• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.103-109
• /
• 2007

With the increase of track density, high rotational speed and the compatibility for various media in optical disk drives, the effective design to vibration reduction is very important for robust operation. Especially when a slim optical disk drive for a notebook PC is excited by a mass-unbalanced disk, internal vibration and its transmission to external case bring about severer problem than that of conventional one. In this paper a design process of a rubber mount in a slim optical disk drive for vibration reduction is presented. The characteristics of rubbery materials - hyper-elastic and visco-elastic - are measured with standard specimens. The static stiffness of a rubber mount was calculated by FEM and the dynamic stiffness is predicted with the static stiffness and the impedance test data of the standard specimen. The transmissibility tests are performed for the purpose of verification of the design process.

• 한국소음진동공학회논문집
• /
• 제24권5호
• /
• pp.407-413
• /
• 2014

The diesel engine and reduction gear combination is one of the common propulsion system in a naval vessel. Since the diesel engine has torsional vibration caused by reciprocating motion of the mass and gas pressure force of the cylinder, high cycle torsional fatigue can be occurred. Therefore, ROK navy restricts the maximum stress of the propulsion shaft according to MIL G 17859D. In this paper, the root cause for the failure of the diesel engine and reduction gear connecting shaft occurred in typical naval vessel is investigated based on the measured bending and torsional moment according to MIL G 17859D procedure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.381-386
• /
• 2002

This paper presents a piezoelectric shunt methodology to reduce unwanted vibration of optical disk drive(O.D.D.). After briefly investigating a second-order mechanical vibration absorber model, the O.D.D. structure is incorporated with the piezoelectric shunt circuit. In order to evaluate feasibility of multi-mode passive damping of the structure, admittance measurement of piezoceramic is undertaken. The parameters are optimally tuned by admittance measurement results on the basis of the circuit model and displacement transmissibility is evaluated. To verify validity of admittance measurement result, experiment is performed and vibration reduction is achieved at two different modes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.561-566
• /
• 2003

In this paper, a numerical method for evaluating the efficiency of vibration reduction of substructure under floating slab track is developed for optimal design of floating slab track. The equation of motion for train and track interaction system is derived by applying compatibility condition at the contact points between wheels and rails. The train is modelled by 3-masses system and the track by continuous support beam system. Numerical analyses are carried out to investigate the effects of train speed, stiffness and damping of slab-pad, and track irregularity upon vibration reduction in substructure under the track.

• 한국항공우주학회지
• /
• 제41권12호
• /
• pp.987-993
• /
• 2013

한국형기동헬기(KUH)는 국내 최초로 개발된 헬기로서, 2010년 3월 초도 비행을 시작으로 2012년 6월 체계 개발을 성공적으로 종료하였다. 비행시험 단계에서 다양한 진동문제가 발생하였으며 이를 제어하기 위해 적절한 진동저감장치를 설계하고 적용하였다. 한국형 기동헬기의 주요 진동 성분인 $4{\Omega}$ 주파수 진동 저감을 위해 주로터 블레이드, 주기어박스 지지부, 조종실, 승객실 그리고 조종좌석에 진동저감장치를 적용하였다. 또한, 테일-쉐이크 진동 제어를 위해 돔페어링을 적용하였다. 본 논문에서는 한국형 기동헬기에 적용된 진동저감장치들의 해석 및 설계 기법과 비행시험 결과를 제시한다.

• Structural Engineering and Mechanics
• /
• 제43권5호
• /
• pp.607-621
• /
• 2012

The Expo Culture Centre is one of the permanent buildings at the World Expo 2010 in Shanghai, China. The main structure has an oval shape and consists of 36 radial cantilever steel trusses with different lengths and inner frames made of concrete-filled rectangular steel tube members. Tuned mass dampers are used to reduce the excessive vibrations of the sixth floor that are caused by human-induced resonance. A three-dimensional analytical model of the system is developed, and its main characteristics are established. A series of field tests are performed on the structure, and the test results show that the vertical vibration frequencies of most structural cantilevers are between 2.5 Hz and 3.5 Hz, which falls in the range of human-induced vibration. Twelve pairs of tuned mass dampers weighing 115 tons total were installed in the structure to suppress the vibration response of the system. These mass dampers were tuned to the vertical vibration frequency of the structure, which had the highest possibility of excitation. Test data obtained after the installation of the tuned mass dampers are used to evaluate their effectiveness for the reduction of the vibration acceleration. An analytical model of the structure is calibrated according to the measured dynamic characteristics. An analysis of the modified model is performed and the results show that when people walk normally, the structural vibration was low and the tuned mass dampers have no effect, but when people run at the structural vibration frequency, the tuned mass dampers can reduce the floor vibration acceleration by approximately 15%.

• 한국철도학회논문집
• /
• 제12권5호
• /
• pp.631-640
• /
• 2009

본 논문에서는 수치해석적인 기법을 이용하여 지하철 주변 지반의 진동레벨 감쇠에 대한 연구를 수행하였다. 해석 결과 터널이 토사지반에 있을 경우 지반진동에 가장 큰 영향을 미치는 요소는 지반의 물성치로 나타났고, 암반에 있을 경우 가장 큰 영향을 미치는 것은 암반의 물성치로 나타났다. 또한, 진동원과의 연직면에서 떨어져 있는 각도를 기준으로 영향범위를 산정한 결과, 대부분의 해석 결과에서 연직면에서 $30^{\circ}$ 이내에 있을 경우 진동레벨의 감쇠 현상은 크지 않은 것으로 판단되었고, $40^{\circ}$ 이상이 되면 진동레벨은 급격히 감소하는 경향이 있는 것으로 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.307-312
• /
• 1996

A torsional vibration analysis of a multi-stage reduction gear box connected to a gas turbine system is presented. For a free vibration analysis the Modified Hibner Branch Method, so called "Blank Matrix Method", and the .lambda.-Matrix Method are used in the modeling and the eigenvalue solution, respectively. Also, a short circuit forced analysis of the system is performed, utilizing the energy method modeling. It is shown that the results of the free vibration analysis have the same tendency as those of the short circuit analysis. analysis.

• 한국철도학회논문집
• /
• 제16권1호
• /
• pp.26-31
• /
• 2013

감속구동장치는 모터에 회전력을 차륜에 전달하는 중요한 장치로써 가장 큰 고장원인 중 하나는 기어의 접촉 피로손상에 의한 것이다. 이로 인해 주행 시 심각한 영향을 미칠 수 있기 때문에 주행안전성 확보를 위한 이상진단 모니터링시스템 기술이 요구되고 있으며, 이상진단을 위한 모니터링 시스템 개발을 위해 고장이 없는 감속구동장치의 기초 데이터 분석이 중요하다. 기어의 주요 이상진단방법 중 고장원인파악 및 조기진단에 주로 사용되는 진동신호분석법을 적용하여, 본 논문에서는 고장이 없는 고속철도차량(KTX, KTX II) 감속구동장치를 대상으로 실물시험과 실차시험을 수행함으로써 고장이 없는 감속구동장치의 이상진단에 필요한 진동특성분석을 실시하였다.

• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.925-931
• /
• 2012

The air-conditioner for railway vehicle should have vibration durability in order to operate normally in vehicle running situation. KS R 9144(vibration test methods for railway vehicle parts) is used to verify the vibration durability. The specifications of compressor, condenser and evaporator for air-conditioner in railway vehicle are standardized, but the shape and structure of pipe lines are not specified. Because the air-conditioner handler produces the pipe line arbitrarily, sometimes the pipe line is broken during the vibration durability test. In this research the cause identification and solution of pipe line breaking problem in during the vibration durability test were studied for air-conditioner of railway vehicle(diesel multiple unit). It was found that the natural frequency of pipe line is related to the pipe line breaking by experiment. A new pipe line shape was introduced by using FEA in order to avoid the resonance. The prototype new pipe line was applied to air-conditioner and the natural frequency was measured by experiment in order to verify the resonance avoidance. The vibration reduction of air-conditioner with new pipe line was reviewed by comparing to the air-conditioner with original one.