• 제목/요약/키워드: vessel collision load

검색결과 18건 처리시간 0.022초

구조물의 선박충돌 해석 (Ship Collision Analysis of Structures)

  • 이성로;배용귀;이계희
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제10권4호
    • /
    • pp.87-96
    • /
    • 2006
  • 선박충돌에 따른 동적특성을 분석하기 위하여 선박의 질량 및 속도에 따른 변화와 구조물의 재료 및 형상에 따른 유한요소 해석을 수행하였다. 해석을 통하여 선박과 구조물의 손상과 충돌하중-시간이력을 얻었다. 본 연구에서는 유한요소해석의 결과를 미국과 일본 및 유럽의 일부 국가에서 연구된 자료와 비교하였다. 동적특성들은 선박과 구조물의 상호작용에 따라 서로 달랐다. 선박-구조물 상호작용에 대해 많은 요소들이 영향을 미치는 것으로 보인다. 선박의 충격과 관련된 동적충격이 가해지는 동안의 재료와 구조물에 있어서의 비탄성거동에 대해서는 극히 미비한 정도의 정보만이 가용하기 때문에, 경험과 올바른 공학적 판단에 기반한 가정들을 사용하여야 한다. 따라서 선박과 구조물의 상호작용에 대한 보다 많은 연구가 필요하다.

차량 충돌하중을 받는 RC 압축부재의 성능기반형 저항성능 평가방법 개발 (Development of Performance Based Resistance Capacity Evaluation Method for RC Compression Member under Vehicle Impact Load)

  • 김장호;이나현;판덕헝;김성배;이강원
    • 콘크리트학회논문집
    • /
    • 제22권4호
    • /
    • pp.535-546
    • /
    • 2010
  • 최근 교량구조물의 증가와 더불어 차량 및 선박과 시설물 간의 충돌사고가 발생할 확률이 높아지고 있다. 특히 교량을 구성하는 상부구조와 하부구조 중에서 충돌에 의한 영향은 주로 교각 등의 하부구조가 받을 가능성이 크다. 교각에 차량 혹은 선박이 충돌하게 되면 교량 하부구조에 국부적인 손상을 유발하게 되며, 충돌사고는 훨씬 더 순간적이고 강한 물리적인 질량의 충돌을 동반할 수 있으며, 극단적인 경우 상부구조의 붕괴까지 유발할 수 있다. 그러므로 이 연구에서는 콘크리트 구조물인 교량의 교각과 같은 압축부재에 대한 설계 시 차량 등에 의한 충돌을 고려하고, 차량 충돌하중에 의한 손상지수를 정량적으로 평가하기 위해서 기존의 설계방법을 개선하고 새로운 구조물의 저항성능 평가방법을 정립하기 위하여 동적유한요소해석 프로그램인 LS-DYNA를 이용하여 교각단면, 차량의 충돌각에 따른 충격도, 축력 및 축력비, 콘크리트 강도, 주철근비와 횡방향 철근, 세장비 등을 변화시켜 케이스별 해석을 수행하였다. 이 연구 결과를 통해 콘크리트 구조물의 거동해석 및 설계기법을 Bayesian 통계방법을 이용한 만족도 곡선을 통해 충격하중을 받을 시의 성능 기반형 저항성능 평가방법을 개발하였으며, 이는 실제 충격하중에 의한 구조물의 방호성능 및 설계 시에 적절하게 적용할 수 있을 것으로 판단된다.

CSR-H를 적용한 SUEZMAX급 TANKER의 구조해석 결과 및 고찰 (A study on structural analysis for suezmax tanker applied CSR-H)

  • 박성영
    • 대한조선학회 특별논문집
    • /
    • 대한조선학회 2017년도 특별논문집
    • /
    • pp.73-79
    • /
    • 2017
  • IACS enacted Harmonized CSR(CSR-H) to meet the IMO GBS applied from 1 July 2016. CSR-H is clearly complement and integrate than present CSR-BC & CSR-OT. One of the biggest issue in new rule is structural analysis. In CSR-H, structural analysis must carried out entire each cargo area including the aft bulkhead of the aftermost cargo hold and the collision bulkhead. Accordingly, new load and boundary conditions are present, an additional structural reinforcement is required by the structural analysis result for each cargo hold. In this study, we applied CSR-H to existing 158K DWT CLASS CRUDE OIL TANKER in order to compare and analyze the hull changes. It is useful for the application of the CSR-H to the similar vessel and helpful in finding the optimized structural design.

  • PDF

쇄빙연구선 ARAON호의 국부 빙하중 추정을 위한 영향계수행렬의 보완 (Enhanced Influence Coefficient Matrix for Estimation of Local Ice Load on the IBRV ARAON)

  • 조성록;최경식;손범식;정성엽;하정석
    • 대한조선학회논문집
    • /
    • 제58권5호
    • /
    • pp.330-338
    • /
    • 2021
  • This paper focuses on the improvement of the influence coefficient matrix method for estimation of local ice load on the icebreaking research vessel ARAON. The influence coefficient matrix relates ice pressure on the hull plate to the measured/calculated hull strain/stress. Conventionally von Mises equivalent stresses representing hull stresses and ice pressure acting on the hull plate are utilized to assemble the influence coefficient matrix. Because of the three dimensional features of the ship-ice collision process, an enhanced method to assemble the influence coefficient matrix is derived considering ice loads in the X, Y, and Z direction simultaneously. Furthermore the location of ice loads acting on hull-plate may fall outside the measuring sensor area, and the enhanced influence coefficient matrix is modified to reduce the difference between the actual and the estimated ice loads by expanding the domain outward from the sensor area. The developed method for enhanced influence coefficient matrix is applied to IBRV ARAON during the 2019 Antarctic ice field test and the local ice loads in three directions are efficiently calculated compared to those by a conventional method.

실선시험에 의한 DWT 8,000톤 선박의 조종성능 - Semi-balanced rudder and flap rudder - (Maneuverability of a DWT 8,000-ton oil/chemical tanker by real sea trials - A comparison between the semi-balanced rudder and the flap rudder -)

  • 안영수;이형근;박병수;장충식
    • 수산해양기술연구
    • /
    • 제51권2호
    • /
    • pp.257-264
    • /
    • 2015
  • This study is intended to provide navigator with specific information necessary to assist the avoidance of collision and the operation of ships to evaluate the maneuverability of dead weight tonnage 8,000 tons Oil/Chemical tanker. The actual maneuvering characteristics of ship can be adequately judged from the results of typical ship trials. Author carried out sea trials based full scale for turning test, Z" maneuvering test, man overboard rescue maneuver test, inertia stopping test. Consequently, $2^{st}$ Overshoot yaw angle of the semi balanced rudder and flap rudder in ${\pm}20^{\circ}$ zig-zag test showed $22.2^{\circ}$ and $18.0^{\circ}$, respectively. The maneuverability of the vessel was good in the flap rudder. The man overboard rescue maneuver maneuverability test was most favorable in the flap rudder and the full load condition. The results from tests could be compared directly with the standards of maneuverability of IMO and consequently the maneuvering qualities of the ship is full satisfied with its.

Rolling Test Simulation of Sea Transport of Spent Nuclear Fuel Under Normal Transport Conditions

  • JaeHoon Lim;Woo-seok Choi
    • 방사성폐기물학회지
    • /
    • 제21권4호
    • /
    • pp.439-450
    • /
    • 2023
  • In this study, the impact load resulting from collision with the fuel rods of surrogate spent nuclear fuel (SNF) assemblies was measured during a rolling test based on an analysis of the data from surrogate SNF-loaded sea transportation tests. Unfortunately, during the sea transportation tests, excessive rolling motion occurred on the ship during the test, causing the assemblies to slip and collide with the canister. Hence, we designed and conducted a separate test to simulate rolling in sea transportation to determine whether such impact loads can occur under normal conditions of SNF transport, with the test conditions for the fuel assembly to slide within the basket experimentally determined. Rolling tests were conducted while varying the rolling angle and frequency to determine the angles and frequencies at which the assemblies experienced slippage. The test results show that slippage of SNF assemblies can occur at angles of approximately 14° or greater because of rolling motion, which can generate impact loads. However, this result exceeds the conditions under which a vessel can depart for coastal navigation, thus deviating from the normal conditions required for SNF transport. Consequently, it is not necessary to consider such loads when evaluating the integrity of SNFs under normal transportation conditions.

부영양화된 해양환경의 수질개선을 위한 해양생태계모델링의 적용 ; 한국의 진해만 (Application of ecosystem modeling for the assessment of water quality in an eutrophic marine environment; Jinhae Bay)

  • 이원찬;박성은;홍석진;오현택;정래홍;구준호
    • 해양환경안전학회:학술대회논문집
    • /
    • 해양환경안전학회 2006년도 추계학술발표회
    • /
    • pp.217-219
    • /
    • 2006
  • This study focused an water quality response to land-based pollution loads and the appropriate pollutant load reduction in Chinhae Bay using an eco-hydrodynamic model. Land-based discharge foam urban areas, industrial complex and sewage treatment plant was the greatest contributor to cause red-tide blooms and summer hypoxia. Tidal currents velocity af the ebb tide was about 10 cm/s stronger than that of the flood tide. A residual current was simulated to. have a slightly complicated pattern with ranging from 0.1 to. 2.7 cm/s. In Masan Bay, pollutant materials cannot flaw from the inner to the outer bay easily because af residual currents flaw southward at surface and northward at the bottom. The simulation results of COD distribution showedhigh concentrations aver 3 mg/L in the inner part of Masan Bay related pollutant discharge, and charge, and lower levels less than 1.5mg/L in the central part of Chinhae Bay. For improvement water quality in Chinhae Bay, it is necessary to reduce the organic and inorganic loads from paint sources by mare than 50% and ameliorate severe polluted sediment.

  • PDF

AHP 분석 기반 항해사 필요 선박조종성능 식별 연구 (Study on the Identification of Ship Maneuverability Required for Navigational Officers based on AHP Analysis)

  • 강석용;안영중;유용웅;이윤석
    • 해양환경안전학회지
    • /
    • 제28권5호
    • /
    • pp.800-808
    • /
    • 2022
  • 국제해사기구에서는 해상에서의 선박의 충돌방지와 그로 인한 해양환경의 보호를 목적으로 1993년 11월 선박조종성능에 대한 잠정지침을 채택한 이후, 축적된 데이터를 바탕으로 2002년 12월 선박조종성능에 대한 확정된 지침을 채택하였다. 하지만 채택된 지침은 만재상태, 등흘수 및 선박의 최대 출력(MCR)의 85 %에 해당되는 선속의 최소 90 % 이상에서의 지침으로, 동 지침은 항해사에게 필요한 실 항해조건에서의 조종성능 정보를 제공하는 데 한계가 있다. 따라서 본 연구에서는 항해사, 선장 및 선박조종에 대한 식견을 갖추고 있는 전문가를 대상으로 빈도분석과 AHP 분석기법을 실시하여 현 지침에 대한 활용도 및 실제 선박조종에 필요한 정보가 무엇인지를 식별하였다. 연구결과 선박을 운항하는 항해사에게 필요한 조종성능 정보는 5~10°의 소각도에서의 선회권 정보, 항해속력(Sea speed)이 아닌 조종속력(Maneuvering speed)에서의 z-test 정보라는 것을 확인하였고, 속도제어 관련하여서는 항해속력 및 만재상태에서의 정지성능에 대한 정보보다 감속타력, 가속타력 등에 대한 정보가 더 필요하다는 것을 확인하였다. 도출된 결과는 선박을 조종하는 항해사에게 필요한 선박조종성능기준 지침마련에 대한 기초자료로 활용도가 높을 것으로 사료된다.