• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.255-260
• /
• 2016

In this paper, a full-wave rectifier (FWR) with a simple vibration detector suitable for use with vibrational energy harvesting systems is presented. Conventional active FWRs where active diodes are used to reduce the diode voltage drop and increase the system efficiency are usually powered from the output. Output-powered FWRs exhibit relatively high efficiencies because the comparators used in active diodes are powered from the stable output voltage. Nevertheless, a major drawback is that these FWRs consume power from the output storage capacitor even when the system is not harvesting any energy. To overcome the problem, a technique using a simple vibration detector consisting of a peak detector and a level converter is proposed. The vibration detector detects whether vibrational energy exists or not in the input terminal and disables the comparators when there is no vibrational energy. The proposed FWR with the vibration detector is designed using a $0.35-{\mu}m$ CMOS process. Simulation results have verified the effectiveness of the proposed scheme. By using the proposed vibration detector, a decrease in leakage current by approximately 67,000 times can be achieved after the vibration disappears.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.421-424
• /
• 2017

본 논문에서는 진동 감지기가 있는 전파 정류 하베스팅 회로를 설계하였다. 설계된 회로는 진동 감지기와 능동다이오드를 통해 진동이 감지될 때에만 동작하며, 진동이 없을 때 비교기를 off시켜 $C_{STO}$에 저장된 에너지의 누설을 방지한다. 커패시터에 저장된 에너지는 레벨 변환기와 능동다이오드의 구동에 사용된다. 진동 감지기는 Hysteresis 기능이 있는 Schmitt Trigger와 피크검출기로 구현하였다. 제안된 회로는 $0.35{\mu}m$ CMOS 공정으로 설계하였으며, 모의실험을 통해 동작을 검증하였다. 설계된 에너지 하베스팅 회로의 칩 면적은 $590{\mu}m{\times}583{\mu}m$이다.

• 한국소음진동공학회논문집
• /
• 제24권12호
• /
• pp.927-934
• /
• 2014

In this paper, analysis of the vibration characteristic for the mine detectable test platform is described. The test platform system is the multi-sensor mine detectable vehicle. This multi-sensor mine detectable unit is more efficient detection performance than other conventional methods. The test platform system has five subsystems, the UWB(ultra wide band) sensor scanner, the MD(metal detector) sensor scanner, the ND(neutron detector) sensor scanner, and the detectable vehicle. We perform the vibration tests for the test platform and analyze the vibration characteristic, such as the max displacement, the max deformation and the max Von-Misses stress.

• 한국산학기술학회논문지
• /
• 제22권5호
• /
• pp.98-107
• /
• 2021

차기군수지원함(AOE-II) 풍향풍속계 장비에 대해서 항해시운전평가 결과, 함의 우현에서는 40~90도 부근, 좌현에서는 270~320도 부근에서 풍향풍속 검출기 움직임 오작동 현상이 발생되었다. 위의 현상에 대한 원인을 분석하고 개선하는 것이 본 연구의 목적이었다. 원인 추정으로 풍향풍속 검출기가 마스트 구조물에 가려져서 불어오는 바람의 직접적인 영향을 받지 않게 되고, 마스트 구조물 뒤쪽으로 와류 기류가 형성되어 움직임 오작동 현상을 발생시켰다고 추정하였다. 위의 문제를 해결하기 위해서 신규 설치되는 마스트 야드에 풍향풍속 검출기를 이동 설치하는 방안을 검토하였다. 진동 해석을 실시하여 진동 영향성을 검토 후 신규 마스트 야드에 풍향풍속 검출기를 설치하여 항해시운전평가로 검증하였다. 개선 방안이 일부 유효하여, 신규 마스트 야드에서 풍향풍속 검출기 위치를 마스트와 이격하여 이동 설치 후 항해시운전평가로 다시 검증하였다. 풍향풍속 검출기 움직임 오작동 현상이 더 이상 발생하지 않아서 적절한 개선방안으로 확인되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.700-703
• /
• 2003

The test method of ASTM E 756 and KS D 0076 to estimate vibration-damping properties is compared. Comparison method depending on specimen support, exciting method and calculation method for loss factor is used. Half-power bandwidth method and vibration decay method is used in the calculation method for loss factor, and Young's modulus is decided by geometric character and density for specimen and resonance frequency. Vibration measurement sensor is compared by using non-contact displacement detector, velocity detector and accelerometer. This paper is also presented the matter which is able to cause error in the measurement

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.439-442
• /
• 2003

The test method of ASTM E 756 and JIS G 0602 to estimate vibration-damping properties is presented. Measurement method depending on specimen support, exciting method and calculation method for loss factor is used. Half-power bandwidth method and vibration decay method is used in the calculation method for loss factor, and Young's modulus is decided by geometric character and density for specimen and resonance frequency. Vibration measurement sensor is compared by using non-contact displacement detector, velocity detector and accelerometer. The cause of measurement error is also presented.

• 한국소음진동공학회논문집
• /
• 제16권12호
• /
• pp.1208-1214
• /
• 2006

ATM(automated-teller machine) is a machine that receives and pays money directly. The double bill detector(DBD) module of an ATM detects double bills from its thickness. In this paper, the dynamic behavior of the DBD was analyzed, which cannot be simulated correctly by a package program of SAMCEF. And the displacements of the lever was measured for various bills experimentally. The measured dynamic behaviors were analyzed kinematically using a vector equation and simulated dynamically by the derivation of equation of motion with consideration of damping and stiffness of the DBD and bills. The analysis showed that the spring constant of the system is not so influential, instead, the contact angle between the lever and bill needs to be larger than the existing DBD in order to be laster and reliable DBD.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.798-801
• /
• 2001

we have investigated a characteristic of a vibration displacement detector, which was made with a photocoupler. Output signals of the detector were dominant at 700Hz of the frequency of vibrator, and It was maximum, when the amplitude of input signal had been at 1.1V. The detector will be used in measuring the surface roughness of substrates.

• 천문학회보
• /
• 제37권2호
• /
• pp.209.2-209.2
• /
• 2012

UFFO Burst Alert & Trigger telescope (UBAT) is one of major instruments of UFFO-Pathfinder. The UBAT aims at 10 arcmin resolution localization of Gamma Ray Bursts with X-ray coded mask technique. It has $400mm{\times}400mm$ coded mask aperture, hopper, shielding and detector module with effective area of $191cm^2$. The detector module consists of an assembly of 36 64-ch MAPMTs and $25mm{\times}25mm$ pixellated YSO crystal array, and associated analog and digital electronics of about 2500 channels. We performed a vibration test using a dummy MAPMT with the detector module structure to measure the indused stress applied onto the MAPMT. We designed a sub-structure on the detector module to avoid the resonance that would otherwise deforms the detector module structure. A finite element analysis confirms the reduction of the load acceleration down to 12g. The experimental results are to be reported. Consequently, it proves that the MAPMT arrays of the flight UBAT detector module structure would survive in the space launch environment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.788-789
• /
• 2012