• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.759-765
• /
• 2002

Prestressing tendons in the wall of circular storage tank are investigated from the viewpoint of equivalent load method. Special attention is paid to the effectiveness of eccentricities of the hoop and vertical tendons. Local effect at the bent Point of vertical tendon in the wall with varying thickness is examined. Some aspects which are frequently overlooked or misinterpreted in the conventional analyses of vertical tendons are discussed. Numerical examples are presented to emphasize the significance of accurate analysis of the vortical tendon in practice. It is expected that the equivalent load method can be effectively used to simplify the analysis of tendons in the circular wall and to minimize the errors.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.175-182
• /
• 2015

Objective : The purpose of this study was to investigate difference in fascicle behavior of the medial gastrocnemius during the locomotion with varying intensities, such as gait and one-legged and two-legged vertical jumping. Methods : Six subjects (3 males and 3 females; age: $27.2{\pm}1.6yrs.$, body mass: $62.8{\pm}9.8kg$, height: $169.6{\pm}8.5cm$) performed normal gait (G) at preferred speed and maximum vertical jumping with one (OJ) and two (TJ) legs. While subjects were performing the given tasks, the hip, knee and ankle joint motion and ground reaction force was monitored using a 8-infrared camera motion analysis system with two forceplates. Simultaneously, electromyography of the triceps surae muscles, and the fascicle length of the medial gastrocnemius were recorded using a real-time ultrasound imaging machine. Results : Comparing to gait, the kinematic and kinetic parameters of TJ and OJ were found to be significantly different. Along with those parameters, change in the medial gastrocnemius (MG) muscle-tendon complex (MTC) length ($50.57{\pm}6.20mm$ for TJ and $44.14{\pm}5.39mm$ for OJ) and changes in the fascicle length of the MG ($18.97{\pm}3.58mm$ for TJ and $20.31{\pm}4.59mm$ for OJ) were observed. Although the total excursion of the MTC and the MG fascicle length during the two types of jump were not significantly different, however the pattern of length changes were found to be different. For TJ, the fascicle length maintained isometric longer during the propulsive phase than OJ. Conclusion : One-legged and two-legged vertical jumping use different muscle-tendon interaction strategies.

• Structural Engineering and Mechanics
• /
• v.72 no.3
• /
• pp.355-366
• /
• 2019

Self-centering wall (SCW) is a resilient and sustainable structural system which incorporates unbonded posttensioning (PT) tendons to provide self-centering (SC) capacity along with supplementary dissipators to dissipate seismic energy. Hysteretic energy dissipators are usually placed at two sides of SCWs to facilitate ease of postearthquake examination and convenient replacement. To achieve a good prediction for the skeleton curve of the wall, this paper firstly developed an analytical investigation on lateral load responses of self-centering walls with distributed vertical dampers (VD-SCWs) using the concept of elastic theory. A simplified method for the calculation of limit state points is developed and validated by experimental results and can be used in the design of the system. Based on the analytical results, parametric analysis is conducted to investigate the influence of damper and tendon parameters on the performance of VD-SCWs. The results show that the proposed approach has a better prediction accuracy with less computational effects than the Perez method. As compared with previous experimental results, the proposed method achieves up to 60.1% additional accuracy at the effective linear limit (DLL) of SCWs. The base shear at point DLL is increased by 62.5% when the damper force is increased from 0kN to 80kN. The wall stiffness after point ELL is reduced by 69.5% when the tendon stiffness is reduced by 75.0%. The roof deformation at point LLP is reduced by 74.1% when the initial tendon stress is increased from $0.45f_{pu}$ to $0.65f_{pu}$.

• Korean Journal of Head & Neck Oncology
• /
• v.17 no.2
• /
• pp.198-204
• /
• 2001

Background and Objectives: As the laryngopharyngeal cancer is usually found at a advanced stage, it is difficult to get a wide surgical margin that preserves functional aspect and that is oncologically safe simultaneously. There were many operative technique to fulfill this principle, but none were satisfactory. Recently there were some reports about glottic and pharyngeal reconstruction using radial forearm free flap(RFFF) with palmaris longus tendon, which provided satisfactory oncologic and functional results. We attempted to perform this technique and to test usefulness at patients of laterally localized laryngopharyngeal tumor. Materials and Methods: Three patients were reconstructed glottis and pharynx using radial forearm free flap with palmaris longus tendon. Two hypopharyngeal cancer (T2N0M0) patients were performed wide vertical hemilaryngopharyngectomy and one supraglottic cancer(T2N0M0) patient was performed horizontovertical laryngopharyngectomy. Deglutitional function was evaluated with modified barium swallow and speech function was evaluated by speech pathologist. Results: Mean follow-up time was 29.3 months. There were no cancer recurrence. Their speech was satisfy-actory at social communication and oral feeding. They all have a complete oral nutrition from 26 days to 53 days. Decanulation time was from 71 days to 30 months. Conclusion: Glottic and pharyngeal reconstruction with radial forearm free flap could be accepted as a promising technique which offers a wide resection margin but satisfactory functional result in lateralized laryngohypopharyngeal cancer patients.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.167-168
• /
• 2012

Analysis on structural effects which are reduction of friction coefficient and increase of tendon area by HDPE greased and large size strand in post-tensioning system of reactor containment building was carried out. Effective ratio of tendon force increases 67% to 83% by HDPE greased strand and vertical, horizontal internal section forces increased maximum 51%, 41% respectively. Tendon quantity could be reduced 30% by large size and HDPE greased strand that can maintain safety of ultimate internal pressure same as at present.

• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.105-116
• /
• 2009

Reinforced concrete (RC) structures have been most widely used because of their good economic efficiency. However, it is very weak in tensile stresses and difficult to control deflection due to the heavy self-weight of concrete. On the other hand, it is generally known that prestressed concrete structures can be the most effective to overcome the demerits of RC structures by using various tendon lay-out and its amount. In the prestressed concrete members, the inflection points of tendons should be placed effectively for the deflection control and the moment reduction. Therefore, in this study, the equations of tendon profiles are derived in terms of polynomials that satisfy essential conditions of tendon geometries such as inflection points and natural curved shapes of tendons placed in continuous members, from which vertical components of prestressing forces can be also calculated. The derived high order polynomial expression for the distributed shape of the upward and downward forces was transformed to an simplified equivalent uniform vertical force in order to improve the applicability in the calculation of member deflection. The influences of vertical forces by tendons to deflection and moment in a continuous slab were also considered depending on the distance from column face to the location of tendons. The applicability of the proposed method was examined by an example of deflection calculation for the cases of slabs with and without tendons, and the efficiency of deflection control by tendons was also quantitatively estimated.

• Korean Journal of Head & Neck Oncology
• /
• v.21 no.1
• /
• pp.35-41
• /
• 2005

Wide vertical hemilaryngopharyngectomy with immediate glottic and pharyngeal reconstruction using a radial forearm free flap is reported in 1991 by Chantrain et al. This procedure was designed for the preservation of healthy hemilarynx and resection of pharynx with safe oncological margin in especially piriform sinus cancer or supraglottic cancer invading the hypopharynx. In the original paper, they used palmaris longus tendon for reconstruction of neoglottis. In other groups, they used rib cartilage instead of palmaris longus tendon. In this paper, we report two cases of piriform sinus cancer patients who treated with wide vertical hemilaryngectomy with radial forearm free flap reconstruction. In one case, the operation was performed as Chantrain et al described. But in another case, the ipsilateral forearm was impossible due to the positive Allen's test. So the contralateral forearm flap and rib cartilage graft was done. This reconstructive technique make large resection possible. As the dissection of thyroid cartilage and lateral displacement makes direct visualization and manipulation of piriform sinus lesions, sufficient resection margin in lateral and inferior pharyngeal wall cab be obtained.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5A
• /
• pp.289-297
• /
• 2012

This study proposes an experimental formula that can estimate the applied tensile stress of a bonded PSC by measuring a longitudinal stress wave velocity of tendon. To develop practical formula, the various bonded PSC specimens are constructed with different levels of prestresses. For all the bonded PSC specimens, the longitudinal impact-echo tests are repeated with various experimental conditions. Considering a few influence factors such as temperature, length and the number of strands, the application of the law of similarity results in a nondemensional experimental formula that could estimate existing tensile stress on tendon by measuring its longitudinal stress wave velocity. Next, a feasibility study of proposed approach has been conducted for a real reactor building containment. The estimated stress levels of two vertical tendons embedded in the nuclear plant are close to their design values.

• Journal of the Korean Society of Physical Medicine
• /
• v.11 no.4
• /
• pp.11-17
• /
• 2016

PURPOSE: There are several standard interventions for managing Achilles tendinitis, including eccentric exercise and calf muscle stretches, orthoses, electrotherapy, and taping. However, no study has determined the effect of non-elastic taping on deloading the Achilles tendon while vertical jumping. Therefore, this study determined the effect of non-elastic taping on ankle dorsiflexion and the triceps surae muscle activity while vertical jumping in healthy subjects. METHODS: The study recruited 17 participants. A motion analysis system was used to measure the angle of ankle dorsiflexion and wireless surface electromyography was used to measure the soleus and gastrocnemius activities while vertical jumping. Non-elastic taping was applied on randomized leg side. All subjects performed maximal effort vertical jumps without and with non-elastic taping, with three trials for each condition. The mean peak dorsiflexion and muscle activities during the three trials were calculated and paired t-tests were used to compare the mean values without and with non-elastic taping. Significance was defined as (p<.05). RESULTS: The maximum angle of ankle dorsiflexion and activity of the gastrocnemius muscle decreased significantly when non-elastic tape was applied (p<.05), while there was no significant difference in the soleus activity between no-taping and taping (p>.05). CONCLUSION: We introduce non-elastic taping as a method to decrease maximum ankle dorsiflexion and gastrocnemius activity while vertical jumping.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.9-18
• /
• 2006

These studies show that I applied to functional insole (a specific S company) for minimizing shocks and sprain people's ankle arising from running. How to an effect on human body which studied a kinematics and kinetics from 10 college students during experiments. This study imposes several conditions by barefoot, normal running shoes and put functional insole shoes ran under average $2.0{\pm}0.24$ meter per second by motion analysis, ground reaction force and electromyography that used to specific A company. First of all, Motion analysis was caused by Achilles tendon angle, Angle of the lower leg, Angle of the knee, Initial sole angle and Barefoot angle. Second, Contact time, Vertical impact force peak timing, Vertical active force and Active force timing, and Maximum loading rate under impulse of first 20 percent and Value of total impulse caused Ground reaction force. Third. The tendon fo Quadriceps femoris, Biceps femoris, Tibialis anterior and gastronemius medials caused. electromyography. 1. Ground reaction force also showed that statically approximates other results from impact peak timing (p.001), Maximum loading rate(p<.001), Maximum loading rate timing (p<.001) and impulse of first 20 percent (p<.001). 2 Electromyography showed that averagely was distinguished from other factors, and did not show about that. Above experiment values known that there was statically difference between Motion analysis and Ground reaction force under absorbing of the functional insole shoes which was not have an effect on our body for kinetics and kinematics.