• Tribology and Lubricants
• /
• 제8권1호
• /
• pp.48-55
• /
• 1992

The friction characteristic of plastics (PTFE, Nylon, Acetal and phenolic) was studied on the lubricated condition with a pin on disk machine. Mineral oil without additive (base oil) and water were used as liquid lubricants at the controlled temperature. From the experimental work, it was found out that the coefficient of friction of plastics was controlled by the mechanical properities of plastic more than that of liquid for various load and temperature. Viscosity of liquid has affected on the friction only at low temperature under lighb load. Among the tested plastics, the coefficient of friction of PTFE was the lowest under light load and at low temperature while Nylon at medium load and temperature, and Acetal at heavy load and high temperature. The coefficient of friction of soft plastics like PTFE and Nylon were increased as the load and temperature were increased, while that of hard plastic (Acetal) was decreased and that of thermo setting plastic (phenolic) was mixed. Also for soft plastics, the coefficient of friction under heavy load was always higher than that under light load, while hard plastic was vice versa.

• ETRI Journal
• /
• 제17권1호
• /
• pp.23-36
• /
• 1995

We present a performance evaluation model of cell reassembly mechanism in an ATM switching system. An ATM switching system may be designed so that communications between processors of its control part can be performed via its switching network rather than a separate inter-processor communications network. In such a system, there should be interface to convert inter-processor communication traffic from message format to cell format and vice versa, that is, mechanisms to perform the segmentation and reassembly sublayer. In this paper, we employ a continuous-time Markov chain for the performance evaluation model of cell reassembly mechanism with individual buffering, judicially defining the states of the mechanism. Performance measures such as message loss probability and average reassembly delay are obtained in closed forms. Some numerical illustrations are given for the performance analysis and dimensioning of the cell reassembly mechanism.

• 한국CDE학회논문집
• /
• 제9권3호
• /
• pp.266-275
• /
• 2004

In this paper, a method for generating the planar developments of three-dimensional shoe upper surfaces is proposed. This method is based on the optimization technique minimizing the geometric error occurred on the developed planar surface. Additionally, a rapid mapping algorithm to transform a curve on flattened plane to original surface (or vice versa) is proposed. These techniques are implemented on the 2D/3D integrated shoe design system. Using this system, a prototype running shoe can be designed more precisely and can be manufactured more quickly.

• Journal of Magnetics
• /
• 제5권2호
• /
• pp.35-39
• /
• 2000

The correlation between the activation volumes of wall-motion and nucleation processes in Co/Pd multilayers has been investigated. Each activation volume was estimated from the field dependence of the wall-motion speed and the nucleation rate, respectively, based on time-resolved domain patterns grabbed by a MOKE microscope system. Both the activation volumes are changed in the same manner around $0.2\sim1.1\times10^{-17}cm^3$ with changes in the multilayered structure. Interestingly, the correlation between the activation volumes is sensitive to the multilayered structure; the wall-motion activation volume is smaller than the nucleation activation volume for a sample having a smaller number of repeats and a thinner Co-layer thickness, and vice versa. The correlation is closely related with the contrasting reversal modes; the process having the smaller activation volume dominates.

• 대한가정학회지
• /
• 제17권4호
• /
• pp.107-115
• /
• 1979

A statistical study was carried out in order to find out the correlation between various factors affecting the attitude of young college girls to their marriages, such as their environment and the degree of their parent's satisfaction in their marriage life. For the study, 264 college girls were sampled at random from the population of college girls in Daejeon area. The instruments used in the research are questioning paper , which the investigators made. Following correlations were found as a result. (1) a significant correlation between the birth order of girls and those of male mate and earlier marriage in the bigger residential district. (2) Preferrence in larger family planning tendency in the group of girls from large family and vice versa in the group of girls little educated mothers. (3) More traditional attitude to future marriage planning in the group of girls of lower birth order and with better economical background. (4)There were no significant correlations between the degree of their parent's satisfaction and their marriage life planning.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.268-271
• /
• 2004

The phase transition from amorphous to crystalline states, and vice versa, of $Ge_2Sb_2Te_5$ films by applying electrical pulses have been studied. This material can be used as nonvolatile memory. The reversible phase transition between the amorphous and crystalline states, which is accompanied by a considerable change in electrical resistivity, is exploited as means to store bits of information. The nonvolatile memory cells are composed of a simple sandwich (metal/chalcogenide/metal). It was formed that the threshold voltage depends on thickness, electrode distance, annealing time and temperature, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.118.2-118
• /
• 2001

This research describes a development of laser distance sensor with precise resolution even in the case that the object surface has some curvature. There are typical two methods in measuring the distance by using laser light source, so called time of flight and optic-triangular methods. Both methods have an advantage and a disadvantage each other. In general, the time of flight method produces wide range of the measurement, but low accuracy. The other method is vice versa. In this research, the optic-triangular methods with one-dimensional CCD cell are proposed to obtain the precise distance measure from the sensor the surface of the curved object ...

• 대한전자공학회논문지
• /
• 제21권6호
• /
• pp.56-63
• /
• 1984

본 논문에서는 GRAFCET로 기술된 병렬 sequence를 갖는 순서 논리 시스템을 Programmed logic에 의해 실현하는 방법을 제안한다 이를 위해 먼저 병렬 sequence를 갖는 GRAFCET를 그 본래의 물리적 의미를 변형치 않고 다수의 state graph로 재구성하는 알고리즘을 제안했으며 이 제안된 알고리즘은 모든 형태의 GRAFCET에 적용 가능하며 특히 sub-system으로의 분해 및 그 역과정을 손쉽게 한다. 다음 이와같이 재구성된 state graph를 ROM을 사용한 microproerammed logic에 의해 구성하는 조직적인 방법을 제시했으며 이 제시된 구성 방법은 선택 sequence의 수를 임의로 확장할 수 있다.

• Journal of applied mathematics & informatics
• /
• 제6권3호
• /
• pp.783-798
• /
• 1999

Nondeterministic finite Rabin-Scott's automata without initial and final states (2 $\omega$-FA) are considered. In this paper they are used to define so called sets of obstruction used also in various alge-braic systems and to consider similar problems for the formal languages theory. Thus we define sets of obstructions of languages(or, rather, 2$\omega$-languages) of such automata. We obtain that each 2$\omega$-language defined by 2 $\omega$-FA has the set of obstruction being a regular language. And vice versa for each regular language L(containing no proper subword of its another word) there exists a 2$\omega$ -FA having L as the set of obstructions.

• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.1-8
• /
• 2001

Performance of a rectangular fin is investigated by a three dimensional analytical method. Heat loss and the temperature obtained from the three dimensional analysis are compared with those calculated from a two dimensional analysis. Fin effectiveness, fin resistance and fin efficiency for the rectangular fin are presented as a function of non-dimensional fin length and fin width. The results are obtained in the following : (1) heat loss calculated from the two dimensional analysis is the same as that obtained from the three dimensional analysis with adiabatic boundary condition in z-direction, (2) heat loss obtained from the two dimensional analysis approaches the value for the three dimensional analysis as the non-dimensional fin width becomes large, (3) fin effectiveness increases as non-dimensional fin length increases and non-dimensional fin width decreases, and vice versa for fin efficiency.