• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.46-55
• /
• 1996

As industrial standard data, the STL format which approximates three dimensional CAD model to triangular facets, is used for RP(Rapid Prototyping) system in recent days. Because most RP system take the only form of two dimensional line segments as an input stream inspite of its imperfectness while converting into STL format, a CAD model is converted into a standard industrial format which is composed of many triangular facets. The error verifying process is composed of four main steps, and these are 1) Remove facets with two or more vertices equal to each other. 2) Fix overlapping error such as more than three facets adjacent to anedge. 3) Fill holes in the mesh by using Delaunay triangulation method. 4) Correct the wrong direction and normal vectors. This paper is concerned with serching the mentioned errors in advance and modifying them.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.4
• /
• pp.309-318
• /
• 2010

This paper presents a simulation model based on support vector regression (SVR) for flicker estimation emitted from the wind turbines. For the SVR training, the voltage variation and flicker level are selected as input and output, respectively. Through the off-line training, the relationship between the voltage variation and flicker level is derived. The required amount of data for the flicker measurement is decreased and its proessing time is also reduced. The simulation and experiment results have shown that the flicker estimation is performed accurately.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.170-177
• /
• 1993

In robotic arc welding, the roll (rotation) of the torch about its direction vector does not have any effect on the welding operation. Thus we could use this redundant degree of greedom for the motion control of the robot manipulator. This paper presents an algorithm for the pseudo- inverse kinematic motion control of the 6-axis robot, which utilizes the above mentioned redunancy. The prototype welding operation and the tool path are also graphically simulated. Since the proposed algorithm requires only the position and normal vector of the weldine as an input data, it is useful for the CAD-based off-line programming of the arc welding robot. In addition, it also has the advantages of the redundant manipulator motion control, like singularity avoidance and collision free motion planning, when compared with the other motion control method based on the direct inverse kinematics.

• Journal of Information Processing Systems
• /
• v.19 no.4
• /
• pp.540-553
• /
• 2023

The hollow letter CAPTCHA (Completely Automated Public Turing test to tell Computers and Humans Apart) is an optimized version of solid CAPTCHA, specifically designed to weaken characteristic information and increase the difficulty of machine recognition. Although convolutional neural networks can solve CAPTCHA in a single step, a good attack result heavily relies on sufficient training data. To address this challenge, we propose a seed filling algorithm that converts hollow characters to solid ones after contour line restoration and applies three rounds of detection to remove noise background by eliminating noise blocks. Subsequently, we utilize a support vector machine to construct a feature vector for recognition. Security analysis and experiments show the effectiveness of this algorithm during the pre-processing stage, providing favorable conditions for subsequent recognition tasks and enhancing the accuracy of recognition for hollow CAPTCHA.

• Korean Journal of Animal Reproduction
• /
• v.27 no.1
• /
• pp.15-23
• /
• 2003

Lactadherin (formerly known as BA46), a major glycoprotein of the human milk fat globule membrane, is abundant in human breast milk and breast carcinomas and may prevent symptomatic rotavirus infections. In this study, under the control of tissue specific and hormonal inducible mouse whey acidic protein (WAP) promote., the expression pattern of lactadherin (Ltd) in lactogenic hormone-dependent mouse mammary epithelial cell line HC11 were tested. pLNWLtd construct containing 2.4 kilobases of the WAP promoter and 1.5 kilobases of human lactadherin gene was stably transfered into HC11 cells using retroviral vector system. Integration and expression level of the transgene was estimated using PCR and RT-PCR, respectively. Prominent induction of Ltd gene under the WAP promoter was accomplished in the presence of insulin, hydrocortisone and prolactin. Compared to the control (cells cultured with insulin alone), however we observed that the WAP promoter was leaky. These data indicate that luther studies are needed in finding an appropriate promoter other than WAP promoter because of its leakiness.

• The KIPS Transactions:PartD
• /
• v.14D no.7
• /
• pp.801-808
• /
• 2007

Video coding standards such as MPEG-2, MPEG-4, H.263, and H.264 transmit a compressed video data using wired/wireless communication line with limited bandwidth. Because highly compressed bit-streams is likely to fragile to error from channel noise, video is damaged by error. There have been many research works on error concealment techniques, which recover transmission errors at decoder side [1, 2]. We designed an error concealment technique for lost motion vectors of H.264 video coding. In this paper, we propose a Kalman filter based motion vector recovery scheme, and experimented with standard video sequences. The experimental results show that our scheme restores original motion vector with more precision of 0.91 - 1.12 on average over conventional H.264 decoding with no error recovery.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.62-68
• /
• 2002

It is well known that the MDVR beamforming outperforms the conventional delay-sum beamformer in the sense of noise rejection and bearing resolution. However, the MDVR method requires long observation time to achieve high frequency resolution. The STMV method uses the steered covariance matrix of sensor data, so it has an ability to form an adaptive weight vector from a single time-series snapshot. But it uses the same weight vector across all frequencies. In this paper, we propose an SSMV method. The basic idea of the SSMV method is to decompose a full frequency band into several subbands to acquire a weight vector for each subband, individually. Also the wrap may be divided into several subarrays in order to reduce a computational load and the bandwidth of each subband. Simulations using real sea trial data show that the proposed SSMV method has good performance with short observation time.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.231-236
• /
• 2000

In order to predict depth of the pile forward modeling and inversion of magnetic logging data was conducted by using a finite line of dipoles model. The horizontal component as well as the vertical component of magnetic fields can be measured in the borehole, and the magnetic anomalies can be obtained by subtracting the Earth's magnetic field from the measurement. The magnetic anomalies of the pile are considered as vector sum of induced magnetization due to the Earth's magnetic field and remnant magnetization possessed by steel strings in the pile. The magnetic anomalies are used as input data for inversion from which the length, the magnetic moment per unit length, and the dip angle of the pile can be obtained. From the inversion of synthetic noisy data, and the data obtained from the field model test it is found that the driving depth of the pile can be determined as close to the order of measuring interval (5∼10㎝). It is also found that the resultant magnetic anomalies due to an individual steel string in the pile are almost same as those due to a group of steel strings located at the center of the pile. The magnetic logging method also can be used for locating reinforced bars, pipes, and steel casings.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.69.1-69.1
• /
• 2014

We perform an MHD simulation combined with observed vector field data to clarify an eruptive dynamics in the solar flare. We first extrapolate a 3D coronal magnetic field under a Nonlinear Force-Free Field (NLFFF) approximation based on the vector field, and then we perform an MHD simulation where the NLFFF prior to the flare is set as an initial condition. Vector field was obtained by the Soar Dynamics Observatory (SDO) at 00:00 UT on February 15, which is about 90 minutes before the X2.2-class flare. As a result, the MHD simulation successfully shows an eruption of strongly twisted lines whose values are over one-turn twist, which are produced through the tether-cut magnetic reconnection in strongly twisted lines of the NLFFF. Eventually, we found that they exceed a critical height at which the flux tube becomes unstable to the torus instability determining the condition that whether a flux tube might escape from the overlying field lines or not. In addition to these, we found that the distribution of the observed two-ribbon flares is similar to the spatial variance of the footpoints caused by the reconnection of the twisted lines being resided above the polarity inversion line. Furthermore, because the post flare loops obtained from MHD simulation well capture that in EUV image taken by SDO, these results support the reliability of our simulation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.227-238
• /
• 2006

Line density index(LDI) was developed to quantify a densely isothermal line rate as standard index in the ocean environment. Theoretical background on the LDI development process restricting index range 0 to 100 was described. And validation test was done for the LDI application condition that total line length is not greater than 1/10 of unit area. NOAA SST(Sea Surface Temperature) data were used for the experimental application of LDI in the South Sea of Korea. Using GIS, $0.1^{\circ}C$ isothermal lines were linearized as vector data form SST raster data, and unit area were built as polygon data. For the LDI calculation, spatial overlapping(line in polygon) was implemented. To analyze the effect of unit area size for the LDI distribution, two cases of unit area size were designed and descriptive statistics was calculated including performing normality test. The results showed no change of LDI's essential characteristics such as mean and normality except for the range of value, variance and standard deviation. Accordingly, it was found that complex structure of thermal front and even smaller scale of front width than unit area size could influence on the LDI distribution. Also, correlation analysis performed between LDI and difference of temperature(${\Delta}T^{\circ}C$), and horizontal thermal gradient(${\Delta}T^{\circ}C/km$) on the front was obtained from linear regression model. This obtained value was compared with the results from previous researches. Newly developed LDI can be used to compare the thermal front regions changing spatio-temporally in the ocean environment using absolute index value. It is considered to be significant to analyze the relationship between thermal front and marine environment or front and marine organisms in a quantitative approach described in this study.