• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.85-92
• /
• 2020

This study adopted soil test and laboratory physical model experiments to simulate the tailings impoundment accumulation process according to the principle of similarity. Relying on the practical engineering, it analyzed the tailings deposition characteristics on dry beach surface during the damming process, as well as the variation rules of dam saturation line. Results suggested that, the tailings particles gradually became finer along the dry beach surface to inside the impoundment. The particle size suddenly changed at the junction between the deposited beach and the water surface, which displayed an obvious coarsening phenomenon. Besides, the deposited beach exhibited the vertical feature of coarse upward and fine downward on the whole. Additionally, in the physical model, the saturation line elevated with the increase in dam height, and its amplitude was relatively obvious within the range of 1.0-4.5 m away from the initial dam. Under flood condition, the saturation line height was higher than that under normal condition on the whole, with the maximum height difference of 4 cm. This study could provide an important theoretical basis for further studies on dam failure experiments and the evolution rules of leaked tailings flow.

• 한국측량학회지
• /
• 제36권2호
• /
• pp.43-50
• /
• 2018

영상을 기반으로 하는 3차원 위치결정에서 카메라는 핵심적인 요소이며 이러한 카메라의 내부적인 특성을 제대로 결정하는 카메라 캘리브레이션 작업은 대상물의 3차원 좌표를 결정하기 위해서 필수적으로 선행되어야 할 과정이다. 본 연구에서는 캘리브레이션을 위한 체크보드의 크기와 형태에 영향을 받지 않고 반자동으로 카메라의 내부표정요소를 결정하는 방법론을 제안하였다. 제안한 방법론은 쿼터니언을 이용한 외부표정요소 추정, 캘리브레이션 타겟의 인식, 번들블록조정을 통한 내부표정요소 매개변수 결정으로 구성되어 있다. 체스보드 형태의 캘리브레이션 타겟을 이용하여 내부표정요소를 결정한 후 소규모 3차원 모형에 대한 3차원 위치를 결정하였으며 검사점을 이용한 정확도 평가를 통해서 수평위치와 수직위치 오차는 각각 약 ${\pm}0.006m$와 ${\pm}0.007m$를 얻을 수 있었다.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.212-223
• /
• 2015

Purpose: Physical properties of Detarium microcarpum seeds were investigated as a function of moisture content to explore the possibility of developing bulk handling and processing equipment. Methods: Seed size, surface area, and 1,000-seed weight were determined by measuring the three principal axes, measuring area on a graph paper, and counting and weighing seeds. Particle and bulk densities were determined using liquid displacement and weight in a measuring cylinder, respectively. Porosity was computed from particle and bulk densities. Roundness and sphericity were measured using shadowgraphs. Angle of repose and static and kinetic coefficients of friction were determined using the vertical cylindrical pipe method, an inclined plane, and a kinetic coefficient of friction apparatus. Results: In the moisture range of 8.2%-28.5% (db), the major, intermediate, and the minor axes increased from 2.95 to 3.21 cm, 1.85 to 2.61 cm, and 0.40 to 1.21 cm, respectively. Surface area, 1,000-seed weight, particle density, porosity, and angle of repose increased from 354.62 to $433.19cm^2$, 3.184 to 3.737 kg, 1060 to $1316kg/m^3$, and 30.0% to 53.1%, respectively, whereas bulk density decreased from 647.6 to $617.2kg/m^3$. Angle of repose increased from $13.9^{\circ}$ to $28.4^{\circ}$. Static and kinetic coefficients of friction varied between 0.096 and 0.638 on different structural surfaces. Conclusions: Arithmetic mean, geometric mean, and equivalent sphere effective diameters determined at the same moisture level were significantly different from each other, with the arithmetic mean diameter being greatest. Surface area, 1,000-seed weight, particle density, porosity, and angle of repose all increased linearly with moisture content. Bulk density decreased linearly with moisture content. The coefficients of friction had linear relationships with moisture content. The highest values of static and kinetic coefficients of friction were observed on galvanized steel and hessian fabric, respectively, whereas the lowest values were observed on fiberglass.

• 한국제4기학회지
• /
• 제22권1호
• /
• pp.28-36
• /
• 2008

The present study has focused on the environmental changes and evidences for sedimentation in the Lake Khuvsgul catchment during the Holocene period, inferred from short core sediment (BO03) from the eastern shore of Borsog Bay, which were analyzed in order to review records of the Holocene climatic evolution and Holocene history in Northern Mongolia. For the purpose of reconstruction of natural phenomenon that occurred in the lake catchment system during the Holocene, physical and chemical properties including HCl-soluble material, biogenic silica, organic matter and grain size distribution of minerals in the core sediments have been analyzed in this study. The vertical variations in composition for these properties show distinctly that five lines of paleoenvironmental evidence occurred in the lake catchment during the Holocene. A modified age model resulting from AMS carbon dating for the BO03 core sediment shows timings of these environmental events at 9.5 Kyr BP, 8.0 Kyr BP, 5.6 Kyr BP and 3.2 Kyr BP, respectively. Paleoenvironmental changes in the Lake Khuvsgul catchment system during the Holocene highlight distinctive features of the hydrological regime and geomorphologic evolution in the lake catchment due to regional landscape and global climatic changes corresponding with the Holocene optimum and thermal optimum. In particular, the change of hydrologic regime based on the sedimentological evidence has been caused by not only overland flow due to melting water, but also base flow due to thick permafrost around Khuvsgul region.

• 한국해안해양공학회지
• /
• 제1권1호
• /
• pp.71-80
• /
• 1989

본 연구에서는 무한요소의 개념을 선형파의 회절 및 방사문제에 적용하는 방법에 대해서 연구하였다. 유체의 동압에 의한 하중은 관성력이 중요하다고 가정하여, 점성효과는 무시하였다. 물체 주변의 내부영역은 통상적인 유한요소를 사용하여 모형화하였으며, 외부영역은 특수한 형상함수를 갖는 무한요소로 모형화하였다. 본 연구에서 개발된 무한요소의 형상함수는, 외부영역의 속도포텐셜을 보다 잘 나타내기 위하여, 외부영역의 해를 해석적 고유함수로 표시하였을 때 나타나는 진행파항과 첫번째 산란파항의 점근적인 형태를 사용하여 결정하였으며, 수치해석상의 효율성을 증가시키기 위하여, 무한요소의 시스템행렬 구성시 나타나게 되는 무한방향으로의 적분을 해석적으로 수행하였다. 본 무한요소의 효율성 및 타당성을 입증하기 위하여, 실제 많이 응용되고 있는 연직 축대칭 구조물을 대상으로 수치해석을 수행하였다. 수치해석결과, 아주 적은 수의 요소로 유체영역을 분할했음에도 불구하고, 적분방정식을 이용한 기존의 여러결과들과 아주 잘 일치함을 알 수 있었다. 또한, 해석의 효율성과 해의 정확도에 직접적으로 영향을 주는 무한요소의 위치와 유한요소의 크기에 대한 기준설정을 위한 수치실험도 수행하였다.

• 환경영향평가
• /
• 제20권4호
• /
• pp.539-555
• /
• 2011

Newly constructed, high-rise dense building areas by urban development can cause changes in local wind fields. Wind fields were analyzed to assess the impact on the local meteorology due to the land use changes during the urban redevelopment called "Eunpyeong new town" in north-western Seoul using CFD_NIMR_SNU (Computational Fluid Dynamics, National Institute of Meteorological Research, Seoul National University) model. Initial value of wind speed and direction use analysis value of AWS (Automatic Weather Station) data during 5 years. In the case of the pre-construction with low rise built-up area, it was simulated that the spatial distribution of horizontal wind fields depends on the topography and wind direction of initial inflow. But, in the case of the post-construction with high rise built-up area, it was analyzed that the wind field was affected by high rise buildings as well as terrain. High-rise buildings can generate new circulations among buildings. In addition, small size vortexes were newly generated by terrain and high rise buildings after the construction. As high-rise buildings act as a barrier, we found that the horizontal wind flow was separated and wind speed was reduced behind the buildings. CFD_NIMR_SNU was able to analyze the impact of high-rise buildings during the urban development. With the support of high power computing, it will be more common to utilize sophisticated numerical analysis models such as CFD_NIMR_SNU in evaluating the impact of urban development on wind flow or channel.

• 패션비즈니스
• /
• 제4권4호
• /
• pp.83-96
• /
• 2000

The purpose of this study is to offer the basic data for chinese men' clothing construction. This study analyzes characterization and classification of body types of the Chinese men with body measurement values. This researcher executed the body measurement of total 39 items on 414 chinese men in Beijing and Shanghai aged 20-49 years old and analyzed the data with methods of analysis of variance, factor analysis and cluster analysis using it as the study item. The results of this study can be summarized as follows; 1. As the result of comparative analysis of the body measurements by age group and region group, the horizontal items such as the widths, depths, and girths increased with advancing ages, while heights decreased. 2. As the result of factor analysis on the items, 5 factors on such as the first factor on the obesity of body, the second factor on the size of vertical of body, the third factor on the length of upper body, the forth factor on the width of the shoulder, the fifth factor on the degree of dropping shoulder were extracted. 3. As the result of classification based on the cluster analysis, the body type were classified into 5 types. So, to see the feature of body form by types, type 1 was small stature, short parts of the body. type 2 was tallest, fattest and type 3 was small stature, fat. type 4 was tall, long length arm and leg, thick waist. type 5 was tall, long length arm and leg, fat.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권5호
• /
• pp.75-81
• /
• 2011

최근 건설되는 교량은 철근 콘크리트 대신에 주로 프리스트레스트 콘크리트 교량이 주종을 이루고 있다. 프리스트레스 콘크리트 (PSC)는 철근 콘크리트 (RC)가 지니는 균열발생 문제, 철근의 부식, 누수 등 내구성에 미치는 약점을 보완할 수 있다. 또한 프리스트레싱으로 인한 인장영역의 보완으로 인하여 구조물의 크기를 줄일 수 있다. 하지만 이러한 구조용 주재료인 고강도 콘크리트의 경우는 밀도가 강도에 비하여 상대적으로 크기 때문에 상대적으로 자중을 증대시키는 문제가 있다. 따라서 자중을 감소시킬 수 있는 경량골재를 활용한 중공형 PPC 거더 (Hollowed Prefabricated Prestressed Concrete girder systems using Light Aggregate, 이하 HPPCLA)는 이러한 문제점을 해결할 수 있는 대안이 될 수 있다. 본 연구에서는 HPPCLA 거더의 성능시험 뿐 만 아니라 수치해석을 수행하였으며, 그 결과 HPPCLA 거더는 전형적인 휨파괴 형상을 나타내었다. 수치해석에서 예상한 바와 같이 PPC 거더의 사용하중인 110 kN에서는 완전한 탄성거동으로 구조물의 사용성에는 무리가 없을 것으로 판단된다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권1호
• /
• pp.82-88
• /
• 2005

Treatment methods of mandibular condylar fracture were conservative and surgical method. Surgical method of mandibular high condylar fracture was very difficult because approach and internal fixation of small size fracture fragment were difficult. So there is a tendency to select conservative method over surgical method for guiding a stable occlusion and avoiding TMJ disorder and growth disturbance, minimizing pain and deviation during function. But, in case of mandibular high condylar fracture patient who has no biting teeth on posterior teeth area, guiding a stable occlusion and conservative functional treatment were very difficult. In this case, patient was 62years old male. He had fracture of mandibular symphysis, right mandibular body, left mandibular high condyle. We treated the patient for mandibular symphysis and right mandibular body fracture area with surgical method. But left mandibular high condylar fracture area was difficult to treat with surgical method. So we selected a conservative functional method on left mandibular high condylar fracture area. We intended recovery of vertical dimension and stable occlusion with implantation of immediate provisional implant on maxillar and mandibular posterior teeth area, and temporary crown. And then patient did mandibular functional movement and his mandibular function was recoverd.

• 대한치과보철학회지
• /
• 제23권1호
• /
• pp.13-37
• /
• 1985

Biocompatibility of dense synthetic hydroxylapatite is well known and the direct bond with adjacent bone developed. The purpose of this study was to evaluate the potential of clinical application of tooth ash for preservation of alveolar ridge. For this purpose the author performed an experimental implantation of the particulate and root form of both pure dense hydroxylapatite and tooth ash in alveolar sockets immediately after extraction. The pure dense hydroxylapatite was particulate form and root form made by Calciteck Inc. The tooth ash was prepared by incineration at $950^{\circ}C$, and the syrindrical form of the tooth ash was sintered and trimmed to fit the size of the each extraction socket of 10 mongrel dogs. After sugery the clinical, roentgenographical, and histological observation was carried out. The results obtained were as follows; 1. Clinical observation disclosed no dehiscence and exfoliation due to tissue rejection. 2. Vertical resorption of alveolar bone occurred in all experimental sockets as well as the control sites on the roentgenograph. 3. Osteoclastic activity appeared at the inner surfaces of the crestal alveolar bone on the 1st week but disappeared on the 2nd week. 4. There were macrophages in the particulate form on the 1st and 2nd week after surgery but no macrophages appered in the root form. S. New bone formation was developed from the bony wall of experimental sockets and grew to bond with the implant materials. In particulate form the new bone formation did not occur in central zone independently. 6. Tooth ash implant sites were covered with the newly formed bony trabeculation from third week, but Calcitite particles were covered with soft tissue. 7. Generally the healing occurred more rapidly in control sites than in implant sites.