• 한국세라믹학회지
• /
• 제42권7호
• /
• pp.497-502
• /
• 2005

This study investigated the effects of the substrate and powder content on the fabrication of SiO$_{2}$ photonic crystals by evaporation method. Photonic crystals were self-assembled on quartz, Corning 1737 glass, slide glass, and ITa glass to verify the effects of the wetting angle and surface morphology. The powder contents of the solution were varied from 0.2 to 2.0 wt$\%$. The number of photonic crystal layers increased according to the decrease of wetting angle and surface roughness. The resultant photonic crystals showed the best optical characteristics when the number of photonic crystal layers was within 40 and 50. In addition, the intensity peak of Fabry¡?Perot fringes increased when the wetting angle was large and the particle size was small. Photonic crystals coated on ITO glass showed the highest reflectance peak of 63$\%$ relative intensity.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.31-40
• /
• 2004

Direct numerical simulations were performed to analyze the effects of time-periodical blowing through a spanwise slot on a turbulent boundary layer. The blowing velocity was varied in a cyclic manner from 0 to 2A$^{+}$(A$^{+}$ =0.25, 0.50 and 1.00) at a fixed blowing frequency of f$^{+}$=0.017. The effect of steady blowing (SB) was also examined, and the SB results were compared with those for periodic blowing (PB). PB reduced the skin friction near the slot, although to a slightly lesser extent than SB. PB was found to generate a spanwise vortical structure in the downstream of the slot. This vortex generates a reverse flow near the wall, thereby reducing the wall shear stress. The wall-normal and spanwise turbulence intensities under PB are increased as compared to those under SB, whereas the streamwise turbulent intensity under PB is weaker than that under SB. PB enhances more energy redistribution than SB. The periodic response of the streamwise turbulence intensity to PB is propagated to a lesser extent than that of the other components of the turbulence intensities and the Reynolds shear stress.

• 대한통합의학회지
• /
• 제2권2호
• /
• pp.49-58
• /
• 2014

Purpose : This study was to evaluate the effectiveness of exercise therapies for breast cancer patients through review analysis of the rehabilitation they had usually received to increase the quality of their lives. Exercise therapy for breast cancer patients has proven to be highly effective, so it is strongly recommended. Method : Focusing on breast cancer-related journal articles published since 1990, an analysis using the Spolit and Medline search engines was undertaken of breast krebs, tumors, cancer, sportaktivitaet, and exercise in patients with breast cancer. Exercise for breast cancer patients has been considered to have positive effects on fatigue, muscle weakness, and the range of motion of upper extremities, as well as on depression. Breast cancer patients have to be divided according to their identifying clinical characteristics, and then have to be prescribed a suitable exercise program. In accordance with previous articles, a varied exercise program was organized in terms of frequency, duration, and intensity. The frequency was more than three times per week. Its duration was about 30 minutes per session. Result : The intensity of exercise was moderate. The types of exercises included recommended strengthening exercises, as well as various aerobic exercises. Based on previous data, a new exercise method for breast cancer patients was introduced in this study. Conclusion : Above all, exercise programs should be planned according to the different characteristics of breast cancer patients, in order to reduce physical impairments and psychological problems.

• Journal of Forest and Environmental Science
• /
• 제30권3호
• /
• pp.277-284
• /
• 2014

Status of Arbuscular Mycorrhizal (AM) colonization in seven tree species (Albizia saman, Acacia auriculiformis A. Cunn. ex Benth., Albizia lebbeck, Chickrassia tabularis A. Juss., Eucalyptus camaldulensis Dehnn., Gmelina arborea (Roxb) DC, Swietenia macrophylla King.) collected from the hilly areas of Chittagong University (CU) was investigated. Roots and rhizosphere soil samples were collected in different seasons (pre-monsoon, monsoon and post monsoon). Percentage of AM colonization in root and number of spores/100 gm dry soil were assessed. The result of the investigation reveals that the intensity and percentage of AM colonization varied in different forest tree species in different seasons. In this study, maximum AM colonization and spore population were found in pre-monsoon and minimum were in monsoon season. The intensity of colonization was maximum in C. tabularis (74.43%) in pre-monsoon, A. lebbeck (69.45%) in monsoon and S. macrophylla (67.8%) in post monsoon seasons and minimum in A. auriculiformis (53.75%) during pre-monsoon, A. saman (24.4%) in monsoon and A. saman (19.36%) in post monsoon. The number of spores found per 100 g dry soil ranged between 164-376 during pre-monsoon, 27-310 during monsoon and 194-299 in post monsoon season. Out of six recognized genera of AM fungi, Glomus, Sclerocystis, Entrophospora, Scutellospora, Acaulospora and other unidentified spores were observed.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.79-85
• /
• 2006

In this study, to increase the mixing between flue gas and reducing agent, new shapes of $NH_3$ ejection nozzles are designed and experimentally and numerically tested. The nozzles have six holes perpendicular to the ambient flue gas flow and the tilting angle between direction of ambient flow and the hole axis is varied. To evaluate the mixing efficiency of the proposed nozzles, numerical and experimental tests are applied to several flow conditions comparing with single hole nozzle, which is commonly used in conventional SCR process. From the results the nozzle with tilted multi-holes has the large region of high turbulent intensity compared with conventional single hole nozzle. This is originated from the high vorticity near the upstream of the jet flow issuing from the hole. The high turbulent intensity and vorticity magnitude lead to enhanced mixing between flue gas and reducing agent. Hence, the most suitable moral ratio between NOx and reducing agent for the catalytic reaction can be obtained on behalf of the intensified scalar mixing within shorter physical mixing length.

• 한국광학회지
• /
• 제6권4호
• /
• pp.345-351
• /
• 1995

유한한 폭을 갖는 배경에서 기본 어두운 공간솔리톤의 진행특성을 실험적으로 연구하여 전산시늉한 결과와 비교하였다. 실험적으로 빔의 세기가 증가함에 따라 어두운 솔리톤의 폭이 감소하고 배경의 폭은 증가함을 확인하였고 무한한 폭의 배경을 가정한 솔리톤 상수로부터 구한 굴절율의 변화량은 Z-스캔 방법으로 구한 굴절율의 변화량보다 작았다. 유한한 폭을 갖는 배경에 놓인 기본 어두운 솔리톤의 진행을 전산시늉하여 진행거리에 따른 배경의 첨두세기, 어두운 솔리톤의 폭 그리고 솔리톤 상수의 변화를 연구하였다. 유한한 크기의 배경에서 솔리톤상수의 변화를 고려하여 구한 굴절율의 변화량은 Z-스캔 방법으로 구한 굴절율의 변화량과 일치하였다.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.22-27
• /
• 2009

Target design study to improve the quality of an accelerated proton beam from the interaction of a high-intensity short pulse laser with an overdense plasma slab has been accomplished by using a two-dimensional, fully electromagnetic and relativistic particle-in-cell (PIC) simulation. The target consists of a thin core part and a thick peripheral part of equivalent plasma densities, while the ratio of the radius of the core part to the laser spot size, and the position of the peripheral part relative to the fixed core part were varied. The positive effects of this core-peripheral target structure could be expected from the knowledge of the typical target normal sheath acceleration (TNSA) mechanism in a laser-plasma interaction, and were apparently evidenced from the comparison with the case of a conventional simple planar target and the case of the transversal size reduction of the simple planar target. Improvements of the beam qualities including the collimation, the forward directionality, and the beam divergence were verified by detailed analysis of relativistic momentum, angular directionality, and the spatial density map of the accelerated protons.

• Wind and Structures
• /
• 제15권1호
• /
• pp.1-15
• /
• 2012

High-resolution wind data were acquired from a 100-m high offshore tower during the passage of Typhoon Hagupit in September, 2008. The meteorological tower was equipped with an ultrasonic anemometer and a number of cup anemometers at heights between 10 and 100 m. Wind characteristics of the strong typhoon, such as mean wind speed and wind direction, turbulence intensity, turbulence integral length scale, gust factor and power spectra of wind velocity, vertical profiles of mean wind speed were investigated in detail based on the wind data recorded during the strong typhoon. The measured results revealed that the wind characteristics in different stages during the typhoon varied remarkably. Through comparison with non-typhoon wind measurements, the phenomena of enhanced levels of turbulence intensity, gust factors, turbulence integral length scale and spectral magnitudes in typhoon boundary layer were observed. The monitored data and analysis results are expected to be useful for the wind-resistant design of offshore structures and buildings on seashores in typhoon-prone regions.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권3호
• /
• pp.366-370
• /
• 2010

본 논문에서는 한 장의 2-D 이미지를 입력으로 받아 자동적으로 동양화처럼 보이는 그림으로 바꾸어 주는 비 사실적 랜더링(NPR) 시스템을 제안한다. 동양화의 선은 두께가 다양하고 끝이 갈라지는 특성이 있고, 농담의 변화를 주어 대상 물체의 입체감을 표현하는 경향이 있다. 본 논문에서는 이미지의 외곽선 추출을 바탕으로 curvature를 사용하여 선을 따라 변하는 두께를 가진 선을 생성한다. 또한 기존에 수채화 스타일에서 제안된 농담 표현방법과는 반대로 지역적인 세부표현을 증가시키고 광역적인 농담을 줄여준다. 본 논문은 외곽선 추출, 선 그리기를 통하여 다양한 두께의 선을 표현해 주는 방법과, 이미지의 필터링과 intensity 변환을 통한 농담을 표현하는 일련의 연속적인 방법을 제안하다.

• 한국전기전자재료학회논문지
• /
• 제20권7호
• /
• pp.615-619
• /
• 2007

MgO layer plays an important role for plasma display panels (PDPs). In this experiment, ion beam assisted deposition (IBAD) methode was uesed to deposit a MgO thin film and the assisting oxygen ion beam energy was varied from 100 eV to 500 eV. In order to investigate the relationship between the secondary electron emission and the defect levels of the MgO layer, we measured the cathodoluminescence (CL) spectra of the MgO thin films, and we analyzed the CL peak intensity and peak transition. The results showed that the assisting ion beam energy played an important role in the peak intensity and the peak transition of the CL spectrum. The properties of MgO thin film were also analyzed using XRD and SEM, these results showed the assisting ion beam energy had direct effect on characteristics of MgO thin film.