• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.526-535
• /
• 2008

Recently, several MAC protocols using the directional antennas have been proposed for wireless mobile ad hoc networks. In the theory, it can improve spatial reuse and communication throughput in the Mobile Ad-hoc networks. But, or However even though direction transmissions using the Directional MAC protocol(D-MAC) are expected to provide significant improvements, they causes other problems such as deafness problem and fairness problem. In this paper, we analyze the D-MAC protocol in Mobile Ad-hoc network for Vehicle to vehicle(V2V) communication. Through the results of the analysis, We the fundamental problem of D-MAC protocol and finally we suggest new D-MAC protocol for V2V networks.

• Journal of Communications and Networks
• /
• v.6 no.4
• /
• pp.295-306
• /
• 2004

In this paper, a novel air-interface is presented for Fleet-Net1, a self-organizing network for inter-vehicle and vehicle-toroadsidecommunication. The air-interface is based upon the lowchip-rate version of UMTS/TDD. To adapt the cellular UMTS standard to an air-interface for ad hoc networks, changes of the physical layer, medium access control sub-layer and radio resource management are required. An overview of the required modifications is given here. Particularly, a decentralized synchronization mechanism is presented and analyzed by means of simulations. Furthermore, changes for the medium access control are explained in detail, which allow for an efficient operation in partly meshed networks and prioritization. Performance results of the overall system considering throughput and delay are derived by means of analytical evaluations and event-driven simulations. Based on realistic mobility models, it is shown that the presented solution provides a robust communication platform even in vehicular environments. The proposed air-interface is a cost-effective solution not only for inter-vehicle communication, but also for ad hoc networking in general, benefiting from the mass-market of UMTS.

• Convergence Security Journal
• /
• v.21 no.1
• /
• pp.129-135
• /
• 2021

Greedy protocols show good performance in Vehicular Ad-hoc Networks (VANETs) environment in general. But they make longer routes causing by surroundings or turn out routing failures in some cases when there are many traffic signals which generate empty streets temporary, or there is no merge roads after a road divide into two roads. When a node selects the next node simply using the distance to the destination node, the longer route is made by traditional greedy protocols in some cases and sometimes the route ends up routing failure. Most of traditional greedy protocols just take into account the distance to the destination to select a next node. Each node needs to consider not only the distance to the destination node but also the direction to the destination while routing a packet because of geographical environment. The proposed routing scheme considers both of the distance and the direction for forwarding packets to make a stable route. And the protocol can configure as the surrounding environment. We evaluate the performance of the protocol using two mobility models and network simulations. Most of network performances are improved rather than in compared with traditional greedy protocols.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.293-295
• /
• 2009

In an Intelligent Transport System(ITS), data dissemination based on inter-vehicle communication is effective for acquiring real-time traffic-jam information. In this paper, we propose a novel method for traffic jam information dissemination in vehicular ad-hoc networks. In our proposed method, vehicles already trapped in a Traffic-Jam elect leaders according to their locations from upstream and downstream respectively. Then each leader generates traffic data which contains their position, velocity and leader counter respectively, and disseminate the information. {{br}}The implementation of our proposed method is evaluated by means of simulation, and we also present simulation result

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9A
• /
• pp.882-888
• /
• 2010

Vehicular Ad-Hoc Networks (VANETs) using inter-vehicle communication can potentially enhance traffic safety and facilitate many vehicular applications. Therefore, this paper proposes an inter-vehicle routing protocol called Junction-Assisted Routing (JAR) that uses fixed junction nodes to create the routing paths for VANETs in city environments. JAR is a proactive routing protocol that uses the Expected Transmission Count (ETC) for the road segment between two neighbor junctions as the routing paths between junction nodes. Simulation results showed that the proposed JAR protocol could outperform existing routing protocols in terms of the packet delivery ratio and average packet delay.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1223-1236
• /
• 2014

With the extension of wireless technology, vehicular ad hoc networks provide important services for the dissemination of general data and emergency warnings. However, since, the vehicle topology frequently changes from a dense to a sparse network depending on the speed of the moving vehicles and the time of day, vehicular ad hoc networks require a protocol that can facilitate the efficient and reliable dissemination of emergency messages in a highly mobile environment under dense or intermittent vehicular connectivity. Therefore, this paper proposes a new vehicular broadcast protocol, called BL-CAST, that can operate effectively in both dense and sparse network scenarios. As a low overhead multi-hop broadcast protocol, BL-CAST does not rely on the periodic exchange of beacons for updating location information. Instead, the location information of a vehicle is included in a broadcast message to identify the last rebroadcasting vehicle in an intermittently connected network. Simulation results show that BL-CAST outperforms the DV-CAST protocol in terms of the end-to-end delay, message delivery ratio and network overhead.

• International Journal of Computer Science & Network Security
• /
• v.22 no.2
• /
• pp.167-174
• /
• 2022

Vehicular Ad hoc Networks are considered as special kind of Mobile Ad Hoc Networks. VANETs are a new emerging recently developed, advanced technology that allows a wide set of applications related to providing more safety on roads, more convenience for passengers, self-driven vehicles, and intelligent transportation systems (ITS). Delay Tolerant Networks (DTN) are networks that allow communication in the event of connection problems, such as delays, intermittent connections, high error rates, and so on. Moreover, these are used in areas that may not have end-to-end connectivity. The expansion from DTN to VANET resulted in Vehicle Delay Tolerant Networks (VDTN). In this approach, a vehicle stores and carries a message in its buffer, and when the opportunity arises, it forwards the message to another node. Carry-store-forward mechanisms, packets in VDTNs can be delivered to the destination without clear connection between the transmitter and the receiver. The primary goals of routing protocols in VDTNs is to maximize the probability of delivery ratio to the destination node, while minimizing the total end-to-end delay. DTNs are used in a variety of operating environments, including those that are subject to failures and interruptions, and those with high delay, such as vehicle ad hoc networks (VANETs). This paper discusses DTN routing protocols belonging to unicast delay tolerant position based. The comparison was implemented using the NS2 simulator. Simulation of the three DTN routing protocols GeOpps, GeoSpray, and MaxProp is recorded, and the results are presented.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.2
• /
• pp.9-16
• /
• 2022

The nodes constituting the vehicle ad hoc network (VANET) are vehicles moving along the road and road side units (RSUs) installed around the road. The vehicle ad hoc network is used to collect the status, speed, and location information of vehicles driving on the road, and to communicate with vehicles, vehicles, and RSUs. Today, as the number of vehicles continues to increase, urban roads are suffering from traffic jams, which cause various problems such as time, fuel, and the environment. In this paper, we propose a method to solve traffic congestion problems on urban roads and demonstrate that the method can be applied to solve traffic congestion problems through performance evaluation using two typical protocols of vehicle ad hoc networks, AODV and GPSR. The performance evaluation used ns-2 simulator, and the average number of traffic jams and the waiting time due to the average traffic congestion were measured. Through this, we demonstrate that the vehicle ad hoc-based traffic congestion management technique proposed in this paper can be applied to urban roads in smart cities.

• International Journal of Computer Science & Network Security
• /
• v.21 no.1
• /
• pp.207-213
• /
• 2021

Networks in Mobile ad hoc contain distribution and do not have a predefined structure which practically means that network modes can play the role of being clients or servers. The routing protocols used in mobile Ad-hoc networks (MANETs) are characterized by limited bandwidth, mobility, limited power supply, and routing protocols. Hybrid routing protocols solve the delay problem of reactive routing protocols and the routing overhead of proactive routing protocols. The Ant Colony Optimization (ACO) algorithm is used to solve other real-life problems such as the travelling salesman problem, capacity planning, and the vehicle routing challenge. Bio-inspired methods have probed lethal in helping to solve the problem domains in these networks. Hybrid routing protocols combine the distance vector routing protocol (DVRP) and the link-state routing protocol (LSRP) to solve the routing problem.

• Information and Communications Magazine
• /
• v.29 no.8
• /
• pp.72-84
• /
• 2012

This paper introduces three vehicle trajectory-based data forwarding schemes, tailored for vehicular ad hoc networks. Nowadays GPS-based navigation systems are popularly used for providing efficient driving paths for drivers. With the driving paths called vehicle trajectories, we can make data forwarding schemes more efficient, considering the micro-scoped mobility of individual vehicles in road networks as well as the macro-scoped mobility of vehicular traffic statistics. This paper shows why the vehicle trajectory is a key ingredient in the design of the vehicle-to-infrastructure, infrastructure-to-vehicle, and vehicle-to-vehicle data forwarding schemes over multihop. Through the mathematical formulation, the key design techniques are shown for three forwarding schemes based on vehicle trajectory, compared with a state-of- the- art data forwarding scheme based on only vehicular traffic statistics.