• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.175-178
• /
• 1996

The purpose of this thesis is the propose of various signal processing algorithm for the ECG(electrocardiogram) and the design of realtime automated ECG analyzer feasible with these algorithms. The algorithms are composed of (1)filtering procedure fer the estimation and removal of baseline drift, 60Hz power line interference, and muscle artifacts (2)detection procedure of QRS complex and P wave (3)typification procedure for the pattern classification according to the morphologies (4) selection of representative beat, significant point and wave boundary decision procedure and (5) parameter extraction and diagnosis procedure. All verifications are carried out between the algorithms proposed in this paper and other algorithms already proposed by many researchers, for the objective comparison in each procedure. The efficiency of proposed algorithms are demonstrated with the aid of internationally validated CSE database and the performances of filtering procedure are compared on artificial noise signal as well as actual ECG signals with appropriate noise components. for the comparison on the performance of designed automated ECG analyzer, the diagnosis results were compared with ECG analyzer manufactered by Fukuda denshi in Japan.

• Journal of Power Electronics
• /
• 제17권3호
• /
• pp.686-694
• /
• 2017

Due to the wide use of electronic products, digitally controlled DC-DC converters are attracting more and more attention in recent years. However, digital control strategies may introduce undesirable Limit Cycle Oscillation (LCO) due to quantization effects in the Analog-to-Digital Converter (ADC) and Digital Pulse Width Modulator (DPWM). This results in decreases in the quality of the output voltage and the efficiency of the system. Meanwhile, even if the resolution of the DPWM is finer than that of the ADC, LCO may still exist due to improper parameters of the digital compensator. In order to discover how LCO is generated, the state space averaging model is applied to derive equilibrium equations of a digital PID controlled DC-DC converter in this paper. Furthermore, the influences of the parameters of the digital PID compensator, and the resolutions of the ADC and DPWM on LCO are studied in detail. The amplitude together with the period of LCO as well as the corresponding PID parameters are obtained. Finally, MATLAB/Simulink simulations and FPGA verifications are carried out and no-LCO conditions are obtained.

• 한국통신학회논문지
• /
• 제29권12C호
• /
• pp.1722-1728
• /
• 2004

다수의 인증 경로가 존재하는 PKI 구조에서 인증 경로를 설정하는 것은 중요한 문제이다. 경로 설정은 다양한 검증을 통해 이루어지고 검증이 많을수록 경로의 유효성은 높아진다. 유효성 높은 경로의 선택은 경로 설정 및 검증 작업의 반복 횟수를 감소시킴으로서 고속의 인증서 검증이 가능하도록 하는 반면에 하나의 경로를 설정하는데 소요되는 시간 및 부담을 증가시킨다는 문제점을 가진다. 본 논문에서는 보다 적은 부합으로 경로의 유효성을 높일 수 있는 효율적인 인증 경로 설정 알고리즘을 제안한다.

• 대한원격탐사학회지
• /
• 제10권2호
• /
• pp.109-120
• /
• 1994

The study is aimed at the extraction of the groundwater potential areas utilizing the remotely sensed data from satellites. The results of the study are summarized as follows. Analyses of the existing operational wells for groundwater supply indicate that 81% of them are related with lineaments and 51% of them are located at the intersections of lineameters. Thus the features of lineaments are considered to be one of the most important parameters to extract a high potertial area of groundwater. Taking into acount features of lineament, high potential points were extracted from Landsat TM data based on the theory developed in this research, then verifications were made through actual drilling. The result of verification indicates that 9 points produces more 200 cubic meter/day which is the amount required from economical point of view for an operational use. Since the actual boring was not made on the recommended points for 4 points due to the difficulty of access to the exact points and of the approval for boring, they did not yield enough output. The result might have been improved if the exact points were bored and if the boring bad been made deeper, since the maximum depth of boring was limited to 62 meters.

• Smart Structures and Systems
• /
• 제23권6호
• /
• pp.669-682
• /
• 2019

Vibration mitigation of cables or hangers is one of the crucial problems for cable supported bridges. Previous research focused on the behaviors of cable with dampers or crossties, which could help engineering community apply these mitigation devices more efficiently. However, less studies are available for hybrid applied cross-ties and dampers, especially lack of both analytical and experimental verifications. This paper studied damping and frequency of two parallel identical cables with a connection cross-tie and an attached damper. The characteristic equation of system was derived based on transfer matrix method. The complex characteristic equation was numerically solved to find the solutions. Effects of non-dimensional spring stiffness and location on the maximum cable damping, the corresponding optimum damper constant and the corresponding frequency of lower vibration mode were further addressed. System with twin small-scale cables with a cross-link and a viscous damper were tested. The damping and frequency from the test were very close to the analytical ones. The two branches of solutions: in-phase modes and the out-of-phase modes, were identified; and the two branches of solutions were different for damping and frequency behaviors.

• Composites Research
• /
• 제31권6호
• /
• pp.340-346
• /
• 2018

본 연구에서는 20mm 범용탄약적재장비의 운행 시 탄약의 운동에 관여하는 이중리드나선의 설계를 위해 이중리드나선에 발생하는 응력과 변형에 대하여 ABAQUS 프로그램을 이용해서 해석한다. 해석을 위해 복합재를 적용한 나선형 물체의 회전 시 발생하는 응력 해석의 타당성을 확인한다. 이중리드나선의 재료를 일반 금속과 복합재로 적용하여 해석하고 모델을 복합재료로 대체 하였을 때 이점을 제시한다. 또한 복합재료의 적층각과 적층순서, 회전속도의 변경 시에 발생하는 응력과 변형을 예측하고, Tsai-Wu failure 이론에 해석결과를 적용하여 파손을 확인하며. 탄약적재시 스텝의 개발을 위한 복합재 이중나선구조의 설계결과를 제시한다.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.73-83
• /
• 2019

It is important to clarify the mechanisms of molten-fuel-pool sloshing behavior that might be encountered during a core disruptive accident of sodium-cooled fast reactors. In this study, motivated by acquiring some evidence for understanding the characteristics of this behavior at more realistic conditions, a number of experiments are newly performed by injecting nitrogen gas into a water pool with the accumulation of solid particles. To achieve comprehensive understanding, various parameters including particle bed height, particle size, density, shape, gas pressure along with the gas-injection duration, were employed. It is found that due to the different interaction mechanisms between solid particles and the gas bubble injected, three kinds of regimes, termed respectively as the bubble-impulsion dominant regime, the transitional regime and the bed-inertia dominant regime, could be identified. The performed analyses also suggest that under present conditions, all our experimental parameters employed can have noticeable impact on the regime transition and resultant sloshing intensity (e.g. maximum elevation of water level at pool peripheries). Knowledge and fundamental data from this work will be used for the future verifications of fast reactor severe accident codes in China.

• 전력전자학회논문지
• /
• 제26권3호
• /
• pp.227-236
• /
• 2021

This research proposes a modeling and controller design of a three-level boost (TLB) converter for the implementation of maximum power point tracking (MPPT) in the photovoltaic power conditioning system (PCS). Contrary to the output voltage control of the conventional controller, the Photovoltaic PCS requires an input voltage controller for MPPT operation. A TLB converter has the advantage of decreasing the inductor size and increasing efficiency compared with the existing booster converter. However, an optimal controller is difficult to design due to the complexity of the TLB operations, which have two operational modes on the duty ratio boundary of 0.5. Therefore, the unified linear model equations of the TLB converters, which can be applicable to both operational modes, are derived using linearized solar cell expressions. Furthermore, the transfer functions are obtained for the controller design. The MPPT voltage controller is designed using MATLAB SISOTOOL. In addition, a controller for capacitor voltage unbalancing is described and designed. The simulations and experimental verifications are conducted to verify the effectiveness of the small-signal analysis and control system design.

• 정보보호학회논문지
• /
• 제14권4호
• /
• pp.91-96
• /
• 2004

본 고에서는 J. Black과 P. Rogaway이 설계한 PMAC과 C. J. Mitchell이 설계한 CBC-MAC 변이 알고리즘인 TM$AC^{*}$ 에 대해, 위조 공격(forgery attack) 관점에서 안전성을 고찰한다. Truncation을 사용하는 PMAC 경우에는 약 $2^{n}$ 2+1/개 선택 평문과 약 $2^{n-}$$\tau$번 MAC 검증 과정으로 위조 공격이 가능하고 Truncation을 사용하지 않는 경우에는 약 $2^{n}$ 2+1/개 선택 평문만으로 위조 공격이 가능하다. 또한, TM$AC^{*}$ 의 경우에도 약 $2^{n}$ 2+1/개 선택 평문만 획득하면 위조 공격을 성공할 수 있다.

• 전력전자학회논문지
• /
• 제25권6호
• /
• pp.442-450
• /
• 2020

A small-signal modeling approach for a three-level boost (TLB) converter and a design methodology for a double-loop controller are proposed in this study. Conventional modeling of TLB converters involves three state variables. Moreover, TLB converters have two operation modes depending on the duty ratio. Consequently, complex mathematical calculations are required for controller design. This study proposes a simple system modeling method that uses two state variables, unlike previous methods that require three state variables. Analysis shows that the transfer functions of the two operation modes can be expressed as identical equations. This condition means that the linear feedback controller can be applied to all operational ranges, that is, for full duty ratios. The design method for a double-loop controller using a PI controller is presented in step-by-step sequences. Simulation and experimental verifications are conducted to verify the effectiveness of the small-signal analysis and control system design.