• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.131-143
• /
• 1994

For maintenance of exposed implant in healthy state, it is necessary to treat the surface of implant fixture and provide the surface adjustable to surrounding tissues. Variable techniques have been introduced such as citric acid and air-abrasive system to treat the failed implant. Although when the rough surface of HA coated implant was exposed to oral environment, the surface treatment method with citric acid or air-abrasive system is effective for removal of bacterial endotoxin, it is unsuccessful to prevent plaque deposition due to difficulty in removal of rough surface of HA coated implant. Thus, in this study the method that removes bacterial endotoxin and makes smooch surface without alteration of surface characteristics was studied. HA coated disc manufactured by IMZ Co. Was treated with high speed diamond bur, low speed diamond bur, stone bur, rubber point, jetpolisher. And then its surface state was examined with profilometer and SEM to evaluate the surface smoothness, and its surface component was analyzed with EDX to evaluate wheter the surface characteristics were altered or not. As a result, following results were obtained. When the surface roughness of each implant disc was measured by profilometer, the group I showed a $R_{max}\;2.11{\mu}m$ and the group II, III, IV, V showed a $R_{max2}\;4.17{\mu}m$, $7.28{\mu}m$, $8.61{\mu}m$ and $39.44{\mu}m$ respectively. That is, surface smoothness was highest in the group I and it has been gradually decreased in the group II, III, IV and V. Under the SEM examination, the group I showed relatively smooth surface and the group II showed slightly rougher surface than the group I due to partially remaining HA particles while most HA particle was removed. The group III and IV showed rough topography due to HA particles that was not grinded, and HA coated surface in group V showed very irregular surface with deep groove and prominence. In cross-sectional view, the group I showed uniform surface, and the group III, IV showed rough surface due to remaining HA particles but the thickness of HA coating was remarkably reduced. The group II has similar pattern in group I, and the group V showed about $40{\mu}m$ thickness although it was not constant. By analysis of surface component with EDX, the group II in which the grinding was effective showed a small quantity of calcium and phosphorous and the group III, IV, in which the grinding was incomplete showed calcium and phosphorus peak. In all experimental group, no other than titanium, aluminum, calcium, phosphorus was observed.

• Journal of Radiation Protection and Research
• /
• v.39 no.4
• /
• pp.199-205
• /
• 2014

In the field of neutron detections, $^3He$ gas, the so-called "the gold standard," is the most widely used material for neutron detections because of its high efficiency in neutron capturing. However, from variable causes since early 2009, $^3He$ is being depleted, which has maintained an upward pressure on its cost. For this reason, the demands for $^3He$ replacements are rising sharply. Research into neutron converting materials, which has not been used well due to a neutron detection efficiency lower than the efficiency of $^3He$, although it can be chosen for use in a neutron detector, has been highlighted again. $^{10}B$, which is one of the $^3He$ replacements, such as $BF_3$, $^6Li$, $^{10}B$, $Gd_2O_2S$, is being researched by various detector development groups owing to a number of advantages such as easy gamma-ray discrimination, non-toxicity, low cost, etc. One of the possible techniques for the detection is an indirect neutron detection method measuring secondary radiation generated by interactions between neutrons and $^{10}B$. Because of the mean free path of alpha particle from interactions that are very short in a solid material, the thickness of $^{10}B$ should be thin. Therefore, to increase the neutron detection efficiency, it is important to make a $^{10}B$ thin film. In this study, we fabricated a $^{10}B$ thin film that is about 60 um in thickness for neutron detection using well-known technology for the manufacturing of a thin electrode for use in lithium ion batteries. In addition, by performing simple physical tests on the conductivity, dispersion, adhesion, and flexibility, we confirmed that the physical characteristics of the fabricated $^{10}B$ thin film are good. Using the fabricated $^{10}B$ thin film, we made a proportional counter for neutron monitoring and measured the neutron pulse height spectrum at a neutron facility at KAERI. Furthermore, we calculated using the Monte Carlo simulation the change of neutron detection efficiency according to the number of thin film layers. In conclusion, we suggest a fabrication method of a $^{10}B$ thin film using the technology used in making a thin electrode of lithium ion batteries and made the $^{10}B$ thin film for neutron detection using suggested method.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.5
• /
• pp.504-509
• /
• 2005

Background : Endobronchial tumors cause life-threatening dyspnea and can lower the quality of life due to central airway obstruction. In those cases with an intraluminal tumor, various bronchoscopic techniques are available for tumor debulking. The therapeutic effect of bronchoscopic electrocautery for palliation in patients with a symptomatic tumor obstruction was studied. Method : Nineteen patients with bronchogenic carcinomas (n=15) and metastatic tumors affecting the bronchi (n=4), between March 2002 and March 2005, were enrolled in this study. Electrocautery was performed under local anesthesia using an electroprobe and diathermic snare. Using flexible bronchoscopy, a follow-up bronchoscopic examination was performed 3-4 days later. Symptom improvement was evaluated by $FEV_1$, FVC and dyspnea score (Modified Borg Category Scale (0~10)), both before and after the electrocautery. Results : The success rate of electrocautery on the follow up examination was 84%. Patients with endoluminal airway lesions had a mean overall decrease in the size of the obstruction to $47.8{\pm}15.7%$. The mean Improvement in the dyspnea score immediately after the endobronchial tumor debulking was $2.78{\pm}1.42$. The average improvements in the $FEV_1$ and FVC after electrocautery were $0.32{\pm}0.19L$ and $0.5{\pm}0.22L$, respectively. There were 2 cases of complications related with electrocautery (one each of pneumothorax and pneumonia). Conclusion : Electrocautery using an electroprobe and diathermic snare was an effective and safe palliative treatment for a symptomatic endoluminal airway obstruction in lung cancer.

• Radiation Oncology Journal
• /
• v.22 no.2
• /
• pp.91-97
• /
• 2004

Propose: To Analyze the survival outcomes and prognostic factors In glioblastoma patients treated with surgery and radiation therapy. Materials and Methods : One hundred twenty glloblastoma patients treated with postoperative radiation therapy from 1994 to 2003 at Samsung Medical Center were retrospectively reviewed. Surgical extents were gross total resection in 22 patients (18$\%$), subtotal resection in 69 (58$\%$), and biopsy only in 29 (24$\%$). The median radiation dose was 50 Gy, ranging from 45 Gy to 72 Gy The median follow-up period was 12 months ranging from 2 to 52 months. Results The overall 1- and 2-year survival rates were 52$\%$ and 14$\%$, respectively, and the median survival duration was 13 months. Favorable prognostic factors by Uunivarlate analyses of prognostic factors on 1-year survival rate were revealed that age under 50 (p<0.01), ECOG performance status 0 or 1 (p=0.03), single lesion (p=0.02), and gross total resection (p=0.04), were the favorable prognostic (actors. and by Mmultlvarlate analyses were revealed that female (p<0.01), age under 50 (p<0.01), ECOG performance status 0 or 1 (p=0.05) and gross total resection (p=0.05) were the favorable prognostic factors. Conclusions : The results of our study were comparable with those previously reported. To Improve treatment outcome, various modifications, Including radiation dose escalation through newer radiation therapy techniques and use of effective chemotherapy regimen, should be further Investigated. Investigated. Also Furthermore, the application of Individualized treatment strategy based on 4he patient's prognostic factors might be needed.

• Korean Journal of Agricultural Science
• /
• v.3 no.1
• /
• pp.121-134
• /
• 1976

There are many evidences that vaiious plant pathogenes were introduced with imported plants and agricultural productsrfrom foreign countries and caused heavy losses of domestic economic plants, ever since the early twentieth century when our country began to trade plants and agricultural products with foreign countries. There are many ways that foreign plant pathogenes have been introduced into our country, but the main route is considered to be imported plants and agricultural products contaminated with plant pathogenes. Plant quarantine which prevent effectively introduction of plant pathogenes from abroad was practiced for the first time in our country in 1912, and that is relatively earlier activity in the history of plant quarantine of the world. Several plant pathogenes have been introduced into our country even after plant quarantine had been practiced. Particularly for about 15 years, from the 2nd World War to 1961 when the law of Plant Protection was enacted and practical works of plant quarantine was reoperated, Korean agriculture was opened to various foreign plant pathogenes as a lapse period of plant quarantine in our country. Introduced plant pathogenes are, for the most part, from Japan because of depending upon Japan in the foreign trade of plants and agricultural products of our country. As present plant quarantine is required more exactness and rapidness, reasonable organization of quarantine system including more trained quarantine specialists, modernized facilities and introduction of improved quarantine techniques are necessary. Reasonable organization and improvement of plant quarantine system are important not only for protection of korean agriculture to plant pathogenes possible to be introduced from foreing countries, but also for increasing and stabilization of export of plants and agricultural product of our country.

• Journal of Chest Surgery
• /
• v.36 no.11
• /
• pp.812-819
• /
• 2003

Background: Left ventricular dysfunction is one of the important prognostic factors of early mortality and long-term survival after valve operation. We studied the intermediate term results of mitral valve reconstruction in patients with moderate to severe left ventricular dysfunction. Material and Method: Forty four patients who underwent mitral valve reconstruction with a left ventricular ejection fraction (EF) of <45% or less (20∼45%) from April 1995 through July 2001 were reviewed retrospectively. Ages ranged from 10 to 67 years (46∼14 years) and 32 patients were in NYHA class III-IV. The mitral valve diseases were regurgitation (MR) in 28 patients, stenosis(MS) in 10, and mixed lesion in 5. The etiologies of mitral valve disease were rheumatic in 20 patients, degenerative in 14, ischemic in 5, annular dilatation in 2, congenital in 2, and endocarditis in 1. Operatively, all patients had annuloplasty and/or various valvuloplasty techniques, and a total of 52 procedures were concomitantly performed. Total cardiopulmonary bypass and aortic crossclamp time were 160$\pm$57 minutes and 112$\pm$45 minutes respectively. Result: Two operative deaths occurred as a result of left ventricular failure (4.5%). After the mean follow-up of 39 months (range, 10∼83 months), there was no late death. Transthoracic echocardiography revealed no or grade I of MR in 29 patients (72.5%) and no or mild MS in 35 patients (87.5%). The actuarial survival at 5 years was 100%. Four patients required mitral valve replacement due to progressive mitral valvular disease. The actuarial freedom from valve-related reoperation at 5 years was 84$\pm$9%. Conclusion: This study suggests that mitral valve reconstruction in patients with moderate to severe left ventricular dysfunction offers good early and intermediate survival and acceptable freedom from valve-related reoperation, and it is the strategy for effective management for these patients.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.272-279
• /
• 2015

This study was conducted to provide baseline data which could suggest a direction of role based efficient integrated clinical education by avoiding duplicate of contents through analyzing clinical courses. Among the 7 clinical courses, orthodontics and periodontology were the most published subjects which were published in 5 kinds of books and dental materials was the least published subject which was published in 2 kinds of books on investigation of overlapping contents based on titles that appeared on chapters and verses of all textbooks for clinical courses. Dental implant was covered in 4 subjects such as oral maxillofacial surgery, prosthodontics, periodontology and dental materials which was the most number. Other overlapping contents were restoration treatment, occlusion and malocclusion, temporomandibular joint diseases, anesthesia sedation, tooth trauma, systemic disease and dental treatment, dental casting, isolation techniques, tooth bleaching, pulp protection, gingivitis periodontitis, tooth development, etc. Reviews of textbooks of clinical courses should be conducted in a detailed manner by systematic, various studies in order to improve quality of the textbooks.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.76-85
• /
• 2003

In this study, we write down the definitions, their causes and the techniques of analysis as a theoretical consideration of common cause failures, and investigate the limitation and the importance of the common cause failures by applying to the analysis on the fire protection as a representative safety facility. As you can know in the reliability analysis, most impressive cause is the malfunctions of pumping operations; especially the common cause failure of two pumps is dominant. In other words, it is possible to assess system-reliability as twice as actual without CCF From these, CCF is extraordinarily important and the results are highly dependent on the CCF factor. And although it would increase with multiple installations, the reliability are not defined as linear with those multiplications. In addition, the differences in results due to the models for analysis are not significant, whereas the various sources of data produce highly different results. Therefore, we conclude that the reliabilities are dependent on the quality of the usable data much better than the variety of models. As a result, the basic and engineering device for the preventions of CCF of the multiple facilities is to design it as reliably as to design the fire-water pump. That is to say, we must assess those reliabilities using PFD whether they are appropriate to SIL (Safety Integrity Level) which is required for the reliability in SIS (Safety Instrumented System). The result of the analysis on the reliability of the fire-water supply with CCF shows that PFD is 3.80E-3, so that it cannot be said to be designed as safely as in the level of SIL5. However, without CCF, PFD is 1.82E-3 which means that they are designed as unsafely as before.

• Journal of Korea Water Resources Association
• /
• v.46 no.8
• /
• pp.821-831
• /
• 2013

Recently image velocimetries, including particle image velocimetry (PIV) and surface image velocimetry (SIV), are often used to measure flow velocities in laboratories and rivers. The most difficult point in using image velocimetries may be how to determine the sizes of the interrogation areas and the measurement uncertainties. Especially, it is a little hard for unskilled users to use these instruments, since any standardized measuring techniques or measurement uncertainties are not well evaluated. Sometimes the user's skill and understanding on the instruments may make a wide gap between velocity measurement results. The present study aims to evaluate image velocimetry's uncertainties due to the changes in the sizes of interrogation areas and searching areas with the error analyses. For the purpose, we generated 12 series of artificial images with known velocity fields and various numbers and sizes of particles. The analysis results showed that the accuracy of velocity measurements of the image velocimetry was significantly affected by the change of the size of interrogation area. Generally speaking, the error was reduced as the size of interrogation areas became small. For the same sizes of interrogation areas, the larger particle sizes and the larger number of particles resulted smaller errors. Especially, the errors of the image velocimetries were more affected by the number of particles rather than the sizes of them. As the sizes of interrogation areas were increased, the differences between the maximum and the minimum errors seemed to be reduced. For the size of the interrogation area whose average errors were less than 5%, the differences between the maximum and the minimum errors seemed a little large. For the case, in other words, the uncertainty of the velocity measurements of the image velocimetry was large. In the viewpoint of the particle density, the size of the interrogation area was small for large particle density cases. For the cases of large number of particle and small particle density, however, the minimum size of interrogation area became smaller.

• The KIPS Transactions:PartD
• /
• v.10D no.6
• /
• pp.885-896
• /
• 2003

The typws of service using location Information are being various and extending their domain as wireless internet tochnology is developing and its application par is widespread, so it is prospected that LBS(Location-Based Services) will be killer application in wireless internet services. This location information is basic and high value-added information, and this information services make prior GIS(Geographic Information System) to be useful to anybody. The acquisition of this location information from moving object is very important part in LBS. Also the interfacing of acquisition of moving object between MODB and telecommunication network is being very important function in LBS. After this, when LBS are familiar to everybody, we can predict that LBS system load is so heavy for the acquisition of so many subscribers and vehicles. That is to say, LBS platform performance is fallen off because of overhead increment of acquiring moving object between MODB and wireless telecommunication network. So, to make stable of LBS platform, in this MODB system, acquisition of moving object location par as reducing the number of acquisition of unneccessary moving object location. We study problems in acquiring a huge number of moving objects location and design some acquisition model using past moving patternof each object to reduce telecommunication overhead. And after implementation these models, we estimate performance of each model.