• 한국해양학회지
• /
• 제3권1호
• /
• pp.1-7
• /
• 1968

Two major processes that affect the vertical distribution of apparent pH in the Subarctic region of the Northeastern Pacific Ocean are (1) apparent oxygen utilization by marine organisms and (2) carbonate dissolution. Simplified mathematical approximations show that, in the pH ravge of 7.2 to 8.3, the utilization of 0.1 mM of oxygen (2.24 ml/liter) lowers the pH by 0.20 units and 0.1 mM of carbonate dissolution increases the pH by 0.25 units. Since Oxygen utilization exceeds 0.3 mM while the carbonate dissolution, with respect to the surface, is about 0.05mM, the effect of oxygen utilization is much greater than the dissolution effect of carbonate on the pH of seawater.

• 수산해양기술연구
• /
• 제33권3호
• /
• pp.209-217
• /
• 1997

The objective of this paper is to improve a discomfort caused by the unequal airflow and vertical temperature difference by buoyancy of the supplied hot air in the conventional hot air heating system. In order to the model experiment we manufactured the hot air heater with two air outlet and a model room. We observed the temperature, velocity and airflow distribution and calculated values of PMV and PPD using mean value of central verticality section's air temperature and velocity. We could improve distribution of vertical temperature and velocity at the central section of the model room owing to correlation of hot air of two air outlet.

• 한국해양학회지
• /
• 제22권3호
• /
• pp.119-129
• /
• 1987

KONOD-1 지역의 코아퇴적물은 자생기원의 스멕타이트와 크로높틸로라이트, 육지기원의 일라이트, 크로라이크 및 카오린나이트로 이루어져 있다. 스멕타이트와 크리높틸노라이트의 양은 코아깊이에 따라 증가하며, 특히 크리높틸로라이트는 생성되는 속성기간이 길어서 스멕타이트보다 더 깊은 깊이에서 나타난다. 표층으로 갈수록 육지기원 광물의 함량이 증가하여데, 이는 올리고세 말의 강한 바람의 영향 이거나 해수와 접하는 퇴적물의 용해때문인 것으로 보인다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.3-8
• /
• 2007

The purpose of this study is to grasp the characteristic of indoor thermal environment from large enclosures in connection with heating and cooling condition. This study has measured indoor thermal environment in winter and summer season. We examined indoor thermal environment of the large enclosures in this study which include vertical, horizontal temperature distribution and thermal comfort environment.

• 한국해안해양공학회지
• /
• 제6권4호
• /
• pp.421-438
• /
• 1994

대한해협 조류의 3차원적 분포를 3차원 조석모형에 의해 산정하였다. 모형의 결과는 8개분조의 조석도(등진폭도와 등위상도) 및 조류타원도로서 제시되었으며 또한 이 해역의 특정기간의 조석예보를 위한 분조의 조화상수의 data table로서 작성되었다. 모형의 조석산정결과는 연안관측치와 관측치를 근거한 Odamake(1989)의 조석도와 전선적인 일치를 보였으며 구주대학 응용역학연구소의 조석관측치를 이용한 검증도 수행하였다.

• 대한설비공학회지:설비저널
• /
• 제16권5호
• /
• pp.516-524
• /
• 1987

This paper presents experimental data of fluctuation characteristics of local void fraction of air-water two-phase flow which are associated with the flow pattern, annular gap size and radial location in vertical concentric annuli with coefficient of skewness and kurtosis. The annular gap widths are 13mm, 11mm, and 9mm for a 38m inner diameter as the lucite outer tube. A electrical conductivity probe was used to measure the local void fraction and traversed diametrically from inner wall to outer wall using radial increments of 2mm. It was shown that distribution of the coefficient of skewness and kurtosis, which is related that the one is the asymmetry and the other peakness of local void fraction distribution was influenced by flow pattern, annular gap size and radial location.

• 구강회복응용과학지
• /
• 제21권2호
• /
• pp.169-182
• /
• 2005

The purpose of this study was to compare the stress distribution around the surrounding bone according to the splinted and non-splinted conditions on the finite element models of the two implant crowns with the different vertical bone level. The finite element model was designed with the parallel placement of the two fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st and 2nd molars. As the bone quality, the inner cancellous bone and the outer 2 mm cortical bone were designed, and the cortical and cancellous bone were assumed to be perfectly bonded to the implant fixture. The splinted model(Model 1) had 2 mm contact surface and the non-splinted model(Model 2) had $8{\mu}m$ gap between two implant crowns. Two group (Splinted and non-splinted) was loaded with 200 N magnitude in the vertical and oblique directions on the loading point position on the central position of the crown, the 2 mm and 4 mm buccal offset point from the central position. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual and mesio-distal sections. The results were as follows; 1. In the vertical loading condition of central position, the stress was distributed on the cortical bone and the cancellous bone around the thread of the fixture in the splinted and non-splinted models. In the oblique loading condition, the stress was concentrated toward the cortical bone of the fixture neck, and the neck portion of 2nd molar in the non-splinted model was concentrated higher than that of 1st molar compared to the splinted model. 2. In the 2 mm buccal offset position of the vertical loading compared to the central vertical loading, stress pattern was shifted from apical third portion of the fixture to upper third portion of that. In the oblique loading condition, the stress was distributed over the fixture-bone interface. 3. In the 4 mm buccal offset position of the vertical loading, stress pattern was concentrated on the cortical bone around the buccal side of the fixture thread and shifted from apical third portion of the fixture to upper third portion of that in the splinted and non-splinted models. In the oblique loading, stresses pattern was distributed to the outer position of the neck portion of the fixture thread on the mesio-distal section in the splinted and non-splinted models. Above the results, it was concluded that the direction of loading condition was a key factor to effect the pattern and magnitude of stress over the surrounding bone of the fixture under the vertical and oblique loading conditions, although the type with or without proximal contact did not effect to the stress distribution.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.159.1-159
• /
• 2001

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.161.1-161
• /
• 2003

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2009년도 발표 논문집 제18권
• /
• pp.184-187
• /
• 2009