• Structural Engineering and Mechanics
• /
• 제54권3호
• /
• pp.545-560
• /
• 2015

In this paper, blast-induced vibration effects on buildings located in rural areas were investigated. Damages to reinforced concrete, adobe and masonry buildings were evaluated in Çatakk$\ddot{o}pr\ddot{u}$ and Susuz villages in Silvan district of Diyarbakir, Turkey. Blasting of stiff rocks to construct highway at vicinity of the villages damaged the buildings seriously. The most important reason of the damages is lack of engineering services and improper constructed buildings according to the current building design codes. Also, it is determined that, inappropriate blast method and soft soil class increased the damages to the buildings. The study focuses on four points: Blast effect on buildings, soil conditions in villages, building damages and evaluation of damage reasons according to the current Turkish Earthquake Code (TEC).

• Journal of Mechanical Science and Technology
• /
• 제15권10호
• /
• pp.1408-1416
• /
• 2001

It is very important to well understand the dynamic characteristics of damaged structures to successfully develop or to choose a most appropriate structural damage identification method (SDIM) as the means of non-destructive testing. In this pope., the dynamic equation of motion for damaged plates is derived by introducing a damage distribution function, which may characterize the effective state of structural damages. It is found that structural damages may induce the coupling between modal coordinates. The effects of damages on the vibration characteristics of a plate depending on their locations, sizes, and magnitudes are numerically investigated in a systematic way. The numerical investigations are also given to the effects of damage-induced modal coupling on the changes in vibration characteristics and to the minimum number of natural modes required to predict sufficiently accurate vibration characteristics of damaged plates.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.357-362
• /
• 2000

Though there have been many researches to investigate the relationship between the damage location, damage size and the changes in eigenparameters, there have been few studies on the small-sized damages. Thus, this paper considers the plate with small local damages. The equation of motion for damaged plate is derived in terms of the damage distribution function and then the effects of small damages on the dynamic characteristics of plate are investigated. It is observed that the damage-induced modal coupling and a sufficient number of vibration modes should be considered especially for small damage detections.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권6호
• /
• pp.113-123
• /
• 2006

사장교가 장경간으로 시공됨에 따라 대형화 되고 지진하중, 풍하중 및 차량하중 등 동적 하중에 의해 유발되는 진동현상에 취약한 단점이 나타난다. 이러한 하중 등에 의해 발생된 구조 손상은 구조물의 진동모드 특성에 영향을 미치게 된다. 기존의 정밀안전진단 기술을 이용하여 사장교의 구조 손상을 검색하고 평가하는 것은 상당한 비용과 시간이 소요될 뿐만 아니라 전체적인 구조거동 특성의 변화를 발견하기 어려울 것이다. 따라서 본 연구는 사장교에 대하여 구조손상 전의 진동모드 특성치와 구조손상 후의 진동모드 특성치를 이용하여 구조거동 특성의 변화를 검토하고 구조손상 검색을 수행하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.351-356
• /
• 1997

With the aid of advanced structural engineering, the construction of infrastructures has been recently accelerating to keep up with rapid economic growth. Construction activities and operation of transportation facilities cause civil petitions associated with vibration-induced damages or nuisances. As part of the decrease of vibration induced damage, the objective of this study is to develop vibration-controlled concrete with vibration-reduced materials, which can be recycled from obsolete materials, such as aged tires, plastics and etc. Appropriate mix proportion has been used for making 10 reinforced concrete panels with vibration-reduced materials, which have been tested to investigate on vibration reduction capability, based on the time and frequency domain analysis, and vibration velocity level analysis. Vibration-reduced mixtures are latex, styrofoam, rubber powder and plastic resin, which have been determined to by reduce vibration.

• 한국농공학회논문집
• /
• 제60권4호
• /
• pp.55-62
• /
• 2018

Problems on vibration due to blasting for infrastructure development are getting important because of a civil appeal. Blasting-induced vibration is representative construction pollution, hence, it is possible that a number of environmental damages occur. In this study, borehole test blasting was conducted at Sintanjin area, Daejeon and square root equation with 95% confidence level was proposed for prediction of blasting-induced vibration. The vibration value predicted from this equation was more conservatively evaluated than the values predicted from U.S. Department of Interior, Bureau of Mines (USBM) and Nippon Oil & Fats Co., Ltd. (NOF) equations. Therefore, the proposed equation in this study seems to contribute for safety blast design. However, for optimal blast design, inducing equation for prediction of blasting-induced vibration through the identical test blasting with field construction such as rock slope blasting would be required.

• 콘크리트학회지
• /
• 제8권5호
• /
• pp.123-133
• /
• 1996

최근의 각종 사회시설의 확충에 따른 건설공사 및 교통시설 등은 많은 진동을 유발하여 사회적인 문제를 야기하고 있는 실정이다. 본 연구는 각종 제진재료를 이용하여 진동을 억제할 수 있는 콘크리트를 개발하여 각종 건설공사에서 흔히 발생할 수 있는 진동공해문제를 억제하고자 하며 아울러 폐기물의 재활용차원에서 폐자재를 이용하여 유용한 제진콘크리트를 개발하고자 하는데 그 목적이 있다. 우선, 제진재료를 이용한 압축강도 200kg/$\textrm{cm}^2$ 이상의 콘크리트 배합비를 찾기 위하여 Pilot실험을 수행하였으며, 선정된 적정배합비에 다른 진동시험제를 제작하여 재료의 동적특성 즉, 1차공명진동수, 동탄성계수 및 감쇠비를 측정하여 제진효과를 조사하였다. 제진재료로서는 Foam, Latex, Rubber Powder 그리고 Plastic Resin 등을 사용하였으며 진동의 감쇠효과가 있는 것으로 나타났다. 실험방법으로는 KS F 2437 규정과 진동파의 속도법을 사용하였으며, 감쇠비 측정은 Frequency Response Spectrum 곡선에 대한 Polynomial Curvefitting방법과 기하학적 해석방법을 이용하여 각각의 결과를 비교.분석하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.180-185
• /
• 1996

Construction activities and operation of transportation facilities have caused unfavorable effects such as civil petitions associated with vibration-induced damages or nuisances. The objedtive of this research is to develop vibration-controlled concrete containing foams, latex, rubber powders, plastic resins and etc as a concrete mixture. As the first step to achieve this research, preliminary mix designs have been carried out to find out an appropriate mix proportion above 200kg/㎠ in uniaxial compressive strength, and investigate their dynamic mechanical characteristics such as dynamic elastic moduli, material damping ratio, Poisson's ratio, resonant frequency and etc.

• Geomechanics and Engineering
• /
• 제15권6호
• /
• pp.1227-1236
• /
• 2018

From all of the environmental problems, blast-induced vibrations often cause concern to surrounding residents. It is often claimed that damage to building superstructures is due to blasting, and sometimes the building owner files a lawsuit against the company that perform blasting operations. The blast-vibration problem has been thoroughly investigated in the past and continues to be the subject of ongoing research. In this study, a tunnel construction has been performed by a construction company, according to their contract they must have used drilling & blasting method for excavation in tunnel inlet and outlet portal. The population is very condensed with almost tunnel below in the vicinity houses of one or two floors, typically built with stone masonry and concrete. This situation forces the company to take extreme precautions when they are designing blasts so that the blast effects, which are mainly vibration and aerial waves, do not disturb their surrounding neighbors. For this purpose, the vibration measurement and analysis have been carried out and a new methodology in minimizing the blast induced ground vibrations at the target location, was also applied. Peak particle velocity and dominant frequencies were taken into consideration in analyzing the blast-induced ground vibration. The methodology aims to employ the most suitable time delays among blast-hole groupings to render destructive interference of surface waves at the target location.

• 한국소음진동공학회논문집
• /
• 제15권1호
• /
• pp.53-62
• /
• 2005

This study presents the NDE (non-destructive evaluation) technique for detecting the loosened bolts on joint steel structures on the basis of TOF (time of flight) and amplitudes of Lamb waves. Probabilistic neural network (PNN) technique which is an effective tool for pattern classification problem was applied to the damage estimation using PZT induced Lamb waves. Two kinds of damages were introduced by dominant damages (DD) which mean loosened bolts within the Lamb waves beam width and minor damages (MD) which mean loosened bolts out of the Lamb waves beam width. They were investigated for the establishment of the optimal decision boundaries which divide each damage class's region including the intact class. In this study, the applicability of the probabilistic neural networks was identified through the test results for the damage cases within and out of wave beam path. It has been found that the present methods are very efficient and reasonable in predicting the loosened bolts on the joint steel structures probabilistically.