• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.88-92
• /
• 2004

Mufflers have been important elements in engineering practice, which reduce various kinds of noises because of its general capability of application. Many kinds of methods :Ire applied to analyze their characteristics and to expect their performances. Some of the methods, conventionally, are based on the plane wave assumption for its simplicity. The shortcoming of this approach is its limitation of analysis ranges and parameters related with analysis and response. This research employs the boundary element method f3r the analysis of mufflers, which considers 3 dimensional scattering effects. This method can be used more appropriately fur tile analysis of mufflers because its analysis ability for higher frequency range which can be decided by the element size of the model. And, experimental analysis using a reciprocity theorem is conducted to verify the analysis results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1648-1653
• /
• 2000

Theoretical analysis of noise reduction by a membrane-duct system is presented. When acoustic waves propagate in the membrane-duct, the part of membrane is also excited and its motion is coupled with interior medium. For an infinite plane membrane-duct system, a simple coupled governing equation is derived and solved. One of the characteristics of dispersion relation is that evanescent waves occur below critical frequency. Attaching damping materials to the membrane may improve the absorption efficiency of acoustic energy. The results show that the membrane-duct system can be applied to diminish and absorb low frequency noise in duct instead of passive muffler, such as simple expansion chamber or absorption material.

• 한국소음진동공학회논문집
• /
• 제17권3호
• /
• pp.249-256
• /
• 2007

Aircraft noise is a serious problem to inhabitants near airports. INM is one of programs for determining the predicted noise impact in the vicinity of airports. It has been widely used for engineers to evaluate aircraft noise. However it is difficult to predict aircraft noise in case of lack of exact INM input data. The exact informations about a fighter plane are not known well for a security problem. This study presents methods of reducing errors between measurement and simulation when the exact INM input data is not known. Especially we adjusted the thrust force of aircraft engine and reduced the error.

• 소음진동
• /
• 제9권6호
• /
• pp.1123-1130
• /
• 1999

A system which is composed of a membrane and an air cavity is studied. To analyze the low frequency characteristics of a single membrane-cavity system, a plane wave model is derived. The relations among system variables, such as tension, density and stiffness, are investigated. Absorption coefficient has a maximum value at a peak frequency. In addition, a membrane-cavity system absorbs the low frequency noise with a band around peak frequency. This band is primarily determined by damping effect of the system. Furthermore, a multiple membrane-cavity system is investigated by using the transfer matrix method. To show the practical applicability of the proposed model, extensive experiments were conducted. Results show that a multiple membrane-cavity system can have broader noise reduction in the low frequency range than single.

• 플랜트 저널
• /
• 제4권3호
• /
• pp.54-59
• /
• 2008

The resonance of boiler is caused by exciting force in the gas path and it generates the vibration by the harmony of boiler's dimensional factor. According to trending toward the boiler of increasing capacity and a bigger size, it has a problem of the vibration at back-pass heating surfaces. We can predict such vibrations as comparison between vortex frequency and gas column's natural frequency. We can't rely on the method for the past decades because of changing parameters, such as an allowable error, gas temperature, gas velocity, Strouhal number. We can reduce the vibration to use the seasoning effect and change the operating condition in coal fired boiler but it's not essential solution. When the vibration occurred in the model boiler, we must measures the acoustic pressure and frequency of places for considering the means. So far, we confirmed the problem from field measures and theoretical analysis about the acoustic vibration of boiler. We installed anti-acoustic baffle in a existing boiler to change the acoustic natural frequency at the cavity, which results in reducing the acoustic vibration. The first, we prove that the acoustic resonance is caused by harmonizing vortex shedding frequency of tube heat surface with acoustic natural frequency of cavity in the range of 650~750 MW loads. The second, the acoustic resonance at the back-pass heating surface has the third order of acoustic natural frequency at the second economizer. We install five anti-acoustic baffles at the second economizer to reducing the resonance. We confirm considerably reducing the acoustic vibration of boiler during the commercial boiler.

• 지구물리
• /
• 제3권4호
• /
• pp.269-280
• /
• 2000

도심지역 철도 주변에서 열차의 주행으로 인해 발생되는 철도 진동이 심각한 공해진동으로 부각되고 있다. 이러한 철도진동으로 부터의 피해를 저감시킬 수 있는 방안을 탐색해 보고자, 대전 도심 지역을 통과하는 철도 주변에서의 철도 진동 실태를 조사하였다. 열차가 통과하는 주행 방향과 수직한 지표면을 따라 5m 간격으로 55m까지 일정한 거리 상에서 1초 간격으로 Z축 진동값을 측정하였다. 측정 조사된 총 353개의 자료 셀마다 $L_{10}$ 값을 산출하여 진동측정치와의 거리, 열차의 속력, 차량수와의 상관 관계를 분석하였다. 분석결과 지반을 전파하는 철도진동은 철도중심에서 대략 25m 이내의 지역에서는 소음 진동규제법에서 제시한 허용기준 60dB이상으로 나타났으며, 속력 변화에 대한 진동 값의 변화가 작아 모든 속력의 열차에 대해 공해진동이 존재하였다. 한편 철도 주변 공구 밖에서는 공구가 없는 경우보다 진동값이 대체로 10%정도 감소하여 철도진동 저감에 공구 설치가 효과적인 것으로 판단된다. 실제의 지반을 대상으로 방진구를 설치하고 일정 높이에서 철구를 떨어뜨려 진동전달실험을 실시한 결과에서도 진동원으로부터 일정한 거리를 확보하면 공해진동으로부터 벗어날 수 있었으며, 공구를 설치할 경우 공구의 깊이, 위치 등의 변화에 따라 진동 저감 효과가 크게 나타났다. 대전도심지역 철도진동 실태분석 및 실험 연구결과를 종합해 볼 때 거리감쇠효과를 적용하거나 공구를 설치함으로써 철도진동으로 인한 피해를 상당히 저감시킬 수 있는 것으로 밝혀졌다. 따라서 철도에 근접한 많은 주택 및 주민의 진동 피해를 저감시키기 위하여 도심지역에서 철도와 나란하게 공구를 설치하고 이를 효율적으로 이용하는 방안이 적극 검토되어야 할 것으로 판단된다.

• 플랜트 저널
• /
• 제4권4호
• /
• pp.56-61
• /
• 2008

The phenomena of oil whip in steam turbines take place for the unbalance force between a rotor shaft and bearing oil film. The several parameters that affect onset of oil whip have been well known. However, the major parameter of oil whip is shaft mis-alinement. A oil whip causes the high vibration and the shutdown of rotor system. We mostly stop the steam turbine to adjust a shaft re-alinement concerning oil whip. In this case, it needs many costs for maintenance and long shutdown times. In this study, we study and observe the oil whip of the 300MW steam turbine in many years and we conduct the field test for another steam turbine for reducing vibration from oil whip. The results of this study are that a oil whip takes place with a particular rotating speed or a particular turbine output and the oil temperature change is a very effective method for on-line oil whip treatment.

• Wind and Structures
• /
• 제26권5호
• /
• pp.317-329
• /
• 2018

Wake characteristics of the flow over a finite square prism at different incidence angles were experimentally investigated using an open-loop wind tunnel. A finite square prism with a width D = 15 mm and a height H = 7D was vertically mounted on a horizontal flat plate. The Reynolds number was varied from $6.5{\times}10^3$ to $28.5{\times}10^3$ and the incidence angle ${\alpha}$ was changed from $0^{\circ}$ to $45^{\circ}$. The ratio of boundary layer thickness to the prism height was about ${\delta}/H=7%$. The time-averaged velocity, turbulence intensity and the vortex shedding frequency were obtained through a single-component hotwire probe. Power spectrum of the streamwise velocity fluctuations revealed that the tip and base vortices shed at the same frequency as that ofspanwise vortices. Furthermore, the results showed that the critical incidence angle corresponding to the maximum Strouhal number and minimum wake width occurs at ${\alpha}_{cr}=15^{\circ}$ which is equal to that reported for an infinite prism. There is a reduction in the size of the wake region along the height of the prism when moving away from the ground plane towards the free end.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1687-1692
• /
• 2000

In this paper, experimental methods to find acoustic characteristics of acoustically treated air-conditioning duct system are proposed. Existing methods to analyze acoustic properties of duct with absorbent material have a dilemma which has to assume the wave in duct to be a plane wave. Under this assumption, applicable frequency limitation makes accurate analysis of practical air-conditioning system impossible. In order to analyze the properties of in-lined treated absorbent with high degree of accuracy, in this experiments the range of exciting frequency of sound source is broadband, which means that source speaker excites higher mode of in-duct sound field. Also, to define the relations of air cavity to the acoustic characteristics, acoustic experiments on ducts with air cavity of different depth are operated. In conclusion, air-cavity makes the absorbing ability of duct improved in low frequency range. Due to the interactions between the air cavity depth and the depth of absorbents, according to depth of cavity, the magnitude of absorption coefficients vs frequencies in specific range is changed. In lower frequency range, the absorption of sound energy by air cavity is more dominant than by absorbent itself, in higher range, the inversion is true.

• 한국소음진동공학회논문집
• /
• 제24권12호
• /
• pp.969-976
• /
• 2014

Nowadays, it is required for naval ships to estimate 3D underwater radiated noise pattern in all direction at peak frequencies of hull vibration for the reduction of being detected and doing the effective operation. For this purpose, the numerical method has to be developed to calculate 3D underwater radiated noise pattern with experimental data. It is very difficult to obtain the experimental data for the real ship. Alternative to get the experimental results is to use NAH(near-field acoustic holography) in acoustic tank with experimental model. Application of NAH in acoustic tank for the experimental model needs some investigation of reflection wave from the wall of the acoustic tank and unmeasured zone of the experimental model due to the supporting structure for it. In this study, the effect of reflection wave in the acoustic tank and unmeasured area of the experimental model when using the NAH was investigated with experiment and numerical model. From these, it is known for the error due to reflection wave can be reduced when the distance between the measurement plane and source is being shorten. Also, unmeasured area of the experimental model gives rise to some error in the estimation of the far-field acoustic pressure.