• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.370-373
• /
• 2011

The subcommittee 3 (SC3) of Technical Committee 108 (TC 108) covers the calibration of mechanical vibration and shock measuring pickups and instruments. This paper introduces what KS codes are linked to the ISO standards developed by TC108 / SC3. It is shown that the KS codes do not fulfill the full set of ISO codes approved in the field of TC 108/SC3. Series of ISO standards established by the Working Group 6 (WG6) of SC3 are introduced. Main objectives of those WG 6 efforts are shown to replace the old versions of ISO 5347 series into new ISO 16063 series. Their features are briefly summarized in this paper. Finally, challenging technical issues underlying behind ISO TC108 / SC3 are addressed,, such as MEMS typed linear and angular vibration pickups.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.364-369
• /
• 2011

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.387-391
• /
• 2001

In evaluating sound performance of building, it is important to carry on tests and evaluations based upon residential sound performances. Korean Standards include test methods on sound performance, but don't include any code on evaluation methods. Therefore, evaluation methods from Japan or ISO have been used for evaluating sound performance in domestic so far. In this study, a draft of Korean Standards on a sound performance evaluation method in buildings is proposed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.392-396
• /
• 2001

Revision of KS, Korean Standards, is currently actively discussed. It is just the time for a new world class standards under the new system with WTO, World Trade Organization. This paper is a part of “Researchs on the Standards in the Building Acoustic Field”, as one of KS revision projects. The aim of this study is to define the requirements for measuring the reverberation time and other major room acoustical parameters.

• 한국군사과학기술학회지
• /
• 제24권3호
• /
• pp.302-308
• /
• 2021

Developers generally use test standards suggested by military standards such as MIL-STD-810G when performing vibration tests in the materiel development. However, according to MIL-STD-810G, it is recommended to test by tailoring the test standard suitable for the developed materiel, and it is specified to apply the suggested test standard only when there is difficulty in tailoring. In addition, the test standards presented by MIL-STD-810G are standards created under operating conditions different from the actual operating environment of each developed materiel, so the test according to this standard may be excessive or understated. Therefore, the developer must create an appropriate vibration test standard for the developed materiel as similar to the operating conditions as possible. In this paper, the procedure for creating the functional test standard and durability test standard suitable for the operating environment of the equipment to be mounted on the propeller aircraft under development is described, and the created standard is introduced.

• 대한의용생체공학회:의공학회지
• /
• 제43권3호
• /
• pp.147-152
• /
• 2022

This research is to measure real-time temperature distribution inside a tissue-mimicking phantom for the safety and effectiveness evaluations of focused ultrasound (FUS) device capable of linear scanning stimulation. Since the focusing area of the FUS stimulation device is smaller than diameter of conventional thermal probe and keeps moving, it is impossible to monitor temperature distribution inside the phantom. By using the phantom with a thin film temperature sensor array inserted, real-time temperature change caused by the FUS device was measured. The translation of the measured temperature peak was also tracked successfully. The present phantom had been experimentally proven to be applicable to validate the performance and safety of the therapeutic ultrasound devices.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1985년도 학술발표회 논문집
• /
• pp.95-100
• /
• 1985

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.707-710
• /
• 2001

With rapid industrial development, railway has become a main traffic means. But, the railway noise has caused much annoyance for the residents living nearby railway track. Therefore, it is necessary to establish the environmental quality standards for railway noise like the environmental quality standards for traffic noise. In this study, the domestic and foreign standards for railway noise were investigated with analysis of existing data and field survey of noise condition at near a railway.

• 한국광학회지
• /
• 제28권6호
• /
• pp.281-289
• /
• 2017

본 연구에서는 한국표준과학연구원(KRISS)에 설치된 대구경 반사경용 광학측정타워를 이용한 광학측정 시 타워에 유입되는 진동과 그로 인해 발생하는 광학측정오차에 대한 분석을 수행하였다. 여러 환경조건에 대해 타워구조물, 간섭계, Null lens의 진동측정을 수행하였으며 동시에 직경 600 mm의 축대칭 비구면 반사경의 광학측정을 수행하여 진동과 광학측정오차간의 연관성을 분석하였다. 진동측정 결과 타워의 상단에 위치한 Null lens 및 간섭계가 외부 진동요인에 매우 취약하여 외부 진동유입 시 광학측정오차가 민감하게 증가됨을 확인할 수 있었다. 특히 간섭계와 Null lens의 각 방향 진동이 서로 다르게 발생하는 경우 광학측정오차가 크게 증가하는 것으로 나타났다. 진동에 의한 간섭계, Null lens, 반사경의 정렬오차를 줄이기 위해 타워 구조 시스템이 저주파 진동에 둔감하도록 구조개선이 필요할 것으로 판단되며 진동 모니터링을 통해 간섭계와 Null lens의 진동이 안정화된 시점에 광학측정을 수행하여야 형상 오차 측정값에 대한 신뢰도를 높일 수 있는 것이라 사료된다.

• 한국철도학회논문집
• /
• 제16권4호
• /
• pp.246-252
• /
• 2013

철도차량은 차량조건, 선로조건 및 운행조건들에 의한 많은 진동원에 의해 매우 복잡한 형태의 진동과 충격이 발생한다. 진동과 충격은 철도차량에 부착되어 있는 부품 및 구성품을 고장시키는 원인이 된다. 이러한 진동 및 충격에 의한 장치의 고장을 줄이기 위해서는 개발단계에서부터 진동과 충격시험을 통해 장치가 진동과 충격에 견디는 지를 확인한 후에 철도차량에 장착하고 있다. 국내에는 서로 상이한 방법을 적용한 여러 가지의 철도차량 진동 및 충격시험 규격이 사용되고 있다. 본 논문에서는 국내에서 대표적으로 사용되는 규격인 IEC 61373과 KS R 9144, KS R 9146에 대해 상대적 비교를 통해 진동과 충격시험의 방법에 대한 차이점을 고찰함으로써 진동시험 관련자들이 정확한 진동 및 충격시험을 할 수 있도록 하고자 한다.