적인 계산량 또한 상당하다. 특히 위성 궤도상 시간에 따라 태양전지판과 본체의 상대변위가 변하기에 시간 별 독립적인 복사계수의 계산이 필요하다. 본 논문은 복사형상계수 병렬화 방법과 그 성능, KD-Tree 기반 차폐 탐색 알고리즘 및 태양전지판과 본체의 상대변위 변화에 따른 부분 복사형상계수 행렬 갱신이라고 지칭하는 계산량 저감 기법에 대해 논한다.

• 한국의류학회지
• /
• 제15권4호
• /
• pp.341-349
• /
• 1991

This study was done to provide basic data for clothing design and thus to contribute to the academic development of the clothing and textile area. The focus of this study was to charac­terize the somatotype based on each individual's lateral view. For this purpose, firstly, categorization of the subjects based on their lateral view and definition of each category, secondly, characterization of each somatotype, and thirdly, sugges­tion of the deterministic criteria of each category were complished. The subjects in this study were female college students of 18 to 26 year-old whose somatotypes were comparatively invariable after cessation of physical growth. The metrical items characterizing upper body lateral view were chosen. Data were collected through Anthropometry and Photometry and analyzed by Factor analysis. The results were as follows; 1. Each subject's side view contour was classified as straight type, lean-back type, bend­forward type, and swayback according to its position to the relative plumb line. Straight type was defined as the type in which the plumb line passes through the lobe of the ear, the shoulder joint, and the mid abdominal region laterally. Lean-back type positioned the plumb line more posteriorly than straight type. Bend-forward type positioned the plumb line more anteriorly than straight type. Swayback positioned the plumb line at about the same line as straight type. And curvature of side view contur was more prominent in this type than in straight type. 2. Seven factors were figured out. The first factor was representing upperbody volume, and the second factor was representing size, the third factor was horizontal distance from lateral view representing size view contour. The fourth factor was front body length, the fifth factor was back body length. The sixth factor was shoulder length and shoulder width representing shoulder shape. The seventh factor was the bust shape.

• 한국의류학회지
• /
• 제22권3호
• /
• pp.333-340
• /
• 1998

The purpose of this study was to classify the lower body somatotype based on the side view and to analyze the characteristics of each somatotype. The subject were 234 Korean Junior High School Girls. Data were collected through photographic sources and analyzed by factor analysis, cluster analysis and analysis of variance. The result of factor analysis indicated that 4 factors were extracted through factor analysis and those factorscomprised 73.5% of total variance. Using factor scores, cluster analysis was carried out and the subject were classified into 3 clusters. Each cluster was classified as their lower bobs side view contour.

• 한국항행학회논문지
• /
• 제16권6호
• /
• pp.944-951
• /
• 2012

위성항법의 가시성, Dilution of Precision (DOP), 신호대잡음비 등과 같은 위치결정 성능지표는 개활지 환경과 같이 항법위성의 가시성이 좋은 지역에서 그 활용도가 높으며, 육상교통환경의 경우 그 활용도가 낮다. 본 논문은 육상교통환경에서 위성항법 신호를 활용하여 위치결정을 수행하는 경우 활용도가 높은 성능지표로 Sky View based DOP (SVDOP)을 제안한다. SVDOP은 Sky-View Factor(SVF)를 응용하여 개발되었으며, 기존의 SVF의 문제점을 극복할 수 있다. Sky-View 영상을 활용하여 특징점을 선택하고 이를 활용하여 DOP를 계산할 수 있다. 제안된 방법을 이용하는 경우 SVF 사용보다 육상교통환경에서 위치결정 성능 예측에 용이함을 확인할 수 있다.

• 한국항공우주학회지
• /
• 제45권8호
• /
• pp.678-685
• /
• 2017

지구관측위성에 탑재되는 자료처리/저장장치 방열판은 장비의 주기적인 고발열, 배치, 장착성 등 설계 특성으로 인해 쉴드가 장착된 홈 형태를 갖는다. 홈 형태 방열판의 영향성과 쉴드 방열판의 열성능을 확인하기 위해, 평판 방열판을 기준으로 홈 형태의 방열판과 쉴드 방열판을 비교하여 열진공 시험을 실시하였다. 시험결과를 바탕으로 view factor에 의한 열교환과 방열판의 온도를 이론해석적으로 분석하여 열 설계 성능비교의 타당성을 입증하였다.

• 복식문화연구
• /
• 제8권5호
• /
• pp.668-680
• /
• 2000

The study presents the general types and individual differences of the shape of the adult women's neck and shoulder in our country. It is based on the average value, the standard deviation, the maximum value, the standard deviation, the maximum value, the minimum value and c.v. measured from the women at the age of 19 through 64. The results of this study are as follows ; 1. The factors by factor analysis are five. The first is the size factors of the neck and shoulder. The second is shape factor of neck. The third is plane view and length factor of the neck. The fourth is the side view factor of the neck and shoulder. The fifth is the shape factor of shoulder. Therefore the shape of the neck and shoulder should be examined in the shape factors as well as in the size factors as well as in the size factors for the designing body-suitable clothes. 2. The factors of the concrete objects are the solid view of neck and shoulder, the cross-sectional view of neck line, side view of neck and shoulder and length of neck. The explainable measuring items for the factors are the difference of the length between lower neck round line and the 4㎝ above neck round line, the length of neck, the angle of inclination between fore neck and back neck, the angle of inclination of the side shoulder, the difference of the height between fore neck point and back neck point, the width of shoulder, the width of chest and the width of back. 3. The concrete objects of the neck and shoulder have five types ; Type Ⅰ is average type, Type Ⅱ is thick short neck and the drooping shoulder type, Type Ⅲ I is slender long neck and lean-back shoulder type, Type Ⅳ is thick and rising shoulder type and Type Ⅴ is slender and drooping shoulder type.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2044-2049
• /
• 2007

In order to predict the thermal radiation induced from alumina particle cloud in the plume of solid propellant motor, view factor method is applied to space shuttle SRB and the result is compared with that of monte carlo method. For this purpose, radiative characteristics, such as particle cloud temperature distribution, effective emissivity or emissive power of particle cloud are studied. In the case of effective emissivity, inverse wavelength method is applied and plume reduction characteristic length is used for emissive power distribution. As a result, thermal radiation using view factor method gives more conservative results than that using monte carlo method. So it can be used for preliminary design of thermal protection system.