• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.149-157
• /
• 2004

Residual stresses can have a significant influence on the fatigue lives of structural engineering components. For the accurate assessment of fatigue lifetimes a detailed knowledge of the residual stress profile is required. Significant advances have been made in recent years fur obtaining accurate and reliable determinations of residual stress distributions. These include both experimental and numerical methods. The purpose of this study is to simulate peening process with the help of the finite element method in order to predict the magnitude and distribution of the residual stresses in accordance with the parameters, which are, e.g. shot velocity, shot diameter, shot impact angle, shot shape, distance between two impinging shots, and material parameters.

• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1503-1516
• /
• 2005

Mean flow and turbulence properties of developing turbulent flows in a 90 degree square bend with span-wise rotation are measured by a hot-wire anemometer. A slanted wire is rotated into 6 orientations and the voltage outputs from them are combined to obtain the mean velocity and the Reynolds stress components. Combined effects of the centrifugal and Coriolis forces due to the curvature and the rotation of the bend on the mean motion and turbulence structures are investigated experimentally. Results show that the two body forces can either enhance or counteract each other depending on the flow direction in the bend.

• 유공압시스템학회논문집
• /
• 제6권3호
• /
• pp.23-31
• /
• 2009

Counter shaft transmission is a popular automatic transmission power train in construction vehicles such as wheel loader and forklift. The gear train layout of counter shaft transmission is a very basic and important development stage because it affects the most of components design including hydraulic system and shift control algorithm, etc. This paper presents a design methodology for the gear train layout from the analysis of power flow path and clutch hook-up of the existing counter shaft transmission that is adopted in commercialized construction vehicles. Also, independent constraints for the meshed gear ratios are derived in order to realize forward 4-speed and reverse 3-speed gear ratio. The layout design principle proposed here was applied to the new original counter shaft transmission that is underdevelopment.

• Smart Structures and Systems
• /
• 제10권1호
• /
• pp.47-65
• /
• 2012

The presence of crack-like defects in mechanical and structural elements produces failures during their service life that in some cases can be catastrophic. So, the early detection of the fatigue cracks is particularly important because they grow rapidly, with a propagation velocity that increases exponentially, and may lead to long out-of-service periods, heavy damages of machines and severe economic consequences. In this work, a non-destructive method for the detection and identification of elliptical cracks in shafts based on stress wave propagation is proposed. The propagation of a stress wave in a cracked shaft has been numerically analyzed and numerical results have been used to detect and identify the crack through the genetic algorithm optimization method. The results obtained in this work allow the development of an on-line method for damage detection and identification for cracked shaft-like components using an easy and portable dynamic testing device.

• 천문학회보
• /
• 제44권1호
• /
• pp.68.1-68.1
• /
• 2019

Using IPHAS $H{\alpha}$ data, we found bright $H{\alpha}$ regions inside the elongated $^{13}CO$ cavity around a Herbig star, MWC 1080. To investigate the ionized hydrogen regions and the molecular cavity, we perform near-IR high-resolution spectroscopic of hydrogen Brackett lines and molecular hydrogen lines by Immersion GRating INfrared Spectrograph (IGRINS) observations. We detected broad Brackett line series and sharp molecular lines with various velocity components. We present three ionized hydrogen regions (near MWC 1080A, MWC 1080E, and CO boundary) with different line widths, central radial velocities, and line ratios. We also show two spatially-separate $Br{\gamma}$ ${\lambda}2.1662{\mu}m$ peaks near MWC 1080A. To reveal a 3D structure of the cavity around MWC 1080, we try to use the detected sharp molecular lines.

• Bulletin of the Korean Chemical Society
• /
• 제15권3호
• /
• pp.193-197
• /
• 1994

Due to possibility of visual observation of phase transformations and processes during solidification, the transparent binary alloy models are important in materials and metallurgical sciences. As such, phase diagram, linear velocity of crystallization, microstructure and spectral behaviour of binary organic systems of benzidine with resorcinol and catechol involving formation of addition compound with congruent melting point have been studied. While their phase diagrams show the formation of two eutectics and a 1:2 (B:RC, B:CT) addition compound in each case, the crystallization data obey the Hillig-Turnbull equation. The microstructural investigations give the characteristic morphology of the eutectics and the addition compounds, the spectral studies suggest intermolecular hydrogen bonding between two components forming the molecular complex.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.644-651
• /
• 2002

The formation and stability of stationary laser weld keyholes are investigated using a numerical simulation. The effect of multiple reflections in the keyhole is estimated using the ray tracing method, and the free surface profile, flow velocity and temperature distribution are calculated numerically. In the simulation, the keyhole is formed by the displacement of the melt induced by evaporation recoil pressure, while surface tension and hydrostatic pressure oppose cavity formation. At laser powers of 500W and greater, the protrusion occurs on the keyhole wall, which results in keyhole collapse and void formation at the bottom. Initiation of the protrusion is caused mainly by collision of upward and downward flows due to the pressure components.

• 재활치료과학
• /
• 제7권3호
• /
• pp.79-88
• /
• 2018

목적 : 본 연구의 목적은 뇌졸중 환자를 대상으로 환측 상지에 진동자극을 적용했을 때, 팔 뻗기 수행에서 나타나는 팔꿈치 움직임의 운동학적 변화를 관찰하기 위함이다. 연구방법 : 연구 설계는 단일집단 교차실험설계(one-group cross-over trial design)를 사용하였으며, 10명의 만성 뇌졸중 환자를 대상으로 하였다. 대상자의 환측 위팔두갈래근(biceps brachii)에 국소 진동자극을 5분, 10분, 20분 동안 무작위로 70Hz로 적용한 후, 3차원 동작분석 시스템을 통해 팔 뻗기 수행의 운동학적 움직임을 분석하였다. 종속변수에는 팔꿈치 움직임에서 나타나는 최대 각 속도, 최대 각속도까지의 시간, 움직임 단위를 포함하였다. 결과 : 팔 뻗기를 수행함에 있어서 팔꿈치의 움직임은 20분 동안 국소 진동자극을 적용하였을 때 보다 빠르고 부드러워졌으며, 효율적으로 나타났다. 팔꿈치 움직임의 최대 각속도는 증가하였고(p<0.05), 최대 각속도까지의 시간과 운동단위는 유의하게 감소하였다(p<0.05). 결론 : 국소 진동자극은 편마비 뇌졸중 환자가 팔 뻗기 움직임을 수행함에 있어 발생하는 운동학적 구성요소를 향상시킬 수 있는 효과적인 방법일 될 수 있다.

• 한국산업보건학회지
• /
• 제11권1호
• /
• pp.34-41
• /
• 2001

Passive samplers have been used for personal, indoor, and outdoor air monitoring of VOCs at ppb concentrations in community and office environments. The path length of modified passive sampler was shortened, so it was intended to increase an uptake rate. The performance of the modified 3M 3500 organic vapor monitor(OVM) as a tool for assessing exposures to toxic air pollutants in nonoccupational community environments was evaluated using combined controlled test atmospheres of six selected target volatile organic compounds(VOCs): benzene, methyl tert-butyl ether(MTBE), chloroform, 1,4-dichlorobenzene, tetrachloroethylene, and toluene. The experiments were conducted by exposing the dosimeters to concentrations of $50{\sim}100{\mu}g/m^3$ on six face velocity(0.00, 0.02, 0.06, 0.12, 0.20, 0.30 m/sec) for 24 hours. If the uptake rate was increased, that means that we could use the passive sampler more effectively. The uptake rates were increased linearly according to reduce the path length. Although the diffusion path length was shortened, the change of uptake rate was within ${\pm}25%$ of theoretical value, indicating that the modified passive sampler(TM) can be effectively used over the range of concentrations and environmental conditions tested with a 24-h sampling period if the face velocities were over 0.12 m/s for 6 components of VOCs. But when the face velocities were less than 0.12 m/s, uptake rates were reduced more than expected values. So, the passive sampler with the shortened path length should be used at indoor or outdoor environment where the face velocity should be over about 0.10 m/s. If the path length was shortened more, the uptake rate was more effected by starvation.

• 보존과학회지
• /
• 제18권
• /
• pp.51-62
• /
• 2006

강진 무위사의 벽화보존각내에 보존된 벽화를 비파괴진단하기 위해 초음파탐사와 열적외선 조사를 실시하였다. 벽체의 진흙은 gravel 1.78 g, sand 5.39 g, silt 4.91 g, clay 6.26 g 이다. 조사된 8개 벽화의 초음파 속도 평균은 보살도(No.5)<관음보살도(No.5)<보살도(No.14)<주악비천도(No.20)<주악비천도(No.17)<오불도(No.3)<삼존도(No.1)<아미타내영도(No.2)로 순서이고 범위는 $71.63\sim3610.11m/s$, 평균 417.44m/s이며 일축압축강도 $70.34\sim533.28kg/cm^2$, 평균 $84.23kg/cm^2$이다. 신선한 진흙벽체의 초음파 속도는 약 850m/s를 내외하고 800 m/s이하의 속도가 나타나는 곳은 최초 발생한 미세균열이 확장되어 물성이 저하된 것으로 예상된다. 600 m/s내외에서는 한 화면에서 물성저하 또는 물성편차가 현저해 질 수 있다. 400m/s 내외의 속도는 진흙벽체가 서서히 압축되어 견고하게 느껴지나 물성은 취약하며 진흙벽체에 입상분해가 발생하기 쉬운 상태는 200 m/s이하의 속도를 나타내었다.