• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.828-841
• /
• 2016

Relatively little information is available regarding the correlation between wood and veneer quality, especially for Samama wood, an endemic wood species in eastern Indonesia. This study addresses the quality of 8 years old Samama wood and its effect on the veneer quality. Samama wood quality was determined by evaluating its specific gravity, moisture content, fiber dimensions, and microfibril angle from pith toward bark. Meanwhile, veneer quality was assessed by examining veneer thickness and lathe check characteristics. Geometry factor model was constructed to elaborate the quantities of lathe check from pith toward bark. Results show that fair variations of veneer thickness, ranging from 1.5 mm to 3.0 mm, could be obtained from Samama wood. The quantity, depth, and length of lathe check were noticeably decreasing toward bark. Further, in the same manufacturing process, geometry factor was determined as the dominant factor over other wood properties in affecting the frequency of lathe checks from pith towards bark. These facts should be put into consideration in producing veneer from Samama wood. Moreover, these results enlighten the potential of Samama wood as plywood and other excellent veneer-based products.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.645-661
• /
• 1995

As the mechanical property of composite resin improved, composite resin has been widely used esthetic dentistry. In the field of esthetic dentistry, the color of prosthetic material is very important. The purpose of this study was to evaluate the color difference of specimens, by the types of alloys and gold electrodeposit. Experimental groups were as follows : Group Prec : Au-Pt alloy with no gold coating and no resin veneer. Group Semi : Pd-Ag alloy with no gold coating and no resin veneer. Group BAse : Ni-Cr alloy with no gold coating and no resin veneer. Group Gsem : Pd-Ag alloy with no gold coating and no resin veneer. Group Gbas : Ni-Cr alloy with no gold coating and no resin veneer. Group PreR : Resin veneer on the Pd-Ag alloy without gold coating. Group SemR : Resin veneer on the Pd-Ag alloy without gold coating. Group GbsR : Resin veneer on the Ni-Cr alloy with gold coating Group BasR : Resin veneer on the Ni-Cr alloy without gold coating. In this study, colors of metal surfaces and veneered resins were evaluated by the CIE $L^{*}a^{*}b$ system. The results obtained were as follows : 1. different alloy types and gold coating make the $L^{*}a^{*}b$ system. 2. The ${\Delta}E^*$ab value between groups semi and Base was less than 1.5 and there was no $a^*$ and $b^*$ value difference between groups Gsem and Gbas 3. The values of $L^*$ and $a^*$ ain groups GsemR and GbasR were so similar that the ${\Delta}E^*$ab value was as small as 0.58. 4. In resin specimens with gold coated semiprecious or base alloys showed yellower and redder deviation than the resin specimens with precious alloy. 5. The ${\Delta}E^*$ab values between goups PreR-GsemR and groups PreR-GbasR were as small as 2.68 and 2.22 respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.86-101
• /
• 1990

The primary objective of this research was to investigate the strength properties of Comply, a composite panel. fabricated with particle board as core material and veneer or plywood as face and back. 20types of comply composites were manufactured according to the four specific gravity levels(0.5, 0.6, 0.7 or 0.8) of particleboard core and three veneer or two plywood thicknesses for face and back. They were tested and compared with matching particleboard (control) on moisture content. specific gravity, bending properties(MOE, MOR SPL). nail resistance and internal bond strength. The obtained results were summarized as follows: The increasing effect of modulus of elasticity was shown by the increase of face and back veneer or plywood thickness. The modulus of rupture and stress at proportional limit of the comply composites bonded with 3mm thick veneers or 3mm thick plywood face and back were higher than 2mm thick veneer or 2mm thick plywood as face and back. Both of modulus of rupture and stress at proportional limit on bending of Comply were higher than those of control board. Also the modulus of elasticity of Comply showed much higher than that of control board. The nail resistance of Comply, composed of plywood as face and back was higher than that of veneer. The nail resistance of control board was higher than that of Comply at Sp.Gr 0.7 and 0.8 core boards. Internal bond of Comply, composed of 1mm and 2mm thick veneer as face and back was higher than that of 3mm thick veneer. The increasing effect of modulus of elasticity was shown by the increase of shelling ratio in Comply composed of veneer and plywood as face and back. The modulus of rupture was increased by the increment of shellmg ratio in Compiy, composed of plywood as face and back. The modulus of elasticity and modulus of. rupture of comply were higher than those of particleboard(control) in effect of shelling ratio. Therefore it was concluded that the mechanical property values of Comply were clearly greater than those of particleboard(control).

• 공업화학
• /
• 제18권3호
• /
• pp.251-254
• /
• 2007

실온에서 베니어에 ammonium chloride, ammonium sulfate, monoammonium phosphate, 그리고 diammonium phosphate와 같은 암모늄염으로 도포하고, 도포된 베니어의 난연성을 조사하였다. 암모늄염으로 도포된 베니어판은 미처리된 순수 베니어판에 비하여 $CO/CO_2$비를 증가시켰다. 이것은 정도에 따라 독성에 영향을 미치는 것으로 생각된다. 암모늄염이 베니어의 난연제로 사용되었을 때, 도포된 암모늄염은 베니어의 난연성을 향상시켰다. 또한 ammonium sulfate와 ammonium chloride로 도포된 베니어는 미처리된 순수 베니어에 비해 양쪽 모두 낮은 총연기방출율과 낮은 총연기량을 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.167-167
• /
• 1982

Italian poplar (Populus euramericana) rotary veneers were press-dried and air-dried to study drying curves, thickness shrinkage and width shrinkage of them under several drying conditions such as drying temperatures and veneer thicknesses. The results of the study are summarized as follows; 1. In press-drying, drying times from green condition to about final moisture content of 10 percent with veneer thickness of 0.6mm by platen temperatures required about 10 minutes at platen temperature of $100^{\circ}C$, 3 minutes at $110^{\circ}C$, 1 minute at $120^{\circ}C$ and $130^{\circ}C$, respectively. 2. In press, drying, drying times from green condition to about final moisture content of 10 percent by veneer thicknesses required 2 minutes at veneer thickness of 0.6mm, 4 minutes at 1.2mm,6 minutes at 1.8mm and 9 minutes at 3.6mm, respectively. 3. In air-drying, drying times from green condition to air-dried moisture content by veneer thicknesses required 15 hours at veneer thickness of 0.6mm, 18 hours at 1.2mm and 23 hours at 2.4mm, respectively. 4. Thickness shrinkage of press-drying was remarkably greater than that of air-drying, but width shrinkage of press-drying was rather smaller. 5. Difference of thickness shrinkage among platen temperatures was insignificant, and width shrinkage at platen temperature of $130^{\circ}C$ was the least.

• 한국가구학회지
• /
• 제18권1호
• /
• pp.13-19
• /
• 2007

The influences of coating on oak veneer overlaid Medium Density Fiberboard (MDF) were evaluated. The hardness of 9mm-MDF by hardness test were increased about 28% with coating on MDF and the more increased hardness of 31% with oak veneer overlaid MDF. The hardness of veneer overlaid MDF increased with increment of the veneer thickness and that of overlaid MDF showed the higher hardness compared to non-overlaid MDF. The optimum moisture content in terms of the hardness of panels MDF was in the range of 7% to 10% and the hardness was decreased with increasing of the moisture content. Any cracks were not overlaid coated on the MDF but the cracks were observed on the overlaid MDF after Soak under Vacuum Dry 10-cycle. The thicker veneer-overlaid MDF showed more cracks.

• Journal of the Korean Wood Science and Technology
• /
• 제42권4호
• /
• pp.407-419
• /
• 2014

잣나무, 리기다소나무, 낙엽송, 백합나무 등 수종과 두께가 다른 평단판 및 단판롤(롤 형태의 단판)을 고정형 마이크로파로 가열하여 가열 전후 형상, 표면 함수율, 함수중량 변화와 표면 열분포를 분석한 결과는 다음과 같다. 평단판의 경우 마이크로파 가열에 따른 품질상태는 비교적 양호한 것으로 나타났지만, 약간의 뒤틀림이 발생하였으며, 이는 비균일 건조응력에 따른 변형과 고정형 마이크로파 장비의 특성상 단판 형태로 가열 시 국부적인 조사가 이루어진 영향이 컸기 때문으로 판단된다. 단판롤 형태의 마이크로파 가열 특성은 가열 후 품질 모두 양호하였으며, 특히 평단판에서 나타난 뒤틀림 등의 결함은 없는 것으로 나타났다. 또한 열분포 및 확산 등이 매우 안정적으로 이루어진 것으로 판단되며, 이러한 열분포는 표면 함수율 분포 및 함수중량 감소에 많은 영향을 미치는 것으로 나타났다. 따라서 단판롤 형태는 수종 및 두께에 따라 출력과 조사시간 등 충분한 시험이 실시된다면, 고정형 장비에서도 충분한 건조효율을 나타낼 수 있을 것으로 판단된다.

• 대한심미치과학회지
• /
• 제22권1호
• /
• pp.4-8
• /
• 2013

This clinical report shows the importance of selecting appropriate materials in fabricating laminate veneer restorations. Such cases should be carefully selected to ensure bonding durability, providing consistently reliable prognosis.

• 대한치과보철학회지
• /
• 제30권1호
• /
• pp.93-101
• /
• 1992

The purpose of this study was to evaluate the effectiveness of core materials and luting agents on the retention of full veneer gold crown. The core materials used in this study was dental amalgam, and composite resin, and the luting agents were zinc phosphate cement, polycarboxylate cement, and glass ionomer cement. The obtained results were as follows. 1. In full veneer gold crown supported by composite resin core, the crown retention with zinc phosphate cement was the highest of all. 2. In full veneer gold crown supported by amalgam core, the crown retention was shown no statistical difference by luting agent. 3. There was no statistical difference in the crown retention between the full veneer gold crown supported by composite resin core and dental amalgam core.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.1055-1063
• /
• 2004

In this study, we developed an automatic veneer sorting system controlled by nonlinear friction and nonlinear stiffness. With these nonlinear characteristics, it was difficult to analysis and to control the system in the fast. However it is necessary to consider nonlinear characteristics to satisfy accurate and rapid control demand in these days. We used not only nonlinear friction but also nonlinear stiffness and combined both to control the system. An experimental device was designed with 4 AC servo-motors and 2 Sensors. Through a series of experiment, we found nonlinear friction characteristics among roller versus veneer and veneer versus veneer and nonlinear stiffness characteristics with stacked veneers. Finally, we showed that the proposed control algorithm was very effective for veneer sorting system with nonlinear friction and stiffness.