• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.43-46
• /
• 2007

This paper focuses on examining and evaluating recent results of the national wide horizontal network adjustment which has carried out with respect to the Korean Geodetic Datum 2002 (KGD2002). To do this, 137 geodetic control points were observed by modem GPS technology. After processing all the observations, their outcomes are compared with ones provided by the national wide network adjustment. Results of GPS network show that RMSE is ${\pm}2.7cm\;and\;{\pm}6.5cm$ in horizontal and vertical component, respectively. On the other hand, ones from comparison with EDM network indicate that RMSE is ${\pm}3.0cm$ in horizontal component.

• 한국응용과학기술학회지
• /
• 제15권3호
• /
• pp.77-84
• /
• 1998

Two-component polyurethane flame retardant coatings were prepared by blending phosphate-containing modified polyesters(PMPEs) and TDI-adduct. PMPEs were synthesized by polycondensation of dimethyl phenylphosphonate, a flame retardant component, with 1,4-butanediol, adipic acid, and trimethylolpropane. The content of dimethyl phenylphosphonate was varied 10, 15, and 20wt% for the reaction. Various physical properties of these new flame retardant coatings were comparable to non-flame retardant coatings. Coatings with 20wt% dimethyl phenylphosphonate did not burn during the vertical burning test.

• Wind and Structures
• /
• 제23권6호
• /
• pp.485-503
• /
• 2016

To investigate the nonlinear aerostatic stability of the Hutong cable-stayed rail-cum-road bridge with ultra-kilometer main span, a FEM bridge model is established. The tri-component wind loads and geometric nonlinearity are taken into consideration and discussed for the influence of nonlinear parameters and factors on bridge resistant capacity of aerostatic instability. The results show that the effect of initial wind attack-angle is significant for the aerostatic stability analysis of the bridge. The geometric nonlinearities of the bridge are of considerable importance in the analysis, especially the effect of cable sag. The instable mechanism of the Hutong Bridge with a steel truss girder is the spatial combination of vertical bending and torsion with large lateral bending displacement. The design wind velocity is much lower than the static instability wind velocity, and the structural aerostatic resistance capacity can meet the requirement.

• Journal of Astronomy and Space Sciences
• /
• 제19권1호
• /
• pp.19-24
• /
• 2002

The five space density distribution D(z) wish distance perpendicular to the Galactic plane were combined. The scale heights and the local densities at z = 0 of the thin disk, thick disk, and the halo components were estimated from the nonlinear least square fits of exponential law. The scale heights of the thin disk, thick disk, and the halo components were estimated to be $260{\pm}90$ pc, $660{\pm}220$ pc, and $3.6{\pm}1.4$ kpc, respectively. The density ratio of each components to the thin disk component at the galactic plane, i.e., z = 0.0, were also derived as 1 :0.07:0.002. Our model fit suggests that the thick disk component has a local density of 6.9% relative to the thin disk.

• 한국멀티미디어학회논문지
• /
• 제19권6호
• /
• pp.1014-1023
• /
• 2016

In this study, we presented a method for non-square Differential LBP operation that can well describe the micro pattern in the horizontal and vertical component. We proposed a way to represent a LBP operation with various direction components as well as the diagonal component. In order to verify the validity of the proposed operation, Differential LBP was investigated with respect to accuracy, sensitivity, and specificity for the classification of facial expression. In accuracy comparison proposed LBP operation obtains better results than Square LBP and LBP-CS operations. Also, Proposed Differential LBP gets better results than previous two methods in the sensitivity and specificity indicators 'Neutral', 'Happiness', 'Surprise', and 'Anger' and excellence Differential LBP was confirmed.

• 폴리머
• /
• 제25권3호
• /
• pp.391-398
• /
• 2001

난연성분인 트리브로모아세트산의 함량을 10, 20, 30wt%로 변화시키면서 1,4-부탄디올, 아디프산 및 트리메틸올프로판과 축합중합을 하여 트리브로모 변성폴리에스테르(TBAO)를 합성한 후에, TBAO류와 이소시아네이트를 블렌드하여 2성분계 폴리우레탄(PU) 난연도료를 제조하였다. 제조된 난연도료의 도막물성을 측정한 결과, 결코 비난연도료보다 물성이 저하되지는 않았다. 또한 난연도료의 난연성 시험결과, 수직법에서 트리브로모아세트산 20 wt%에서 불꽃에 타지 않아서 양호한 난연도료임을 알 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.403-422
• /
• 2002

In this study, six two-phase nonboiling heat transfer correlations obtained from the recommendations of our previous work were assessed. These correlations were modified using seven extensive sets of two-phase flow experimental data available from the literature, for vertical and horizontal tubes and different flow patterns and fluids. A total of 524 data points from five available experimental studies (which included the seven sets of data) were used for improvement of the six identified correlations. Based on the tabulated and graphical results of the comparisons between the predictions of the modified heat transfer correlations and the available experimental data, appropriate improved correlations for different flow patterns, tube orientations, and liquid-gas combinations were recommended.

• 제어로봇시스템학회논문지
• /
• 제21권10호
• /
• pp.982-987
• /
• 2015

The inspection machine in SMT (Surface Mount Technology) line detects the assembly defects such as missing, misalignment, loosing, or tombstone. We propose a new method to classify the defect types of chip components by processing the image of PCB. Two original images are obtained from horizontal lighting and vertical lighting. The image of the component is divided into two soldering regions and one packaging region. The features are extracted by appling the PCA (Principle Component Analysis) to each region. The MLP (Multilayer Perceptron) and SVM (Support Vector Machine) are then used to classify the defect types by learning. The experimental results are presented to show the usefulness of the proposed method.

• 한국측량학회지
• /
• 제15권2호
• /
• pp.175-184
• /
• 1997

본 논문에서는 우리 나라 1등 지자기점에서 측정된 지자기 측량성과를 지자기에 대한 기초이론을 도입하여 정리·분석하였으며 지자기의 5성분(편각 D, 복각 I, 수평분력 H, 연직분력 Z, 전자력 F)에 대한 자장분포식을 결정하였다. 또한 결정된 자장분포식으로부터 우리 나라의 지구자장 분포상태를 규명하였으며, 이로부터 우리나라 국가기본도에 표시할 각 도곽별 편각 및 자오선 수차를 제시하였다.

• 디지털산업정보학회논문지
• /
• 제9권1호
• /
• pp.141-150
• /
• 2013

This study proposes technology using Active Shape Model to track the object separating it by depth-sensors. Unlike the common visual camera, the depth-sensor is not affected by the intensity of illumination, and therefore a more robust object can be extracted. The proposed algorithm removes the horizontal component from the information of the initial depth map and separates the object using the vertical component. In addition, it is also a more efficient morphology, and labeling to perform image correction and object extraction. By applying Active Shape Model to the information of an extracted object, it can track the object more robustly. Active Shape Model has a robust feature-to-object occlusion phenomenon. In comparison to visual camera-based object tracking algorithms, the proposed technology, using the existing depth of the sensor, is more efficient and robust at object tracking. Experimental results, show that the proposed ASM-based algorithm using depth sensor can robustly track objects in real-time.