• Horticultural Science & Technology
• /
• v.33 no.6
• /
• pp.820-828
• /
• 2015

This study was carried out to determine the effects of vernalization, temperature, and soil water deficit (SD) on mesophyll cells, growth, and yield of Chinese cabbage (Brassica campestris L). The palisade parenchyma and spongy tissues of Chinese cabbage were observed under full irrigation and two weeks of SD treatment. These cells were severely collapsed by four weeks SD treatment. The SD treatment had the greatest influence on the growth of Chinese cabbage among the tested treatment factors (vernalization, temperature, and SD), growth significantly decreased by severe drought treatment (four weeks SD treatment). In addition, the relative growth rate, unit leaf rate, leaf area ratio, specific leaf area, and leaf weight ratio were significantly affected by SD treatment; however, other individual factors and their combined treatments did not influence the analyzed growth parameters. The yield under vernalization after high temperature and full irrigation treatments was 3,056 kg/10 a, which was the greatest among all the tested treatments, while four-week SD treatment significantly reduced the yield. Head formation of Chinese cabbage was not altered under SD treatment, and vernalization treatments did not induce bolting. Our results indicated that collapsing mesophyll cells and reduced growth and yield were induced by SD treatment. Thus we suggest that optimal irrigation system should be install to avoid or overcome crippling drought conditions in the open field.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.7
• /
• pp.879-884
• /
• 2009

Allium tuberosum Rotter (Liliaceae, Chinese chives) is a perennial herb of which leaves are used for food. This study investigated the effect of pretreatment on quality of dehydrated Chinese chives. Chinese chives was blanched at $80^{\circ}C$ for 20 sec, followed by drying at $70^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$, or drying at $100^{\circ}C$ for 30 min and subsequent drying at $70^{\circ}C$, or $100^{\circ}C$ for 60 min and subsequent drying at $70^{\circ}C$. Optimum drying temperature and time was $100^{\circ}C$ for 30 min and subsequent drying at $70^{\circ}C$, or $100^{\circ}C$ for 60 min and subsequent drying at $70^{\circ}C$. These conditions were shortened time for dehydration and showed smaller decrease than others in Hunter color L, a, b. Dehydrated Chinese chives showed a constant decrease in greenness with storage, probably due to destruction of chlorophyll by light. In the measurement of Hunter color L, a, b, these conditions showed smaller decrease than others in Hunter color for 15 week storage. Chlorophyll content and SOD (superoxide dismutase)-like activity in that condition was higher than others. It was assumed that a phenolic compound that forms its thermostable activity. The fitness of drying models was conducted in order to explain reducing chlorophyll loss and SOD (superoxide dismutase)-like activity loss. Based upon the chlorophyll content, SOD-like activity, and retention of green color of the vegetable, optimum drying conditions was $100^{\circ}C$ for 30 min followed by $100^{\circ}C$ for 30 min and subsequent drying at $70^{\circ}C$, or $100^{\circ}C$ for 60 min and subsequent drying at $70^{\circ}C$.

• Journal of Power System Engineering
• /
• v.8 no.2
• /
• pp.18-23
• /
• 2004

Recently many researchers have been studying the development of alternative energy due to serious environmental pollution and drying up fossil energy. Among various alternative fuels, authors investigated the physical and combustion characteristics of the bio diesel fuel(BDF) which was made from the wasted vegetable oil. In this study, PXI and LabVIEW, which is a novel measuring instrument and online analysis, was used to investigate the combustion characteristics of BDF in a DI diesel engine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.294-301
• /
• 2017

In this study, we found the optimal manufacturing conditions of livestock manure sludge RDF with the oil-drying method. We performed oil evaporation, oil drying and pelletizing of the sludge to evaluate the value of the product (sludge RDF), and measured the performance of the product using calorimeter and PXRF equipment. Also, we conducted the calorie comparison test between sludge RDF manufactured in this study and wood RDF generally used in the field. Experimental results showed that 30g of the sludge treated by vegetable oil at $130^{\circ}C$ for 25 minutes were the optimal conditions to make the sludge RDF (considering the aspects of eco-friendly and mass production). The caloric value of the sludge RDF manufactured in this study was 5211kcal/kg which is higher than that of wood RDF used widely in the market. Finally, PXRF results showed sludge RDF contains no heavy metals with the exception of sulfur. Therefore, we recommend more study about the sulfur control process for future development of the industrial manufacturing process.

• Journal of the East Asian Society of Dietary Life
• /
• v.3 no.1
• /
• pp.12-17
• /
• 1993

This book is named 'The Ryuk-Jab-Rok' because it was written in the last page of 1820's almanac. This book is written purely in Korean and has not been published yet. This book comprises twenty eight items, among which there are eight items of vegetable preserving method, ten items of Jook preparation methods(a kind of cereal soup), nine items of Pyun-Myun methods(a kind of rice cakes and noodles) and Yak-Bab(a kind of spiced rice). In vegetable preserving method, the eggplant, the cucumber and a songi mushroom were preserved with the drying method., A radish, a sorojangii, and the root of white cabbage were used with the cold temperature preservation. A garlic was dried after salting. The sprouts of DooRub, which were coming in the hot room, were used. In the Jook preparations, there were five animal materials which were lamb, chick, crudian, oyster and abalone. In nine Pyun-Myun methods, Jap-Gua-Sil was illegible because the letters were not clear. Among eight items, the stick rice was used in four cases, the regular rice in two cases. The ground pine nuts, honey and the Chinese date were used most ofter. And the sesame salt and the chestnut were next. The analysis of the terms I this book revealed that 26 items were used for cooking processes. And it also showed us that there were seven kind of cutting procedure and eight kinds of heating procedure. The shapes and size of foods were revealed at only three places in all items. The one-chi(chi ; abut three cm) and three-Ja(Ja ; about thirty cm) which the terms represent the length were revealed twice and once respectively in this book. In the taste description, 'the good', the most common word, was used in seven times, and which was the most frequently introduce case. The measuring unit is hard to revive since the measurements were taken by the container, which were Jong-Ja, Sabal and Tang-gii, then in use. Fifteen kinds of containers and cookers were used for preparing foods. And all of them are now I use.

• Culinary science and hospitality research
• /
• v.13 no.2
• /
• pp.1-11
• /
• 2007

The process of Cheonggukjang powderization and application to the western food recipes were established. Cheonggukjang was made and processed into the powder. The optimum condition of Cheonggukjang solution for the powdering process was 50%(w/w). And it was completely grinded by a mixer. Drying condition of a spray dryer was to be injected 1 mL/sec. in $105^{\circ}C$ with 3,000 rpm. The components of Cheonggukjang were 49.7 g/100 g of moisture, 2.6 g/100 g of crude ash, 16.2 g/100 g of crude carbohydrate, 23.4 g/100 g of crude protein, 8.1 g/100 g of crude fat, and 9.3 g/100 g of cellulose. The major amino acid was glutamic acid and its quantity was 4,345.5 mg/100 g. And the next were aspartic acid (2,539.2 mg/100 g) and leucin (1,963.2 mg/100 g). In application, 4 kinds of soup recipes using Cheonggukjang powder were developed. The sensory test showed the acceptability between the soup with the powder and the soup without the powder was significant at odor(p<0.05) in vegetable cream soup and broccoli soup, and at taste(p<0.01) in vegetable cream soup. And the soup with non powder showed more acceptability.

• Research in Plant Disease
• /
• v.7 no.1
• /
• pp.42-48
• /
• 2001

The effect of cultural, physical and chemical control methods on the population density of Meloidogyne arenaria second-stage juveniles (J2) and on fruit yields of oriental melon was investigated at Seongju Fruit Vegetable Experiments Station, Kyungpook province, Korea, for two years from 1999 to 2000. Crops used in a rotation prior to Oriental melon were rice, corn, sesame, and green onion. The physical methods used were either solarization, soil addition or soil drying, and a nematicide, fosthiazate of granular formula, was used as the chemical method, applying at a rate of 300g a. i./10 a. Growing rice in the rotation, solarization, and soil addition controlled the nematode disease most effectively, reducing the number of J2 by 90% and increasing fruit yields two times. However, the effects of these control methods on the J2 population were limited to the early growing season; the J2 population increased later, suggesting that additional control practices may be needed in the following season. The next effective control methods were use of corn in the rotation, the nematicide application, and soil drying. The nematicide application was effective only for the early fruit yield, but neither for the late nor for the total yields. Use of sesame or green onion in the rotation was not effective in controlling the nematode.

• Journal of the Korean Society of Costume
• /
• v.58 no.8
• /
• pp.63-73
• /
• 2008

From the ancient Korea to the late Joseon Korean fur and leather had been preferred in and out of Korea for their good quality and excellent manufacturing skill. Since Unified Silla (A.D.676${\sim}$A.D.936) Korean fur and leather were manufactured divisionally by workmen specialized in materials and products, and such manufacturing process was succeeded to Goryeo and Joseon. Manufacturing of fur and leather was consisted of as follows: hunting and butchering - peeling - beating with a paddle and removing fat - oil manufacturing - drying - tanning, then cutting and sewing, and there was a special caring method. In order to make good fur and leather, each process of manufacturing needed particular techniques and all available methods were tried to have tender fur and leather by using smoking, excrement, lime, vegetable tannin and even cerebral liquid. And also required mouth-chewing and hand-pounding with a lot of time and of labor Keeping furs resilience and flexibility, sowing several skins together, even when the after-all-process skin was converted into clothes, was much more difficult than sewing fabric. Thus, the manufacturing cost was as much expensive as skin materials, and the volume of manufacturing of fur and leather was also limited. Therefore, fur and leather must have been popular for scarcity value in the manufacturing process, and this scarcity must have caused an extreme luxury of fur.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.745-751
• /
• 2002

Several bacterial strains producing biosurfactants were isolated from polluted marine and soil by oil. One of the strains named LSC11 showed strong production activity of biosurfactants. This strain was identified as a Bacillus sp. LSC11 based on the morphological, biochemical, and physiological characteristics. The biosurfactant, produced by the strain, emulsified crude oil, vegetable oil, and hydrocarbons. The surface tension of the culture broth of Bacillus sp. LSC11 decreased to 32 mN/m. The crude biosurfactant was obtained from the culture broth by acid precipitation, freeze drying, solvent extraction, and evaporation. The emulsifying activity of the biosurfactant showed better than the chemically synthesized surfactant (SDS, Span40, Span 85). The biosurfactants had strong properties as an emulsifying agent and as an emulsion-stabilizing agent.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.102-108
• /
• 2019

Pericarp thickness of vegetable corns such as sweet and waxy corn is one of the crucial traits, contributing to their edible quality. This study was carried out to compare the pericarp thickness of super sweet and waxy corn hybrids measured with kernel samples prepared using different methods at different grain filling periods. The samples comprised excised pericarp from dried, frozen (at $-4^{\circ}C$), and fresh kernels. Analysis of variance performed separately on super sweet and waxy corn hybrids indicated a significant three-way interaction among cultivars, kernel sample preparation methods, and days after pollination (DAP). Dried samples of super sweet corn hybrids presented reasonably stable pericarp thickness measurements during grain filling, while all the sample preparation methods fluctuated less as grains of waxy corn hybrids matured. Waxy corn is best consumed at around 24 days after pollination. Pericarp thickness of waxy kernel samples regardless of preparation methods investigated was the same at 24 DAP with a few exceptions. Overall, the common method of drying kernel samples before pericarp excision can provide reliable data for estimating the tenderness of vegetable corn hybrids.