• 한국태양에너지학회 논문집
• /
• 제32권6호
• /
• pp.76-84
• /
• 2012

This study conducted experiments to measure air currents in an experimental building according to external conditions, types of induction ducts, and types of internal sockets by applying an external induction duct comprised of inducing openings and lines and induction units to the kitchen and bathroom vents at the rooftop of a super high-rise apartment building in order to help to improve the venting performance. The study also proposed the optimization of the external induction-style kitchen and bathroom vents capable of wind power generation. (1) As for air current distribution according to vent velocity changes, it increased the venting performance of the kitchen and bathroom by 1.0m/s at vent velocity of 2.0m/s or higher and allowed for wind power generation. (2)As for air current distribution according to external velocity changes, it increased the venting performance of the kitchen and bathroom by 1.2m/s at external velocity of 2.0m/s or higher and allowed for wind power generation. (3)As for air current distribution according to wind direction changes($0{\sim}180^{\circ}$), it was favorable for higher vent velocity when the angle between the external induction duct direction and prevailing wind direction was within ${\pm}30^{\circ}$. (4)As for air current distribution according to induction duct type, the[M1] type combining the inducing openings and lines with the induction units recorded the highest improvement effects in the kitchen and bathroom venting performance by increasing vent velocity by 46%. (5)As for air current distribution according to the changing types of internal sockets where the main ducts of the kitchen and bathroom are connected to the external induction ducts, the venturi tube type[Sv] increased vent velocity by 66% based on the smoothest external inflow.

• Journal of Radiation Protection and Research
• /
• 제40권4호
• /
• pp.244-251
• /
• 2015

본 연구에서는 격납건물의 건전성을 유지시켜 원전 주변의 오염범위를 축소할 수 있는 격납건물 여과배기계통(containment filtered venting system, CFVS)에 초점을 맞추고, 동 설비의 설치 전 후의 피해규모를 분석하여 여과장치의 효용성을 분석하였다. 본 연구에 사용된 코드는 확률론적 영향평가 코드인 MACCS2 이며, 평가에 이용한 사고선원항은 신고리 원자력발전소 1&2 호기의 확률론적 안전성 평가 보고서의 결과를 활용하였다. 주어진 총 19 개의 사고선원항 중 선정된 3 개의 방출군에 대하여 CFVS 적용 전후의 주민이 받는 유효선량과 갑상선선량을 산출하였다. 선량평가 결과는 거리에 따른 선량으로 산출되었으며, IAEA 주민보호조치 권고 기준인 갑상선방호약품 복용 및 방호조치가 필요한 갑상선선량과 유효선량을 초과하는 거리를 기준으로 비교하였다. STC-3, STC-4, STC-6 의 거리에 따른 유효선량은 전 범위(0~35 km)에서 95~99 % 내외의 감소율을 확인할 수 있었으며, 갑상선 선량의 경우 약 96~98 % 내외의 수준으로 유효선량과는 선량감소에서의 비슷한 경향이 있음을 확인 하였다. CFVS 를 적용한 후 대피 및 소개가 취해지는 유효선량 기준값을 초과하는 거리는 모든 방출군에 대하여 평균 1 km 내외로 평가되었다. 특히 STC-4 의 경우 26 km 에서 1.2 km 로 유효 선량을 초과하는 범위가 타 방출군에 비하여 대폭 줄어든 것을 확인할 수 있었다. 갑상선선량 기준값 초과거리의 경우 CFVS 를 적용한 후의 피해범위는 2~3 km 수준으로 산출되었다. 또한 갑상선선량 평가결과는 유효선량의 경우와 같이 STC-4 에서의 피해범위가 대략 50 km 줄어들어 CFVS 적용으로 가장 큰 효과를 보았다.

• 한국가스학회지
• /
• 제3권3호
• /
• pp.51-57
• /
• 1999

본 연구에서는 연료로 많이 사용될 뿐 아니라 폭발사고도 많이 발생하는 액화석유가스(LPG)가 밀폐공간 내에 누출되어 가스폭발사고가 발생할 경우 폭발에 의한 피해발생 현상들의 예측과 위험성을 평가하고자 폭발시 개구부가 발생되는 가스폭발에 대한 폭발특성측정 실험을 실시하였다 . 실험장치의 크기는 가로, 세로, 높이가 각각 60 cm, 100 cm, 45 cm인 폭발통을 사용하였으며 건물 내 가스폭발시 유리창 등이 파열되어 개구부가 발생되는 현상과 유사하도록 폭발통의 한쪽 측면에는 격막을 설치하여 폭발시 파열되도록 하였다. 실험 변수로는 LPG의 농도, 점화위치, 폭발시 발생하는 파구의 면적, 파열면으로부터 거리, 및 파열면의 강도등이며 연구결과, 폭발시 개구부가 생성되는 경우는 밀폐공간과는 달리 농도의 변화보다 파열면의 강도에 의해 폭발특성이 영향을 받으며 점화위치에 의한 폭발특성의 변화도 밀폐공간의 경우에 비해 크게 나타났다. 또한 파열면 개구부가 작을수록, 파열면의 강도가 클수록 파열압력(내부폭발압력)과 외부에 미치는 폭풍압력이 증가하였으며 파열면에서 멀어질수록 폭풍압력이 감소하는 현상들을 알 수 있었다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1996년도 학술발표회
• /
• pp.76-79
• /
• 1996

This paper provides an overview or an introduction covering the nature of explosions, explosion protection techniques and explosion protection systems(EPS), It is not intended to be a result for the design or research of protection including explosion suppression, venting, isolation, and an explanation to the mechanical system.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.201-201
• /
• 2012

• Journal of Welding and Joining
• /
• 제14권5호
• /
• pp.95-105
• /
• 1996

Korea Gas Corporation has operated high pressure gas transmission line of about 600 kilometers and, therefore, a series of repair welding processes are required in order to cope with external defects such as dent, gouge, cracking usually due to mechanical attacks. Most of gas pipelines repair processes are performed after completely venting remaining gas. However, in some case, though it is very unusual, repairs require without venting gas. For instance, this case is that damaged pipeline is remedied with split sleeve by welding. In this paper, in an effort to confirm a safe application of the split sleeve welding, residual stress, strain and temperature distributions are evaluated by computer simulation and experiments. The results obtained are as follows : 1) Computer modelling is supposed to be reasonable because microstructure changes due to welding is simulated coincidently as compare to that of real condition. 2) The maximal temperature on inside surface of pipeline is 50$0^{\circ}C$ for the repair welding process. 3) The amount of residual stress is estimated as the stress corresponding to 0.8% strain. 4) The repair process employed is determined to be technically preferable because of its avoiding cracks and fractures in the course of welding.

• Journal of Chest Surgery
• /
• 제49권3호
• /
• pp.203-206
• /
• 2016

Patients with venoarterial extracorporeal membrane oxygenation (ECMO) frequently suffer from pulmonary edema due to left ventricular dysfunction that accompanies left heart dilatation, which is caused by left atrial hypertension. The problem can be resolved by left atrium (LA) decompression. We performed a successful percutaneous LA decompression with an atrial septostomy and placement of an LA venting cannula in a 38-month-old child treated with venoarterial ECMO for acute myocarditis.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권3호
• /
• pp.335-343
• /
• 2014

An airbag is an important safety system and is well known as a safety system in cars during an accident. Airbag systems are also used as a shock absorber for UAVs to assist with rapid parachute landings. In this paper, the dynamics and gas dynamics of five airbag shapes, cylindrical, semi-cylindrical, cubic, and two truncated pyramids, were modelled and simulated under conditions of impact acceleration lower than $4m/s^2$ to avoid damage to the UAV. First, the responses of the present modelling were compared and validated against airbag test results under the same conditions. Second, for each airbag shape under the same conditions, the responses in terms of pressure, acceleration, and emerging velocity were investigated. Third, the performance of a pressure relief valve is compared with a fixed-area orifice implemented in the air bag. For each airbag shape under the same conditions, the optimum area of the fixed orifice was determined. By examining the response of pressure and acceleration of the airbag, the optimum shape of the airbag and the venting system is suggested.

• Journal of Chest Surgery
• /
• 제48권3호
• /
• pp.210-213
• /
• 2015

Venoarterial extracorporeal membrane oxygenation (VA ECMO) is widely used in patients with cardiogenic shock. Insufficient decompression of the left ventricle (LV) is considered a major factor preventing adequate LV recovery. A 40-year-old male was diagnosed with acute myocardial infarction, and revascularization was performed using percutaneous stenting. However, cardiogenic shock occurred, and VA ECMO was initiated. Severe LV failure developed, and percutaneous transaortic catheter venting (TACV) was incorporated into the venous circuit of VA ECMO under transthoracic echocardiography guidance. The patient was successfully weaned from VA ECMO. Percutaneous TACV is an effective, relatively noninvasive, and rapid method of LV decompression in patients undergoing VA ECMO.

• 한국추진공학회지
• /
• 제22권3호
• /
• pp.134-142
• /
• 2018

가압용 압력용기로부터 오리피스를 통해 기체가 배출되는 경우에 대하여 기체배출특성을 예측하기 위한 모델 개발에 대한 연구이다. 추진체계에 사용하기 적합한 압력용기에 대해 시험을 수행하여 대표적인 압력과 온도를 계측하였고, 압력용기 내부의 열전달에 대한 가정과 이에 대한 모델을 적용하여 시뮬레이션을 통해 압력과 온도를 예측하여 비교하였다. 그 결과 제안된 열전달 모델을 통해 계측된 압력과 온도와 유사한 예측 결과를 확인하였다.