• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.60-68
• /
• 2021

Invisible passenger airbag door system of hard panel types must be designed with a weakened area such that the side airbag will deploy through the instrument panel as like intended manner, with no flying debris at any required operating temperature. At the same time, there must be no cracking or sharp edges in the head impact test. If the advanced airbag with the big difference between high and low deployment pressure ranges are applied to hard panel types of invisible passenger airbag (IPAB) door system, it becomes more difficult to optimize the tearseam strength for satisfying deployment and head impact performance simultaneously. It was introduced the 'Operating Window' idea from quality engineering to design the hard panel types of IPAB door system applied to the advanced airbag for optimal deployment and head impact performance. Zigzab airbag folding and 'n' type PAB mounting bracket were selected.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.3
• /
• pp.8-15
• /
• 2011

The computer-based simulation tools are currently used overwhelmingly to simulate the performance of automotive designs. Then, the search for an optimal solution that satisfies a number of performance requirements usually involves numerous iterations among several simulation tools. Therefore, meta-modeling techniques are becoming widely used to build approximations of computationally expensive computer analysis tools. The set-based approach proposed in the first report of a four-part paper has been a test bed for the innovation of vehicle structure design process in the Structural Design and Fabrication Committee of JSAE(Society of Automotive Engineers of Japan). In the second report, the proposed design approach is illustrated with a side-door impact beam design example using meta-modeling techniques.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.82-87
• /
• 2012

The purpose of this study is to produce a side impact beam with high tensile steel using a roll forming process. The door side impact beam plays an important roll in a car because it protects passengers from external crash. The roll forming process is a continuous bending process wherein a long metal sheet is bended as it continuously passes several rolls. The characteristic of this study is that an impact beam is produced by a continuous process using a ultra high strength steel without a hardening heat treatment. A model was determined by analysing plasticity of a cross section shape considering high strength. Design parameters of the impact beam was determined by crash-analysing the model. Workpiece products were manufactured by designing dies for roll forming and setting them up in a following process line. Results of a bending test and a FEM analysis was considered and reviewed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.181-187
• /
• 2012

Various computer-based simulation tools such as 3D-CAD and CAE systems are widely used to design automotive body structure at the early phase of design. Designers must search the optimal solution that satisfies a number of performance requirements by using their tools and a trial-and-error approach. In the previous three reports, a set-based design approach has been proposed for achieving design flexibility and robustness while capturing designer's preference, and its effectiveness has been illustrated with a simple side-door impact beam design problem and real vehicle side-door structure design. This report presents the development of integrated 3D-CAD and CAE system, and the applicability of our proposal for obtaining the multi-objective satisfactory design solutions by applying to an automotive front-side frame.

• Journal of the KSME
• /
• v.35 no.8
• /
• pp.709-715
• /
• 1995

날로 그 중요성이 대두되고 있는 환경보존 문제에 능동적으로 대응하고 여러 계층 소비자의 안 전도, 쾌적성 등에 관련된 요구, 성능의 수준향상에 효과적으로 대처하기 위해서는 차량의 경량화 기술이 가장 먼저 선행되어야 할 과제이다. 경량화를 추구하는 방법은 최적설계 개념을 이용한 구조합리화에 의한 방법과 알루미늄, 강화 플라스틱 등 신소재 대체에 의한 방법이 병행 연구 되고 있다. 이 글에서는 구조합리화를 통한 경량화 목표를 달성하기 위해 설계 초기 단계에 활용 가능한 단순 보 모델 개발의 필요성에 관해 언급하고 실차의 도어 측면 붕괴강도(door side intrusion strength), 루프 붕괴강도 (roof crush strength) 해석을 위한 단순 보 모델 개발에 관해 소개하고자 한다.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.2
• /
• pp.89-98
• /
• 2000

Using conventional textile techniques such as weaving braiding knitting and stitching it is possible to produce a wide range two and three dimensional fiber preforms, however so far only a limited attention has been given to knitted fabrics in composite industry. This is mainly due to the opinion that knitted fabric reinforced composites posses low mechanical properties owing to their looped fiber architecture. But it is possible to obtain desired mechanical properties by selecting proper knitted fabric structure, In this paper mechanical characteristics of kevlar plain weft knitted fabrics reinforced plastics(KFRP) are evaluated for th development of intrusion beam of car side door. Tensile bending impact properties of KFRP are measured experimentally and crush demands of Americal Federal Motor Vehicle Safety Standard No.214(FMVSS 214) compared with the bending load and displacement of KFRP by quasi-static test method. The applicability and limitation of bending load and displacement of KFRP according to specimen size has been discussed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2005

This paper describes the system for detecting vehicles in the rear and rear-side that access between sidewalk and bus stopped to city road at day by computer vision-based method. This system informs appearance of vehicles to bus driver and passenger for the safety of a bus passenger getting off. The camera mounted on the top portion of the bus exit door gets the rear and rear-side image of the bus whenever a bus stops at the stop. The system sets search area between bus and sidewalk from this image and detects a vehicle by using change of image and sobel filtering in this area. From a central point of the vehicle detected, we can find out the distance, speed and direction by its location, width and length. It alarms the driver and passengers when it's judged that dangerous situation for the passenger getting off happens. This experiment results in a detection rate more than 87% in driving by bus on the road.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.163-170
• /
• 2000

Accident statistics shows that the portion of fatal occupant injuries due to side impacts is considerably high. The side impact usually leads to a severe intrusion of side structure into the passenger compartment. Furthermore, the safety zone for the side impact is relatively small compared to the front impact. Those kinds of physics for side impact frequently result in a fatal injury for the occupant. Therefore, NHTSA and EEVC are trying to intensify the regulation for the occupant protection against side impact. Both the regulation and recent market trends are asking for an installation of side airbag. There are several types of system configuration for side impact sensing. In this paper, we adopt the acceleration-based remote sensing method for the side airbag control system. We mainly focus on the development of hardware and crash discrimination algorithm of remote sensing unit. The crash discrimination algorithm needs fast decision of airbag firing especially for high-speed side impact such as FMVSS 214 and EEVC tests. It is also required to distinguish between low-speed fire and no-fire events. The algorithm should have a sufficient safety margin against any misuse situation such as hammer blow, door slam, etc. This paper introduces several firing criteria such as acceleration. velocity and energy criteria that use physical value proportional to crash severity. We have made a simulation program by using Matlab/Simulink to implement the proposed algorithm. We have conducted an algorithm calibration by using real crash data for 2,500cc vehicle. The crash performance obtained by the simulation was verified through a pulse injection method. It turned out that the results satisfied the system requirements well.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2020

In general, auto parts production assembly line is assembled and produced by automatic mounting by an automated robot. In such a production site, quality problems such as misalignment of parts (doors, trunks, roofs, etc.) to be assembled with the vehicle body or collision between assembly robots and components are often caused. In order to solve such a problem, the quality of parts is manually inspected by using mechanical jig devices outside the automated production line. Automotive inspection technology is the most commonly used field of vision, which includes surface inspection such as mounting hole spacing and defect detection, body panel dents and bends. It is used for guiding, providing location information to the robot controller to adjust the robot's path to improve process productivity and manufacturing flexibility. The most difficult weighing and measuring technology is to calibrate the surface analysis and position and characteristics between parts by storing images of the part to be measured that enters the camera's field of view mounted on the side or top of the part. The problem of the machine vision device applied to the automobile production line is that the lighting conditions inside the factory are severely changed due to various weather changes such as morning-evening, rainy days and sunny days through the exterior window of the assembly production plant. In addition, since the material of the vehicle body parts is a steel sheet, the reflection of light is very severe, which causes a problem in that the quality of the captured image is greatly changed even with a small light change. In this study, the distance between the car body and the door part and the door are acquired by the measuring device combining the laser slit light source and the LED pattern light source. The result is transferred to the joint robot for assembling parts at the optimum position between parts, and the assembly is done at the optimal position by changing the angle and step.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.7
• /
• pp.25-33
• /
• 2012

This paper deals with the development of automatic docking system for the detachable mobile seat(DMS) of a vehicle for the handicapped people who are unable to ride in a car by oneself. Although such vehicles for the handicapped already exist, there is a need for a vehicle with improved docking method for convenience. This paper presents an automatic docking system using two ultrasonic sensors. In order to identify the precise location of the mobile seat in front of the vehicle door, the capability of ultrasonic sensor for detecting the part edge is analyzed and mathematical modeling is performed to measure the exact location of the side edge. And also, this paper presents an automatic docking method using this sensor system and the car lift which is provided in the inside of the car.