• 한국항공우주학회지
• /
• 제41권11호
• /
• pp.849-854
• /
• 2013

본 연구에서는 편대비행하는 고속 항공기의 날개 끝 와류의 공력 간섭 효과를 연구하기 위해서 풍동실험기법이 적용되었다. 편대비행에서 앞선 항공기의 날개 끝에서 발생하는 와류가 뒤따르는 항공기의 공력 특성에 영향을 미칠 수 있다. 흐름의 간섭 효과는 앞선 항공기와 뒤따르는 항공기의 날개 끝 사이의 거리에 따라서 변화된다. 본 연구의 실험결과 앞선 항공기에서 발생되는 날개 끝 와류는 뒤따르는 항공기의 공력 및 모멘트 계수를 변화시킴을 확인하였다. 특히, 후방 항공기의 양력계수는 수직 및 수평 위치에 따라 y/b=-0.125, z/b=0.0에서 가장 많이 증가되거나 y/b=-0.5, z/b=0.38에서 가장 크게 감소됨을 확인하였으며, 두 항공기로부터 발생된 날개 끝 와류의 간섭 현상이 자세히 관찰되었다.

• Archives of Plastic Surgery
• /
• 제35권5호
• /
• pp.581-588
• /
• 2008

Purpose: It is generally accepted that anatomical structures of the soft tissue in Asian faces are quite different from those in Caucasian. It is presumed that these differences are due to collagen rich thick dermis and durable superficial musculo-apponeurotic system (SMAS) in Asian. We classified the aging lower eyelids and reviewed the operative procedures according to the types of aging lower eyelids in Asian. Methods: We compared preoperative and postoperative photos of 117 patients over 30 years of age, who underwent lower blepharoplasty at the Kyunghee Medical Center from January 2001 to April 2006. We classified the patients based on the degree of skin laxity, presence of nasojugal groove and malar bag, the extent of aging process. We also reviewed the operative procedures according to each type of classification. Results: We classified our patients into four types as following. Type I patients showed minimal skin-muscle excess confined to lower eyelids regardless of the facial line. For these patients, we performed only transcutaneous or transconjunctival blepharoplasty. In type II patients, nasojugal grooves were shown and skin- muscle laxity was limited to the medial side of imaginary vertical line at lateral margin of pupil. In these cases, we performed free fat graft or fat repositioning on nasojugal groove or fat removal and septal duplication confined to medial side. Type III patients displayed more advanced medial bulging and remarkable laxity over the lateral side, the same operation methods as those of type II were applied at the lateral side of the line. Type IV patients demonstrated extensive midfacial aging changes including malar bags and underwent superficial subciliary cheek lift. Conclusion: The lower eyelid aging of Asian is different from those of Caucasian. We think that our classification is useful in selection of appropriate operative procedure to address specific problems for Asian patients.

• 한국의류학회지
• /
• 제21권2호
• /
• pp.286-291
• /
• 1997

The purpose of this study is to examine the effect of clothing habits wearing cool or warm in daily life on motor ability. A group of ten healthy young females were divided into a cold (C) group and a warm (W) group. From autumn to winter, C group was advised to wear cool clothing, and W group, warm Clothing. The subject's physical fitness were tested in October, initial stage of the clothing training and March of the following year, final stage of the training. The measurements were taken after the subjects rested in a thermoneutral room conditioned at 23$\pm$2$^{\circ}C$ over 1 hour. The test items were weight, skinfold thickness, grip strength (right, left), back-lift strength, vertical jump, sit-ups, Irosmax, side step test, single-foot standing test with eyes closed, and standing trunk flexion. Changes in motor ability of each group between initial stage and final stage of the training were compared. 1. Muscle strength, part of the motor revelation capacity, showed no significant change in the both ,Troops. On the other hand, strength and power showed a decrease in the both groups and C group showed a sharp decrease. 2. Muscular endurance and cardio-pulmonary fitness, part of the motor continuation capacity, were increased after the training and the degree of increase was great in C group. 3. C group showed significant increase in motor coordination capacity including agility, balance, and flexibility after the training, while Wgroup showed significant increases only in balance. 4. Weight and skinfold thickness as a part of the physique showed no significant change.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권5호
• /
• pp.442-455
• /
• 2016

The resistance and seakeeping performance of a high-speed monohull vessel were investigated through a series of model tests in a towing tank. The hull had a slender wave-piercing bow, round bilge, and small deadrise angle on stern. Tests on the bare hull in calm water were first conducted and tests on spray rails followed. The spray rails were designed to control the flow direction and induce a hydrodynamic lift force on the hull bottom to reduce trim angle and increase rise of the hull. The maximum trim of the bare hull was $4.65^{\circ}$ at the designed speed, but the spray rails at optimum location reduced trim by $0.97^{\circ}$. The ship motion in head seas was examined after the calm water tests. Attaching the rails on the optimum location effectively reduced the pitch and heave motion responses. The vertical acceleration at the fore perpendicular reduced by 11.3%. The effective power in full scale was extrapolated from the model test results and it was revealed that the spray rails did not have any negative effects on the resistance performance of the hull, while they effectively stabilized the vessel in calm water and waves.

• 대기
• /
• 제23권3호
• /
• pp.245-264
• /
• 2013

Heavy rain over the Gangwon region has distinct characteristics in the temporal and spatial distribution of rainfall, most of which are concentrated on a very short period of time and either part of Yeongdong and Yeongseo regions. According to its regional distribution, heavy rain events over the Gangwon region may be classified into Yeongdong and Yeongseo heavy rain in which rainfalls of more than 110 mm $(6 hrs)^{-1}$ (heavy rain warning) have been observed in at least one of the weather stations over only Yeongdong or Yeongseo region, but over the other region the rainfalls are less than 70 mm $(6 hrs)^{-1}$ (heavy rain advisory). To differentiate between Yeongdong and Yeongseo heavy rain, 9 cases for Yeongdong heavy rain and 8 cases for Yeongseo heavy rain are examined on their synoptic and mesoscale environments using some meteorological parameters and ingredients. In addition, 8 cases are examined in which heavy rain warning or advisory are issued in both Yeongdong and Yeongseo regions. The cases for each heavy rain type have shown largely similar features in some meteorological parameters and ingredients. Based on an ingredient analysis, there are three common and basic ingredients for the three heavy rain types: instability, moisture, and lift. However, it is found that the distinct and important process producing strong upward vertical motions may discriminate among three heavy rain types very well. Yeongdong heavy rain is characterized by strong orographic lifting, Yeongseo heavy rain by high instability (high CAPE), and heavy rain over both regions by strong synoptic-scale ascent (strong 850 hPa Q-Vector convergence, diagnostics for ascent). These ingredients and diagnostics for the ingredients can be used to forecasting the potential for regional heavy rain. And also by knowing which of ingredients is important for each heavy rain type, forecasters can concentrate on only a few ingredients from numerous diagnostic and prognostic products for forecasting heavy rain events.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.157-157
• /
• 2010

Vertical-structure light-emitting diodes (V-LEDs) by laser lift-off (LLO) have been exploited for high-efficiency GaN-based LEDs of solid-state lightings. In V-LEDs, emitted light from active regions is reflected-up from reflective ohmic contacts on p-GaN. Therefore, silver (Ag) is very suitable for reflective contacts due to its high reflectance (>95%) and surface plasmon coupling to visible light emissions. In addition, low contact resistivity has been obtained from Ag-based ohmic contacts annealed in oxygen ambient. However, annealing in oxygen ambient causes Ag to be oxidized and/or agglomerated, leading to degradation in both electrical and optical properties. Therefore, preventing Ag from oxidation and/or agglomeration is a key aspect for high-performance V-LEDs. In this work, we demonstrate the enhanced thermal stability of Ag-based Ohmic contact to p-GaN by reducing the thermal compressive stress. The thermal compressive stress due to the large difference in CTE between GaN ($5.6{\times}10^{-6}/^{\circ}C$) and Ag ($18.9{\times}10^{-6}/^{\circ}C$) accelerate the diffusion of Ag atoms, leading to Ag agglomeration. Therefore, by increasing the additional residual tensile stress in Ag film, the thermal compressive stress could be reduced, resulting in the enhancement of Ag agglomeration resistance. We employ the thin Ni layer in Ag film to form Ni/Ag mutli-layer structure, because the lattice constant of NiO ($4.176\;{\AA}$ is larger than that of Ag ($4.086\;{\AA}$). High-resolution symmetric and asymmetric X-ray diffraction was used to measure the in-plane strain of Ag films. Due to the expansion of lattice constant by oxidation of Ni into NiO layer, Ag layer in Ni/Ag multi-layer structure was tensilely strained after annealing. Based on experimental results, it could be concluded that the reduction of thermal compressive stress by additional tensile stress in Ag film plays a critical role to enhance the thermal stability of Ag-based Ohmic contact to p-GaN.

• 한국항공우주학회지
• /
• 제40권8호
• /
• pp.711-717
• /
• 2012

스포츠급 경항공기 개념 설계 단계에서 항공기의 정적 안정성 분석을 위해 1/5 축소모델로 풍동시험을 수행하였다. 제안된 경항공기의 동체 단독 및 동체에 주익, 수평꼬리날개, 수직꼬리날개 등을 조합한 6개 형상에 작용하는 공력을 내장형 밸런스를 이용하여 측정하고 정안정 미계수를 도출하여 기본 양항력 공력특성 및 각 요소가 세로 방향 가로 정안정 특성에 미치는 효과를 분석하였다. 풍동시험 결과로부터 특히, 수평꼬리날개와 수직꼬리날개 그리고 고익형태와 상반각을 갖는 주익 등이 각각 세로, 방향, 가로 정안정성에 미치는 기여정도를 정량적으로 파악하였으며, 본 시험결과는 항공기 각 형상 구성품 조합의 정안정 특성에 관한 유용한 실험자료로 활용될 수 있을 것이다.

• Archives of Plastic Surgery
• /
• 제36권2호
• /
• pp.205-210
• /
• 2009

Purpose: Corrugator supercilii muscle pulls eyebrow to inferomedial direction and produces the vertical component of the glabellar line formation. Current techniques for eliminating of glabellar frown include direct resection of corrugators and botulinum toxin injection. Muscle resection in endoscopic face lift procedure is relatively complex and has many disadvantages ranging from possible nerve injury, postoperative edema, pain and a long recovery period. The Botox treatment on the other hand is much more simple in technique but has a short duration of action. The authors have attempted new ways of finding improved treatment of the glabellar frown by selectively blocking of motor nerves innervating the corrugator supercili muscle by using radiofrequency ablation technique. Methods: A total of 80 patients were recruited in our study during the period between Feb. 2007 to June 2008. A probe was introduced from the supraorbital ridge and advanced to the corrugator supercilii muscle. Nerve stimulator was then used to locate the nerve innervating the corrugator and radiofrequency ablation of the nerve was done. Results: In all patients, there were marked improvement in glabellar frown after treatment. There were no reported cases of any relapses during the follow up period. No complication was noted such as facial nerve injury. No patient complained of any adverse symptoms other than slight discomfort due to swelling of the operation site. Conclusion: The treatment of glabellar frown lines using selective nerve block with radiofrequency ablation was not only less invasive but also excellent in surgical outcomes.

• 한국항공우주학회지
• /
• 제33권2호
• /
• pp.22-31
• /
• 2005

본 연구에서는 회전익 항공기의 수직 이/착륙 성능과 고정익 항공기의 고속/고효율 순항 비행 성능을 모두 가지는 Canard Rotor/Wing 항공기 최적 형상설계를 수행하였다. CRW 항공기의 특징인 로터/날개 가변 방식과 로터 회전 시 팁 제트를 통하여 회전력을 얻는 점 때문에 기존의 회전익 또는 고정익 사이징 프로그램만으로는 바로 적용이 어렵고 Reaction Driven 로터에 대한 해석 모듈의 추가와 회전익/고정익 비행 모드 해석이 혼합되어야 한다. 따라서 기존의 사이징 프로그램을 바탕으로 로터 성능, 덕트 유동, 엔진 유동 해석 코드를 연결하여 Reaction Driven 로터 성능 해석이 가능하게 하였으며, 비행체 외형상 특징과 임무별 비행특징이 반영되도록 사이징 프로그램을 개발하였다. 1500 lbs급 소형 무인기에 대하여 비행체 사이징을 수행하고 성능에 크게 영향을 미치는 설계변수를 파악하여 최적화 문제를 구성하였고 전역적 최적화 기법을 이용하여 최소 중량을 가지는 CRW 항공기의 최적형상을 도출하였다.

• 한국해양공학회지
• /
• 제25권5호
• /
• pp.15-20
• /
• 2011

This study carried out a series of experiments involving impact tests (Drop Weight type & Charpy type with a standard specimen and newly designed I-type specimen), hardness tests, and fracture surface observations of French-made roll shell steel (F), abnormal roll shell steel (M), reheated roll shell steel (R), and S25C steel under heat treatment conditiAn experimental study was carried out to study the solid-liquid mixture upward hydraulic transport of solid particles in vertical and inclined annuli with a rotating inner cylinder. The lift forces acting on a fluidized particle play a central role in many important applications such as the removal of drill cuttings in horizontal drill holes, sand transport in fractured reservoirs, sediment transport, the cleaning of particles from surfaces, etc. In this study a clear acrylic pipe was used to observe the movement of solid particles. Annular velocities varied from 0.4 to 1.2 m/s. The effect of the annulus inclination and drill pipe rotation on the carrying capacity of a drilling fluid, particle rising velocity, and pressure drop in a slim hole annulus were measured for fully-developed flows of water and aqueous solutions of CMC (sodium carboxymethyl cellulose) and bentonite. The rotation of the inner cylinder was efficient at carrying particles to some degree. For a higher particle volume concentration, the hydraulic pressure loss of the mixture flow increased because of the friction between the wall and solids or between solids.