• Tribology and Lubricants
• /
• v.32 no.2
• /
• pp.61-66
• /
• 2016

Total thickness variation (TTV), BOW, and surface roughness are essential characteristics for high quality sapphire substrates. Many researchers have attempted to increase removal rate by controlling the key process parameters like pressure and velocity owing to the high cost of consumables in sapphire chemical mechanical polishing (CMP). In case of the pressure approach, increased pressure owing to higher deviation of pressure over the wafer leads to significant degradation of the TTV. In this study, the authors focused on reducing TTV under the high-pressure conditions. When the production equipment polishes multiple wafers attached on a carrier, higher loads seem to be concentrated around the leading edge of the head; this occurs because of frictional force generated by the combination of table rotation and the height of the gimbal of the polishing head. We believe the skewed pressure distribution during polishing to be the main reason of within-wafer non-uniformity (WIWNU). The insertion of a hub ring between the polishing head and substrate carrier helped reduce the pressure deviation. Adjusting the location of the hub ring enables tuning of the pressure distribution. The results indicated that the position of the hub ring strongly affected the removal profile, which confirmed that the position of the hub ring changes the pressure distribution. Furthermore, we analyzed the deformation of the head via finite element method (FEM) to verify the pressure non-uniformity over the contact area Based on experiment and FEM results, we determined the optimal position of hub ring for achieving uniform polishing of the substrate.

• Journal of Nutrition and Health
• /
• v.37 no.4
• /
• pp.266-272
• /
• 2004

This study investigated the effects of soyoligosaccharide consumption on lipid profile of plasma, liver and feces and immune responses in Sprague-Dawley male rats. Sixty male Sprague-Dawley rats 4-wk-old were provided the soyo-ligosaccharide containing diets for 4 weeks (0, 100 g/kg diet); each of these diets was supplemented with either 70 or 200 g fat/kg diet, giving a total of 4 experimental groups. The effect of weight reduction was most significantly observed in the group fed low fat and soyoligosacchairde diet. The plasma total lipid and cholesterol contents were not changed by either fat proportion or soyoligosaccharide supplementation in the diets. Also the plasma triglyceride lowering effect by soyoligosaccharide was not observed in rats fed either low fat or high fat diet. However, the significant decrease in TG contents was found with rats fed high fat diets compared to the control/no soyoligosaccharide diet. Elevation of plasma LDL-cholesterol and reduction of HDL-cholesterol by feeding high fat diet was not altered by supplementing soyoligosaccharide. This was also applied to the liver lipid profiles. The significant increases in liver total lipid, trigly-cerides and cholesterol by high fat diet was not abolished by feeding soyoligosaccharide. However, the desirable effects of feeding soyoligosaccharide were found with total lipid and cholesterol excretion through feces in rats fed high fat diets. Immune organ weights and spleen cell proliferations did not affected by experimental diets. These results de-monstrated that soyoligosaccharide intakes increased the lipid output via feces, especially in rats fed the high fat diet, but more researches are needed on immune responses.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.259-265
• /
• 2001

Staphylococal infection still remains to be one of the most serious infections, having various complications in the clinical use of indwelling polymeric medical devices. However, there are a few promising systems showing a high antibacterial effect without causing any demage of polymer backbone under biological environments such as blood or body fluid. In order to resolve this problem, we have designed a new antibiotic releasing system via a hydrolysis mechanism. The surface of biomedical polyurethane (PU) was modified by using 1,6-diisocyanatohexane (HMDI) to immobilize the rifampicon. Also, the immobilized rifampicin was designed to be released by a selective cleavage of the unstable carbamate linkage that exists on the rifampicin-immobilized polyurethane (PHR). The immobilization of rifampicin on the surface of polyurethane was confirmed by the disappearance of the characteristics IR absorbance peak of the isocyanate (-NCO) group at $2,267\;cm^{-1}$. The PHR showed a continuous rifampicin release profile under an aqueous environment of 10 mM of PBS (phosphate-buffered saline) for ove 6 days. The rifampicin molecules, which are released from PHR under an optimal bacterial infection environment, had a higher antibacterial activity against both S. aureus and S. epidermidis than rifampicin-incorporated polyurethane (RIP). In addition, the PHR maintained a stable antibacterial effect under a blood-mimic aqueous environment such as bovine calf serum.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.12
• /
• pp.7501-7508
• /
• 2013

Background: Chronic myeloid leukemia (CML) is a myeloproliferative disorder of hematopoietic stem cell scarrying the Philadelphia (Ph) chromosome and an oncogenic BCR-ABL1 fusion gene. The tyrosine kinase inhibitor (TKI) of BCR-ABL1 kinase is a treatment of choice for control of CML. Objective: Recent studies have demonstrated that miRNAs within exosomes from cancer cells play crucial roles in initiation and progression. This study was performed to assess miRNAs within exosomes of K562 cells. Methods: miRNA microarray analysis of K562 cells and K562 cell-derived exosomes was conducted with the 6th generation miRCURYTM LNA Array (v.16.0). Gene ontology and Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses were also carried out. GO terms and signaling pathways were categorized into 66 classes (including homophilic cell adhesion, negative regulation of apoptotic process, cell adhesion) and 26 signaling pathways (such as Wnt). Results: In exosomes, 49 miRNAs were up regulated as compared to K562 cells, and two of them were further confirmed by quantitative real-time PCR. There are differentially expressed miRNAs between K562 cell derived-exosomes and K562 cells. Conclusion: Selectively expressed miRNAs in exosomes may promote the development of CML via effects on interactions (e.g. adhesion) of CML cells with their microenvironment.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.6
• /
• pp.870-879
• /
• 2006

The present study describes the formation of succinic acid by a nonvirulent, highly osmotolerant Klebsiella pneumoniae strain SAP (succinic acid producer), its profile of metabolites, and enzymes of the succinate production pathway. The strain produced succinate along with other metabolites such as lactate, acetate, and ethanol under aerobic as well as anaerobic growth conditions. The yield of succinate was higher in the presence of $MgCO_3$ under $N_2$ atmosphere as compared with that under $CO_2$ atmosphere. Analysis of intracellular metabolites showed the presence of a smaller PEP pool than that of pyruvate. Oxaloacetate, citrate, and $\alpha$-ketoglutarate pools were considerably larger than those of isocitrate and fumarate. In order to understand the synthesis of succinate, the enzymes involved in end-product formation were studied. Levels of phosphoenolpyruvate carboxykinase, fumarate reductase, pyruvate kinase, and acetate kinase were higher under anaerobic growth conditions. Based on the profiles of the metabolites and enzymes, it was concluded that the synthesis of succinate took place via oxaloacetate, malate, and fumarate in the strain under anaerobic growth conditions. The strain SAP showed potential for the bioconversion of fumarate to succinate under $N_2$ atmosphere in the presence of $MgCO_3$. At an initial fumarate concentration of 10 g/l, 7.1 g/l fumarate was converted to 7 g/l succinate with a molar conversion efficiency of 97.3%. The conversion efficiency and succinate yield were increased in the presence of glucose. Cells grown on fumarate contained an 18-fold higher fumarate reductase activity as compared with the activity obtained when grown on glucose.

• Journal of Oral Medicine and Pain
• /
• v.40 no.4
• /
• pp.155-162
• /
• 2015

Purpose: The association between pain and sleep is described as a vicious cycle and psychological distress is well known as comorbid condition in the patients with pain and sleep problems. The aim of the study was to evaluate the prevalence of self-reported sleep disturbance and its relationship to clinical and psychological profiles in temporomandibular disorder (TMD) patients. Methods: The sample consisted of 123 TMD patients (90 women and 33 men), with a mean age of $39.9{\pm}15.4years$. Self-report measures of sleep quality, pain and psychological profile were conducted via the Pittsburgh Sleep Quality Index (PSQI), the Brief Pain Inventory and the Symptom Checklist-90-Revision at the initial visit. The primary diagnosis of TMD were categorized as TMD with internal derangement without pain, TMD with joint pain, TMD with muscle pain and TMD with joint-muscle combined pain. The chi-square test, independent t-test, oneway ANOVA and multiple linear regression analysis were used for statistics. Results: The patients was grouped as good sleepers (n=32, scores of 5 and lower) and poor sleepers (n=91, scores of 6 and higher) according to the recommended cutoff point of the global PSQI score (>5). TMD patients with pain showed poor sleep quality than TMD patients with internal derangement without pain. Poor sleepers had high pain interference and elevated psychological distress. Among them, pain interference and depression were significant predictors to sleep quality. Conclusions: The results suggest that sleep disturbance is a prevalent complaint in TMD patients, and sleep problems in TMD patients are associated with pain and psychological distress.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.839-844
• /
• 2014

The gas-phase radical-radical reaction $O(^3P)$ + $C_2H_5$ (ethyl) ${\rightarrow}$ $H(^2S)$ + $CH_3CHO$(acetaldehyde) was investigated by applying a combination of vacuum-ultraviolet laser-induced fluorescence spectroscopy in a crossed beam configuration and ab initio calculations. The two radical reactants $O(^3P)$ and $C_2H_5$ were respectively produced by photolysis of $NO_2$ and supersonic flash pyrolysis of the synthesized precursor azoethane. Doppler profile analysis of the nascent H-atom products in the Lyman-${\alpha}$ region revealed that the average translational energy of the products and the average fraction of the total available energy released as translational energy were $5.01{\pm}0.72kcalmol^{-1}$ and 6.1%, respectively. The empirical data combined with CBS-QB3 level ab initio theory and statistical calculations demonstrated that the title exchange reaction is a major channel and proceeds via an addition-elimination mechanism through the formation of a short-lived, dynamical addition complex on the doublet potential energy surface. On the basis of systematic comparison with several exchange reactions of hydrocarbon radicals, the observed small kinetic energy release can be explained in terms of the loose transition state with a product-like geometry and a small reverse activation barrier along the reaction coordinate.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.94-103
• /
• 2020

This study investigated the effects of ultrasonic nanocrystal surface modification (UNSM) on the deteriorated surface of AISI SUS316L additively manufactured (AM) using the powder bed fusion (PBF) technique. Specifically, the effects of UNSM conditions on surface topology, hardness, and anti-corrosion were examined. Before UNSM treatment, the stainless steel 316L powder was processed via the PBF machine to prepare a substrate. We observed surface changes due to UNSM treatments in PBF SUS316L substrates and examined the correlation between topology changes, roughness, hardness, and anti-corrosion. After UNSM treatment, the coarse as-built surface was refined, and a regular micro-profile was implemented. Compared to the non-treated PBF sample, the waviness and roughness of the surfaces after UNSM treatment decreased by up to 56.0% and 94.5%, respectively, and decreased further as the interval decreased. The hardness improved by up to 63.0% at a maximum depth of 500 ㎛ from top surface by the UNSM treatment. The results of the corrosion test showed that the corrosion resistance of the UNSM specimens was moderately improved compared to that of the untreated surface. This study confirmed that UNSM is an effective post-processing technique for additively manufactured parts.

• Toxicological Research
• /
• v.28 no.1
• /
• pp.57-65
• /
• 2012

In this study, the 4-week oral toxicity and anti-cancer activity of the hexane layer of Melia azedarach L. var. japonica Makino's bark extract were investigated. We carried out a hollow fiber (HF) assay and 28-day repeated toxicity study to confirm the anti-cancer effect and safety of the hexane layer. The HF assay was carried out using an A549 human adenocarcinoma cell via intraperitoneal (IP) site with or without cisplatin. In the result, the 200 mg/kg b.w of hexane layer with 4 mg/kg b.w of cisplatin treated group, showed the highest cytotoxicity aginst A549 carcinoma cells. For the 28-day repeated toxicity study, 6 groups of 10 male and female mice were given by gavage 200, 100, or 50 mg/kg b.w hexane layer with or without 4 mg/kg b.w of cisplatin against body weight, and were then sacrificed for blood and tissue sampling. The subacute oral toxicity study in mice with doses of 200, 100, and 50 mg/kg b.w hexane layer showed no significant changes in body weight gain and general behavior. The cisplatin-treated group significantly decreased in body weight compared to the control group but regained weight with 100 and 200 mg/kg b.w of hexane layer. The biochemical analysis showed significant increase in several parameters (ALT, total billirubin, AST, creatinine, and BUN) in cisplatin-treated groups. However, in the group given a co-treatment of hexane layer (200 mg/kg b.w), levels of these parameters decreased. In hematological analysis, cisplatin induced the reduction of WBCs and neutrophils but co-treatment with hexane layer (100 and 200 mg/kg b.w) improved these toxicities caused by cisplatin. The histological profile of the livers showed eosinophilic cell foci in central vein and portal triad in cisplatin treated mice. These results show that hexane layer might have an anti-cancer activity and could improve the toxicity of cisplatin.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.1
• /
• pp.71-81
• /
• 2009

Die steel for plastic molding were used as mold material of automobile parts and electronic component industry. The material of this paper has superior to mechanical properties, such as repair weldability, corrosion resistance and high temperature strength, required mold parts for semitransparent. Laser-induced surface hardening technology is widely adopted to improver fatigue life and wear resistance via localized hardening at the surface of mold parts. The objective of this research work is to investigate on the characteristics of surface hardening of the laser process parameters, such as beam travel speed, laser power and defocsued spot position, for the case of die steel for plastic molding. Lens for surface hardening of large area is plano-convex type with elliptical profile to maintain uniform laser irradiation. According to the experimental results, large size of hardened layer at the surface of die steel for plastic molding was achieved, and microstructure of this layer was lath martensite. Optimal surface status and mechanical property of hardened layer could be obtained at 1095Watt, $0.25{\sim}0.3m/min$, 0mm (focal length: 232mm) for laser power, beam travel speed, and focal position. Where, heat input was $0.793{\times}10^{3}J/cm^2$, and width of hardened layer was 27.58mm.