• 동력기계공학회지
• /
• 제12권2호
• /
• pp.35-40
• /
• 2008

This paper deals with the free vibrations of conical shells with linearly variable thickness by the transfer influence coefficient method. The classical thin shell theory based upon the Flugge theory is assumed and the governing equations of a conical shell are written as a coupled set of first order matrix differential equations using the transfer matrix. The Runge-Kutta-Gill integration method is used to solve the governing differential equation. The natural frequencies and corresponding mode shapes are calculated numerically for the conical shells with linearly variable thickness and various boundary conditions at the edges. The present method is applied to conical shells with linearly varying thickness, and the effects of the semi-vertex angle, the number of circumferential waves and thickness ratio on vibration are studied.

• Steel and Composite Structures
• /
• 제19권1호
• /
• pp.1-19
• /
• 2015

The buckling analysis is presented for non-homogeneous (NH) orthotropic truncated conical shells subjected to combined loading of axial compression and external pressure. The governing equations have been obtained for the non-homogeneous orthotropic truncated conical shell, the material properties of which vary continuously in the thickness direction. By applying Superposition and Galerkin methods to the governing equations, the expressions for critical loads (axial, lateral, hydrostatic and combined) of non-homogeneous orthotropic truncated conical shells with simply supported boundary conditions are obtained. The results are verified by comparing the obtained values with those in the existing literature. Finally, the effects of non-homogeneity, material orthotropy, cone semi-vertex angle and other geometrical parameters on the values of the critical combined load have been studied.

• Journal of applied mathematics & informatics
• /
• 제10권1_2호
• /
• pp.245-250
• /
• 2002

Consider the Convex Polygon Pm={Al , A2, ‥‥, Am} With Vertex points A$\_$i/ = (a$\_$i/, b$\_$i/),i : 1,‥‥, m, interior P$\^$0/$\_$m/, and length of perimeter denoted by L(P$\_$m/). Let R$\_$n/ = {B$_1$,B$_2$,‥‥,B$\_$n/), where B$\_$i/=(x$\_$i/,y$\_$I/), i =1,‥‥, n, denote a regular polygon with n sides of equal length and equal interior angle. Kaiser[4] used the regular polygon R$\_$n/ to approximate P$\_$m/, and the problem examined in his work is to position R$\_$n/ with respect to P$\_$m/ to minimize the area of the symmetric difference between the two figures. In this paper we give the quality of a approximating regular polygon R$\_$n/ to approximate P$\_$m/.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.35-41
• /
• 2004

A numerical investigation has been made for flows in an axisymmetric circular cylinder with a rotating cone located at the bottom of the container. The axisymmetric container is completely filled with a viscous fluid. Major parameter for the present research is the vertex angle of the cone, otherwise Reynolds number of fluid and aspect ratio of the vessel is fixed. Main interest is in vortex breakdown of meridional circulation by rotation of the cone with respect to the longitudinal axis of the cylinder. The method to this problem is numerically to integrate momentum and continuity equations on a generalized body fitted grid system. The pattern of vortex breakdown is quite different from that in a right circular cylinder with flat end wall disks. Flow visualization photographs of a preceeding work are compared with the present numerical results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1212-1214
• /
• 2001

In this paper ASIC design technique using VHDL is applied to MRAS based speed sensorless control of induction motor. ASIC for MRAS based speed sensorless control is designed through the description of speed estimator using FSM, stator voltage controller, flux angle detector, coordinate transformation, and inverter switching signal output. Finally the above system has been implemented on the FPGA (VERTEX XCV400HQ240). Simulation and experiment have been performed to verify the performance of the designed ASIC.

• Structural Engineering and Mechanics
• /
• 제13권3호
• /
• pp.329-343
• /
• 2002

In this research, the dynamic stability of an orthotropic elastic conical shell, with elasticity moduli and density varying in the thickness direction, subject to a uniform external pressure which is a power function of time, has been studied. After giving the fundamental relations, the dynamic stability and compatibility equations of a nonhomogeneous elastic orthotropic conical shell, subject to a uniform external pressure, have been derived. Applying Galerkin's method, these equations have been transformed to a pair of time dependent differential equations with variable coefficients. These differential equations are solved using the method given by Sachenkov and Baktieva (1978). Thus, general formulas have been obtained for the dynamic and static critical external pressures and the pertinent wave numbers, critical time, critical pressure impulse and dynamic factor. Finally, carrying out some computations, the effects of the nonhomogeneity, the loading speed, the variation of the semi-vertex angle and the power of time in the external pressure expression on the critical parameters have been studied.

• 한국정보과학회논문지:시스템및이론
• /
• 제27권4호
• /
• pp.416-419
• /
• 2000

G를 꼭지점들이 일반 위치에 있는 n개의 꼭지점을 갖는 볼록다각형이라 하자. 본 논문에서는 두 개의 탐조등을 G의 경계선에 배치하여 G의 내부를 모두 비추는 알고리즘을 개발하는데, 두 탐조등의 최대각을 최소화하는 것이 목적이다. 확장된 real-RAM상에서 O($n^2$) 시간 알고리즘을 제시한다

• 한국안광학회지
• /
• 제13권4호
• /
• pp.9-12
• /
• 2008

목적: 현재의 방독면은 안경을 착용하는 사람들에게는 매우 불편한 구조로 되어 있다. 이를 개선하여 군인이나 소방관들이 자신을 보호하고 인명을 구조하는데 도움이 되도록 하였다. 방법: 외면렌즈와 내면의 시력보정용 렌즈의 2중 구조로 되어 있는 것을 아크릴 프레임을 방독면에 부착하는 단일 구조로 변경하고 실리콘 차단제를 이용하여 렌즈와 프레임 사이를 밀폐하여 가스의 유입을 방지하게 하였다. 렌즈에서 발생하게 되는 비점수차제거와 정간거리 유지를 위해 S자형의 프레임으로 개발하였다. 결과: 완전한 시력교정과 가스차단이 가능하고 일반 안경처럼 안경렌즈를 교환하여 사용할 수 있게 되었으며 시선과 렌즈면의 경사로 발생하던 비점수차 0.53D~1.78D, 짧은 정간거리로 발생하던 0.07D~0.66D의 과교정, 전경각 미설정으로 발생하던 0.1D~0.3D의 비점수차를 제거할 수 있게 되었다. 결론: 방독면을 쓴 상태에서도 밝은 시야의 확보가 가능하여 전투력 향상과 인명구조 활동 등에서 큰 도움이 될 수 있을 것으로 예상된다.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.47-53
• /
• 2018

This study compares the interrelation of fit factor(FF) and visual acuity test by the order of wearing preference between Particulate filtering face piece respirators(PFFR) and glasses for 54 participants. Glasses fitting factors is Optical Center Height(OH), Vertex Distance(VD) and Pantoscopic Angle(PA) or Visual acuity. We measured those factors and expressed by the ratio of standard point and change point. Quantitative fit factor was measured by Portacount Pro+ 8038 and compared the result of preference of wearing order between respirators and glasses. Also, we selected to 6 exercises among 8 exercises OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The pass/ fail criterion of FF was set at 100. Visual acuity test chart is developed by Chunsuk Han was used, Descriptive statistics was performed. Descriptive statistics(SAS ver 9.2), it is used geometric means, Wilcoxon analysis, peason correlation(P=0.05) Fit factor was increased when the respirator was worn before wearing the glasses(p=0.000) and decreased for visual acuity(p=0.000) The negative correlation was showed between OH and Overall fit factor(r=-0.409, p=0.002). Among 54 participants, 11 participants(20.3%) were worn respirator before wearing glasses and 1 participant(1.9%) was worn glasses before wearing respirator. The overall fit test showed the higher level was investigated for the group of participants wearing respirator before wearing glasses in 6 exercises. Also, overall fit factor were increased when participants wore glasses prior to respirator(16.6) to respirator prior to glasses(36.6). Visual acuity were increased when participants wore respirator prior to glasses(93.8) to glasses prior to respirator(106.0). Finally, comparison result of overall fit factor and visual acuity were glasses first choice from mask first choice. The results showed that higher overall fit factor was investigate when the participants wore the respirator prior to glassess at all. The results implied that it is important to maintain the overall fit factor and visual acuity according to the consideration of OH for glasses fitting when worker wore respirator and glasses at the same time.

• 대한방사선기술학회지:방사선기술과학
• /
• 제22권2호
• /
• pp.27-32
• /
• 1999

Cochlear implant poses a contraindication to the magnetic resonance imaging(MRI) process, because MRI generates artifacts, inducing an electrical current and causing device magnetization. CT is relatively expensive and the metal electrodes scatter the image. Post-implantation radiological studies using anterior-posterior transorbital, submental-vertex and lateral views, the intracochlear electrodes are not well displayed. Therefore, the authors developed a special view, which we call the cochlear view. The patient is sitting in front of a vertical device. Then the midsagittal plane is adjusted to form an angle of $15^{\circ},\;30^{\circ}$, and $45^{\circ}$ with the film. The flexion of the neck is adjusted to make the infraorbitomeatal line(IOML) is parallel with the transverse axis of the film. The central ray is directed to exit from the skull at point which is 3.0 cm anterior and 2.0 cm superior to the EAM(external auditory meatus). Results have shown that single radiography of the cochlear view provides sufficient information to demonstrate the position of the electrodes array and the depth of insertion in cochlear. Radiography of the cochlear view in angle of $45^{\circ}$ is an excellent image. The cochlear view gives the greatest amount of medical information with the least radiation and lowest medical cost. It can be widely used in all cochlear implant clinics.