• 제목/요약/키워드: vehicle gasoline

검색결과 254건 처리시간 0.021초

CVS-75모드에서 차량의 주행거리, 주행패턴 및 엔진 예열상태에 따른 배출가스 특성 (Emission Characteristics of Vehicles in CVS-75 Mode Under Various Conditions of Driving Distance, Driving Pattern, and Engine Pre-Heating)

  • 엄명도;백두성
    • 대한기계학회논문집B
    • /
    • 제36권5호
    • /
    • pp.503-508
    • /
    • 2012
  • 최근에 들어서 이산화탄소가 지구온난화의 원인으로 알려져 있기 때문에 온실가스 문제는 이슈화 되어 왔다. 본 연구는 한국에서 운행 중인 차량에서 이산화탄소 배출가스 영향인자 특성을 파악하고자 했다. 가솔린 자동차 129대, 디젤자동차 100대, LPG 자동차 34대 차량을 차대 동력계에서 시험했다. 시험과정에서 이산화탄소, 일산화탄소 그리고 연료저감율을 측정했다. 실험모드는 현재 한국에서 경차의 배출가스를 규제하기 위해서 배출계수를 산정하기 위해 개발된 CVS-75 모드에서 이루어졌다. 실험 결과 배기량, 연료소비율, 연료 종류, 주행패턴, 마일수 그리고 이산화탄소 사이의 관련성이 조사되었다.

Evaluation of Voltage Sag and Unbalance due to the System Connection of Electric Vehicles on Distribution System

  • Lee, Soon-Jeong;Kim, Jun-Hyeok;Kim, Doo-Ung;Go, Hyo-Sang;Kim, Chul-Hwan;Kim, Eung-Sang;Kim, Seul-Ki
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권2호
    • /
    • pp.452-460
    • /
    • 2014
  • Due to increased concerns for rising oil prices and environmental problems, various solutions have been proposed for solving energy problems through tightening environmental regulations such as those regarding $CO_2$ reduction. Among them, Electrical Vehicles (EVs) are evaluated to be the most realistic and effective approach. Accordingly, research and development on EVs and charging infrastructures are mainly proceeding in developed countries. Since EVs operate using electric energy form a battery, they must be connected to the power system to charge the battery. If many EVs are connected during a short time, power quality problems can occur such as voltage sag, voltage unbalance and harmonics which are generated from power electronics devices. Therefore, when EVs are charged, it is necessary to analyze the effect of power quality on the distribution system, because EVs will gradually replace gasoline vehicles, and the number of EVs will be increased. In this paper, a battery for EVs and a PWM converter are modeled using an ElectroMagnetic Transient Program (EMTP). The voltage sag and unbalance are evaluated when EVs are connected to the distribution system of the Korea Electric Power Corporation (KEPCO). The simulation results are compared with IEEE standards.

고고도 무인기용 수소 엔진의 시동성 및 공회전 연소 특성 (Start and Idle Combustion Characteristics of Hydrogen Engine for the HALE UAV)

  • 김용래;최영;이장희
    • 한국가스학회지
    • /
    • 제19권6호
    • /
    • pp.22-27
    • /
    • 2015
  • 최근 고고도 장기체공 무인기의 개발이 활발하게 진행되고 있는 가운데, 중량당 에너지 밀도가 높아서 왕복동 엔진의 연료로서 적합한 수소 연료를 적용하는 것이 경제성과 기술성 측면에서 유리한 것으로 검토되었다. 본 연구에서는 2.4리터급 왕복동 가솔린엔진을 수소엔진으로 개조하기 위하여 수소연료를 공급하기 위한 실험장치를 구축하고 수소연료 공급이 가능한 인젝터를 장착하였으며 범용 엔진제어기를 이용하여 엔진을 구동시킴으로써 시동 및 공회전 시의 연소 특성을 파악하였다. 안전하게 엔진 시동성을 확보하였고 공회전 상태를 유지할 수 있는 조건을 탐색하였다. 또한 공회전 상태에서 공연비와 점화 타이밍을 변경해보면서 연소 안정성을 비롯한 기본적인 연소 특성을 살펴봄으로써 향후 수소엔진을 활용한 무인기의 동력원을 개발하기 위한 기초를 마련하였다.

서울시 도로변의 빗물받이에서 체취한 하수슬러지의 중금속 오염 평가 (The Assesment of Heavy metal Pollution in Sewage Sludeges from Gully Pots Alongside Some Main Roads in Seoul, Korea)

  • 이평구
    • 자원환경지질
    • /
    • 제32권6호
    • /
    • pp.633-644
    • /
    • 1999
  • Gully pot is a part of urban darainage system to butter the runoff water fluxes from road to rivers and to minimize environmental pollution by prevending over the surrounding area. A series of studies have been carried out concerning the physicochemical characteristics of the sewage sludge sediments sttling down in such a gully pot in order to over to evaluate the contamination for heavy metals such as pb, Zn, Cu and Cd. The roadside soil and sewage sludge samples from gully pots were characterized by XRD analyses and sequential extraction : Zn 2595.7$\mu$g/g; Cd9.8$\mu$/g; Cu602.5$\mu$g/g; Pb260.0$\mu$g/g),because of a long-term accumulation of vehicle- and industrial-related pollutants. Mean Zn concentration in Yeouido (3873$\mu$g/g) and Junggu(3262$\mu$g/g)areas are 4-5 times higher than those in Dobonggu area, suggesting that Zn may be derived from automobile traffic (including the rubber of automobile tires). The mean concentrations of Cu and Cr are very significantly high in Junggu and Gurogu areas, possibly due to the industrial activities in these areas. The low Pb levels throughtotut the whole study areas in Seoul can be accounted for the use of unleaded gasoline since 1987. Sequential extraction experiments illustrate that a major part of Zn is bound to FII and FIII, representing about 88% of the total Zn concentration. Fraction IV, related to orgnic matter, is mostly significant for Cu accounting for 60% of the total Cu, and FII is next in importance. The main carriers of Pb are the fractions III, II and FIV, and in that order. The behavior of Cd is quite different from other elements (Zn, Cu, Pb), and most of the Cd is associated with FV. Changes in the physicochemical environments (such as acidification) may result in severe environmental pollution of surface water and rivers with respect to heavy metals (especially Zn and Cu).

  • PDF

총 편익과 공 편익에 기반한 자동차 배출저감 정책의 통합관리 전략 (Integrated Management Strategy of Vehicle Emission Reduction Policies Based on Total Benefits and Co-benefits)

  • 이규진;박관휘;심상우;최기주
    • 대한교통학회지
    • /
    • 제33권4호
    • /
    • pp.357-367
    • /
    • 2015
  • 현재의 자동차 배출관리 전략은 단일 배출물질 중심의 정책 접근법으로 인해 정책 효과의 상호 중복이 발생하므로 이를 방지하고 효율적 예산 활용을 위해 통합적 시각에서의 교통-환경 정책을 수립할 필요가 있다. 이에 본 연구에서는 정책들의 개별 또는 통합 추진에 따른 총 편익과 공 편익의 비교를 통해 교통-환경 통합관리 전략의 시사점 도출을 목적으로 한다. 연구결과, 휘발유와 경유를 함께 절감할 수 있는 '승용차 요일제 & 노후 화물차 조기폐차' 정책(MIX-4)의 통합관리가 PM과 $CO_2$를 함께 저감하여 총 편익이 높은 것으로 나타났으며, 배출량 영향인자인 통행량, 통행속도, 배출계수의 3요소를 동시에 제어할 수 있는 '승용차 요일제 & 환경 정책'(MIX-1~4), '혼잡 통행료 부과제 & 환경 정책'(MIX-5~8)의 통합관리가 공 편익 측면에서 더 효과적인 것으로 나타났다. 이러한 결과로 볼 때, 교통-환경 정책의 통합관리는 건강에 유해한 대기오염물질과 기후 변화에 영향을 미치는 온실가스를 동시에 저감시킬 수 있으며, 정책 추진의 효율성을 제고하는데 기여할 것으로 기대된다.

수용체 모델(PMF)를 이용한 서울시 대기 중 VOCs의 배출원에 따른 위해성평가 (Health Risk Assessment with Source Apportionment of Ambient Volatile Organic Compounds in Seoul by Positive Matrix Factorization)

  • 권승미;최유리;박명규;이호준;김광래;유승성;조석주;신진호;신용승;이철민
    • 한국환경보건학회지
    • /
    • 제47권5호
    • /
    • pp.384-397
    • /
    • 2021
  • Background: With volatile organic compounds (VOCs) containing aromatic and halogenated hydrocarbons such as benzene, toluene, and xylene that can adversely affect the respiratory and cardiovascular systems when a certain concentration is reached, it is important to accurately evaluate the source and the corresponding health risk effects. Objectives: The purpose of this study is to provide scientific evidence for the city of Seoul's VOC reduction measures by confirming the risk of each VOC emission source. Methods: In 2020, 56 VOCs were measured and analyzed at one-hour intervals using an online flame ionization detector system (GC-FID) at two measuring stations in Seoul (Gangseo: GS, Bukhansan: BHS). The dominant emission source was identified using the Positive Matrix Factorization (PMF) model, and health risk assessment was performed on the main components of VOCs related to the emission source. Results: Gasoline vapor and vehicle combustion gas are the main sources of emissions in GS, a residential area in the city center, and the main sources are solvent usage and aged VOCs in BHS, a greenbelt area. The risk index ranged from 0.01 to 0.02, which is lower than the standard of 1 for both GS and BHS, and was an acceptable level of 5.71×10-7 to 2.58×10-6 for carcinogenic risk. Conclusions: In order to reduce the level of carcinogenic risk to an acceptable safe level, it is necessary to improve and reduce the emission sources of vehicle combustion and solvent usage, and eco-car policies are judged to contribute to the reduction of combustion gas as well as providing a response to climate change.

엔진 폐열 회수를 위한 이중 회로 랭킨 사이클 성능 해석 (Performance Analysis of Two-Loop Rankine Cycle for Engine Waste Heat Recovery)

  • 김영민;신동길;김창기;우세종;최병철
    • 에너지공학
    • /
    • 제21권4호
    • /
    • pp.402-410
    • /
    • 2012
  • 본 연구에서는 가솔린 엔진 자동차에서 엔진 폐열 회수를 위한 이중 회로 랭킨 사이클 성능 해석이 수행되었다. 고온(HT)의 엔진 배기가스 열회수를 위해서는 물을 사용하는 스팀사이클이 적용되었고, 엔진 냉각수열과 고온 사이클로부터의 응축열을 활용하는 저온(LT) 사이클은 R-134a를 사용하는 유기랭킨사이클이 적용되었다. 고온 및 저온 열원을 동시에 활용하는 이중 회로 시스템의 특성을 파악하기 위해 에너지 및 엑서지 분석이 수행되었다. 고온 및 저온 사이클에 사용되는 용적형 팽창기의 체적이 차량적용을 위한 시스템 최적화에 매우 중요하며 시스템 최적화를 위해서는 반드시 고려되어야 한다. 목표로 하는 엔진 운전 조건에서 고온(HT) 팽창기와 저온(LT) 팽창기의 체적을 고려하면서 고온(HT) 사이클의 팽창비와 저온(LT) 사이클의 응축온도가 시스템의 성능에 미치는 영향을 파악하였다. 본 연구에서는 이러한 이중 회로 랭킨 사이클 시스템에 의해 목표 엔진 운전조건에서 엔진 폐열로부터 약 21%의 추가 동력을 얻을 수 있는 것으로 예측되었다.

승용차용 터보과급기의 저널 베어링 마찰 손실 측정 (Measurement of Journal Bearing Friction Loss of Turbocharger in a Passenger Vehicle)

  • 정진은;전세훈
    • 한국산학기술학회논문지
    • /
    • 제19권7호
    • /
    • pp.9-15
    • /
    • 2018
  • 본 연구에서는 터보과급기의 성능을 저해하는 주요 인자 중 하나인 마찰손실에 대한 연구를 수행하였다. 실제 엔진에서 빈번하게 사용되는 저속 구간에서의 승용차용 터보과급기의 마찰손실 측정 장치를 개발하고, 저속 영역에서 작동하는 터보과급기의 마찰손실을 측정하였다. 플로팅 타입의 승용차용 터보과급기 저널 베어링를 실험 대상으로 선정하였으며, 마찰손실 측정 장치는 구동 모터, 오일 공급 시스템, 마그네틱 커플링으로 구성하였다. 실제 차량의 저속 운전 상황을 모사할 수 있도록 설계, 제작되었고, 터보과급기 회전속도, 오일 온도 및 압력을 실험 변수로 선정하였다. 또한, 마찰손실 측정 장치는 로드 셀을 사용하여 발생하는 마찰 토크를 직접 측정하여 마찰손실을 산출하였으며, 커플링을 통해 구동 모터의 동력을 터보과급기 축에 전달하고, 오일 온도 및 압력을 조절하였다. 오일 압력 3bar와 4bar로 오일을 공급하는 상태에서 오일 온도를 $50^{\circ}C$에서 $100^{\circ}C$까지 $10^{\circ}C$ 간격으로 변화시키면서 터보과급기를 회전수 30,000~90,000rpm으로 작동시켰다. 터보과급기 회전속도 증가할 때 마찰손실은 증가하였으며, 과급기 회전속도의 1.6 승에 비례함을 보였다. 오일 온도가 증가함에 따라 마찰손실은 감소하였으며, 오일 압력이 증가함에 따라 마찰손실은 증가하였다. 따라서 적절한 오일 온도와 압력을 유지하는 것이 필요하다.

DRUM impactor를 이용한 대기 입자상 물질 중 원소성분의 입경분포 특성 : 제주도 고산지역의 2002년 봄철 (3.29-5.30) 측정 연구 (Size Distributions of Trace Elements in Airborn Particulates Collected using Drum impactor at Gosan, Jeju Island : Measurements in Springtime 2002)

  • 한진석;문광주;류성윤;안준영;공부주;홍유덕;김영준
    • 한국대기환경학회지
    • /
    • 제20권4호
    • /
    • pp.555-569
    • /
    • 2004
  • Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn't pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.

승용차용 터보과급기의 저속 영역 마찰 손실 측정 장치 개발 (Development of Friction Loss Measurement Device at Low Speed of Turbocharger in a Passenger Vehicle)

  • 정진은;이상운;전세훈
    • 한국산학기술학회논문지
    • /
    • 제18권1호
    • /
    • pp.585-591
    • /
    • 2017
  • 본 연구에서는 터보과급기의 성능을 저해하는 주요 인자 중 하나인 마찰손실에 대한 연구를 수행하였다. 실제 엔진에서 빈번하게 사용되는 저속 구간에서의 승용차용 터보과급기의 마찰손실 측정 장치를 개발하고, 30,000~90,000rpm의 저속 영역에서 작동하는 터보과급기의 마찰손실을 측정하였다. 플로팅 베어링 타입의 승용차용 터보과급기를 실험 대상으로 선정하였으며, 마찰손실 측정 장치는 구동 모터, 오일 공급 시스템, 커플링으로 구성되었다. 실제 차량의 저속 운전 상황을 모사할 수 있도록 설계, 제작되었고, 회전속도, 오일 온도 및 압력을 실험 변수로 선정하였다. 또한, 마찰손실 측정 장치는 로드셀을 사용하여 발생하는 마찰 토크를 직접 측정하여 마찰손실을 산출하였으며, 마그네틱 커플링을 통해 구동 모터의 동력을 터보과급기 축에 전달하고, 오일 공급 시스템을 오일 온도 및 압력을 조절하였다. 온도 $60^{\circ}C$$90^{\circ}C$, 압력 4bar의 오일을 공급하는 상태에서 터보과급기가 회전수 30,000~90,000rpm으로 작동할 때 터보과급기 회전속도 증가할 때 마찰손실은 증가하며, 대략적으로 과급기 회전속도의 1.4~1.8 지수승에 비례함을 보이고 있다. 또한 오일온도가 $60^{\circ}C$에서 $90^{\circ}C$로 증가할 때 마찰손실은 최소 41%, 최대 63% 감소하였다.