• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.285-309
• /
• 1996

Non oxide ceramics such as nitrides of transition metals have shown significant potential for future economic impact, in diverse applications in ceramic, aerospace and electronic industries, as refractory products, abrasives and cutting tools, aircraft components, and semi-conductor substrates amid others. Combustion synthesis has become an attractive alternative to the conventional furnace technology to produce these materials cheaply, faster and at a higher level of purity. However he process os highly exothermic and manifests complex dynamics due to its strongly non-linear nature. In order to develop an understanding of this process and to study the effect of operational parameters on the final outcome, numerical modeling is necessary, which would generated essential knowledge to help scale-up the process. the model is based on a system of parabolic-hyperbolic partial differential equations representing the heat, mass and momentum conservation relations. The model also takes into account structural change due to sintering and volumetric expansion, and their effect on the transport properties of the system. The solutions of these equations exhibit steep moving spatial gradients in the form of reaction fronts, propagating in space with variable velocity, which gives rise to varying time scales. To cope with the possibility of extremely abrupt changes in the values of the solution over very short distances, adaptive mesh techniques can be applied to resolve the high activity regions by ordering grid points in appropriate places. To avoid a control volume formulation of the solution of partial differential equations, a simple orthogonal, adaptive-mesh technique is employed. This involves separate adaptation in the x and y directions. Through simple analysis and numerical examples, the adaptive mesh is shown to give significant increase in accuracy in the computations.

• Annals of Clinical Neurophysiology
• /
• v.5 no.2
• /
• pp.192-196
• /
• 2003

The Lateral dorsal cutaneous branch of sural nerve (LDCB) is a terminal sensory branch of lower extremities. It can be injured frequently in peripheral nerves. However, the normal data of each component of nerve conduction study (NCS) of were not studied at this time. The Nerve Conduction Study of LDCB adults were assessed for amplitude, area, duration and nerve conduction velocity (NCV) in normal fifty. We also evaluated how age, sex and dexterity affect the various components of NCS. The Mean amplitude of LDCB was $9.45{\pm}1.93{\mu}V$, area was $4.05{\pm}0.55{\mu}V/s$, duration was $1.50{\pm}0.13s$, and NCV was $37.9{\pm}3.09m/s$, respectively. The amplitude of right was $10.1{\mu}V$ in men, $8.65{\mu}V$ in women. The area of right was $3.83{\mu}V/s$ in less than 40 years and $4.24{\mu}V/s$ in older than 40 years. The areas of left was $3.86{\mu}V/s$ in less than 40 years and $4.30{\mu}V/s$ in older than 40 years. The NCV was 39.0 m/s in less than 40 years and 36.7 m/s in older than 40 years. All of above differences were statistically significant. There were no statistically significant differences between right and left NCS. Normal data of LDCB could be applicable in peripheral neuropathy or nerve injury.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.236.1-236.1
• /
• 2012

We conducted simultaneous 22GHz water maser and 44GHz class I methanol maser surveys of newly-identified 282 H2 emission features from the $2.122{\mu}m$ H2 narrowband image survey in the Galactic plane (UWISH2 project) using Korea VLBI Network (KVN) 21-m radio telescopes. We detected 16 and 13 new water and methanol maser sources, respectively. This result indicates that at least ~5% of the H2 emission features originate from young stellar objects (YSOs) that are in the right physical condition to produce the water and methanol masers. The masers are closely related to the current outflow activities in the Galactic plane. The power sources of these 23 diffused/collimated H2 emission features (six sources are detected for both masers) are likely to be intermediate-to high-mass YSOs, based on a comparison with the maser luminosities of other well-studied YSOs. Both maser velocities are mostly close to their own systemic velocities within 5 km/s, even though water masers generally show larger variabilities in the line intensities, velocities, and shapes than methanol masers. We also discovered three new water maser sources with high-velocity components: ~25 km/s red-shifted CMHO019, ~50 km/s blue-shifted CMHO132, and ~120 km/s blue-shifted CMHO182. In particular, we propose that the dominant blue-shifted water maser of CHMO182 could become a unique laboratory for the study of high-mass stellar jet and their accelerations.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.61-73
• /
• 2004

Rayleigh wave and Love wave are the major elastic waves belonging to the category of the surface wave. The fact that Love wave is not contaminated by P-wave makes Love wave superior to Rayleish wave and other body waves. Therefore, the information that Love wave carries is more distinct and clearer than the information of Rayleigh wave. In this study, for the purpose of employing Love wave in the SASW method, the dispersion characteristics of the Love wave were extensively investigated by the theoretical, numerical and experimental approaches. The 2-D and 3-D finite element analyses for the half space and two-layer systems were performed to determine the phase velocities from Love wave as well as from both the vertical and the horizontal components of Rayleigh wave. Also, the SASW measurements were performed at the geotechnical sites to verify the results obtained by the numerical analysis. The results of the numerical analysis and the field testing indicated that the dispersion characteristics of Love wave can be an extended information to make better evaluation of the subsurface stiffness structure by SASW method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.737-747
• /
• 2013

A 3-D surveillance radar is a pulsed-doppler radar to provide various target information, such as range, doppler and angle by performing TWS. This paper introduces HW/SW architecture of radar signal processing board to process in real-time using high-speed multiple DSP(Digital Signal Processor) based on COTS. Moreover, we introduced a implemented algorithm consisted of clutter map creation/renewal, FIR(Finite Impulse Response) filter for rejection of zero velocity components, doppler filter, hybrid CFAR and finally presented computational burden of each algorithm by performing operational test using a beacon.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.67-74
• /
• 2008

This paper provides the test results of bonding behavior of the interface between concrete substrate and carbon fiber in the rehabilitation method applying carbon fiber with epoxy based resin adhesive. The difference in each components was gradually increased subjected to the repetition of temperature variation, regardless of the strength of the substrate concrete, while the ultrasonic interface between each component occurred. An increase in difference of the temperature resulted in a decrease in bond strength of each component. Associated failure mode was shown to be interfacial failure and substrate concrete failure. No remarkable changes were found in the deformation and ultrasonic velocity of each component until the four cycles of the dry and moisture test. Hence, the moisture condition may not affect the bonding behavior of each component. After the repetition of dry and moisture test, corresponding bond strength was reduced to 40% of that before test. For the effect of freeze and thaw test, the cycle of freeze and thaw within 4 cycles resulted in debonding of each component.

• Bulletin of the Korean Space Science Society
• /
• 1993.10a
• /
• pp.24-24
• /
• 1993

1991년 한국에서 열렸던 밀리미터파 및 적외선천문학에 관한 동북아시아지역 Workshop에서의 합의에 근거하여, 장래의 동북아시아천문대와 동북아시아 지역에 있어서의 당면적인 국제협력관계를 만들어가기 위하여, 중국오지에서의 지상관측을 위한 1차 부지탐사를 1993년 9월에 대만, 일본, 중국, 한국의 4개국 합동으로 추진하였다. 천문학은 본래 지극히 국제적인 과학이며, 따라서 국제협력없이는 앞으로 나아가지 않는다. 그러나, 과거의 여러 사정에 의해 현재 정상적인 협력관계에 놓여있지 않는 대만, 일본, 중국, 한국이 동북아시아 제국 공통의 최신의 관측소를 가지고서는 상호간에 밀접하게 천문학연구를 진행해 나가기 위한 하나의 꿈이 곧 동북아시아천문대라고 할 수 있다. 동북아시아천문대는 이 지역에서의 천문학의 공통적인 활동장소를 만들어나가는 것을 지향하고 있다. 즉, 여러 나라의 연구자들끼리 자연적으로 밀접한 교류를 행해 나가는 가운데, 천문학을 발전시켜나가는 센터를 만들고자 하는 것이다. 그러므로 여기서 계획하고 있는 부지탐사는 이러한 꿈을 실현해 나가기 위한 첫걸음이라고 할 수 있다. 현재 가시광, 적외선, 밀리미터파, 서브밀리미터파를 막론하고, 지상관측에 있어서 요구되는 조건은 모두 같다고 하겠다. 날씨가 좋고, 건조하여 수증기양이 적으며, 공기의 흔들림이 적고, 인간의 활동에 지장이 없을 정도의 높이와 교통편이 좋을 것 등을 들 수 있다. 그러므로 이번 1차부지탐사에서는 연간일조시간이 3000시간 이상에 달하는 후보지에 대한 대기의 종합적인 측정을 행하며, 아울러 가능하다면 적절한 장소에 소형의 적외선 및 서브밀리미터파의 망원경을 두는 공동계획을 구체화한다.ofile occurs along north-south direction there are a few peaks in most line profiles, and these indicate that there not multiple velocity components along the line of sight. Distributions of excitation temperah at and column density which were estimated from the excitation calculations show the existence of a small(IxEpc),hot(Tex> SOK) core which contains two tempegatlue peaks at -15" east and north of MDS. The column density of HCaN is (1-3):n1014cm-2. Column density at distant position from MD5 is larger than that in the (:entral region. We have deduced that this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.106.1-106.1
• /
• 2013

When strong static magnetic field is applied to the TMP, it is expected that the presence of the magnetic field might retard the velocity of the blades which results in the change of the pumping speed of the TMP. However, such effect of the magnetic field on the TMP has not been well characterized. Thus, under the strong magnetic field, monitoring pumping speed as well as generated heat, pressure, and vibration of the TMP may be an important issue to understand the magnetic field tolerance of the TMP and the development of magnetic shielding technique for the key components of the pump. For this purpose, magnetic field generation system to the vertical direction by a circular current source was firstly designed and suggested [K. Baik et al., 44th Annual Conf. KVS, 22(1), 153, (2012)]. In the current study, another magnetic field generation systems are presented to apply the magnetic field to the horizontal and radial directions by the rectangular current sources and the permanent magnets respectively. Such systems were made to generate at least 50 Gauss of magnetic field along the vertical direction and at least 25 Gauss of magnetic field along the horizontal or radial direction. Current study introduces the evaluation system of the magnetic field along the vertical, horizontal, and radial directions and presents the measured experimental results of the magnetic field when such systems are combined with the equipment where TMP will be installed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.341-347
• /
• 2004

In order to inspect the piping effectively, one of the important components in the facility of power plants, the ultrasonic guided wave was generated by a tomb transducer and was received in a non-contact fashion by using an air-coupled transducer. The guided wave modes that ran be generated by the comb transducer in piping are predicted from the theoretical dispersion curves and the element spacing of a comb transducer. Moreover, to receive the specific modes, the receiving angle of the air-coupled transducer is calculated from Snell's law between the phase velocities of guided waves and the sound velocity of air. The guided wave modes obtained in experiments are identified from the result of time-frequency analysis such as wavelet transform and two-dimensional fast Fourier transform.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.828-836
• /
• 2008

To develop an engineering-model of hydrogen-fueled ultra-micro combustor for Ultra Micro Gas Turbine(UMGT), we reviewed and summarized the problems in downsizing combustors, and determined a suitable burning method. The key issue to actualize practical ultra-micro combustors is reducing heat loss from the combustor to compressor and turbine. The reduction of heat loss was discussed from 3 different viewpoints; heat-insulation material, high-space-heating-rate combustion, and combustor-insolated gas turbine structure. Use of heat-insulation material induced the heat loss reduction to the surroundings. The heat loss ratio decreased substantially in reverse proportion to space heating rate, leading the idea that it could be reduced by burning at a high space heating rate. By settling the combustor insolated from the compressor and turbine, the heat transfer from the combustor to the compressor and turbine becomes smaller. For a selection of the suitable burning method, comparison between 2 burning methods, flat-flame and swirling-flamer types, was conducted. Synthetically the flat-flame burning method was confirmed to be more suitable for ultra-micro combustors than latter one. Base on them, an engineering-model of hydrogen-fueled flat-flame ultra-micro combustor was developed. To obtain high overall heat-insulation, heat-resistant and strength, the engineering-model combustor had triple layer structure with an advanced ceramic, a heat insulation material and a stainless steel. To simplify heat transfer issue in the combustor, it was isolated from the other components. Furthermore it was designed by considering structure, size, material, velocity, pressure loss and prevention of flashback.