• 한국작물학회지
• /
• 제32권4호
• /
• pp.436-442
• /
• 1987

수도의 화기구조개량을 통한 1대 잡종 품종의 종자 생산성향상을 목적으로 약장, 자약장의 재식밀도, 시비수준에 따른 환경변이와 유전양상을 검토하였다. 그 결과를 요약하면 다음과 같다. 1. 동일이삭내에서 약장은 1차 지복에 비해 2차 지경에서 길었다. 2. Z97B에서는 재식밀도가 낮을수록 약장, 자약장이 길어졌으나 IR43에서는 일정한 경향이 없었다. 3. 시비수준을 달리했을 때 약장에는 차이가 없었다. 4. IR56이 관여된 모든 교배조합 F$_1$ 에서 약장, 자약장의 일반조합능력, 특정 조합능력이 높았다. 5. IR56/IR 8의 F$_2$ 세대에서 체장의 유전분난양상은 장약이 열성인 연속변리를 보였고 자약장은 장자약가 초우성인 연적변리를 보였다. 6. 화기형질의 광의의 유전력은 체장 0.46, 광업장 0.88 이었다. 7. 약장과 자약장의 표현형상관과 유전상관은 각각 0.33, 0.44 정도였다.

• 한국전기전자재료학회논문지
• /
• 제14권9호
• /
• pp.726-730
• /
• 2001

Temperature stabilities of dielectric constraints and resonant frequencies of the substrates are very important in piezoelectric ceramics oscillators and filters. In this study, it was investigated temperature stability of the length-extensional vibration mode of Pb(Zr$\_$y/Ti$\_$1-y/)O$_3$+x[wt%]Cr$_2$O$_3$ ceramics. The mode can be utilized in fabricating ultra-small 455 kHz IF devices. Addition of Cr$_2$O$_3$ in morphotrophic phase PZT decreased the variations of dielectric constant, electro-mechanical coupling factor k$\_$31/ and resonant frequency by thermal shock. As additive weight of Cr$_2$O$_3$increased, the temperature coefficient of resonant frequency changed from positive number to negative one. And the composition tith temperature coefficient of resonant frequency was shifted to the one with increased Cr$_2$O$_3$ additive weigh by thermal aging.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.879-883
• /
• 2000

A system for measuring and adjusting the oscillating frequency of a balance wheel whick determins the accuracy of mechanical timers. The balance wheel oscillates rotatively suspended by a hair spring which is welded at the other end to the pivot tube. The natural oscillatory frequency of the balance wheel is determined by the length of hairspring from the balance wheel to the point if other parameters the length in the torsional oscillation model are not changed, so the frequency of the balance wheel can be adjusted to meet a requirement by the adjustment of the hairspring length using ultrasonic welding. And the movement of wheel teeth is measured in realtime by a high speed photo fiber sensor and Auto Correlation is used to find a more accurate oscillation period from the measured signal with some variations.

• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2006년도 정기총회 및 제37차 춘계 국제학술발표대회
• /
• pp.192-195
• /
• 2006

Current study was conducted to investigate the effect of different hanging techniques (achilles tendon, aitch bone and pelvic ligament) on variations in sarcomere length and palatability within and between muscles using thirty-four Angus steer sides. Results showed that tenderstretch(by either suspension method) resulted in longer sarcomeres for most positions within the major leg muscle than did conventional hanging method, but in some minor muscles(eg., mm. gluteus profundus, gastronemius, and gracilis) tenderstetch allowed the muscles fibres to shorten. Some tenderstretched muscles(e.g., m. gluteus profundus, 1.5 ${\mu}m$) appeared not to toughen even at very low sarcomere lengths, while others toughened at higher sarcomere lengths. The current data demonstrated that the effect of tenderstretch on the length of sarcomeres and its influence on palatability varied between muscles, Overall the difference between the two tenderstretch methods was for the aitch method to produce meat that was 3.2 units more palatable than the ligament hanging method.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.416-425
• /
• 1993

To investigate the characteristics of the merged jet arising from the interaction of two opposing curved wall jets over a circular cylinder in still air, mean velocity, Reynolds stresses, triple moments and integral length scale were measured using hot-wire anenometry. The turbulent kinetic energy and shear stress budget were evaluated using the measured data. The variations of the Reynolds stresses, the triple moment and integral length scale are severe in the interaction region. The pressure diffusion terms are found to be very large when compared the other terms in the interaction region. The distributions of the Reynolds stress and the triple moment in the similar region are found to be similar to those of conventional plane jets.

• 한국가시화정보학회지
• /
• 제8권3호
• /
• pp.22-28
• /
• 2010

In the present study, we performed the velocity field measurement in a microchannel using a focal length variable micro liquid lens. The liquid lens is used as a beam expander in a micro-PIV system to acquire the scatter image of the seeded particle. A thin film-type micro liquid lens was made of PDMS material and it was attached on top of the 700-micron-wide working fluid supply channel trench. As a result, the focal length and contact angle of the liquid lens changed with variations in applied pressure.

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.987-995
• /
• 2006

A reversed trapezoidal fin with the fluid in the inside wall is analyzed and optimized in this study. As a fin base boundary condition, the heat transfer from inside wall fluid to the fin base is considered. The values of fin base temperature with the variations of inside wall fluid convection characteristic number and fin base length are listed. The heat transfer, fin effectiveness, fin length and fin base height are optimized as a function of fin base length, convection characteristic number ratio, fin shape factor and fin volume.

• 미생물학회지
• /
• 제29권3호
• /
• pp.189-194
• /
• 1991

The degree of the genetic variations among Clostridium thermocellum ATCC 27405 and the wild type strains was investigated by the mehtod of GC ratio, DNA-DNA hybridization and RFLP (Restriction Fragment Length Polymorphism) patterns by ribosomal RNA and M13 probe. GC ratio and KNA homology values of th three isolates were approximately equal to those of ATCC type strain. The RFLP patterns by the rRNA and M13 probe showed some differences among C. thermocellum ATCC 27405, wild type strains and Clostridium thermohydrosulfuricum ATCC 33223, indicating that the two probes can be useful in subspecies- and apecies-identification.

• 말소리와 음성과학
• /
• 제7권1호
• /
• pp.107-116
• /
• 2015

The present experiment investigated the effect of word length on the length of f0 intervals for North Kyungsang children. In order to find out the lengths of the f0 intervals, the f0 values at the midpoints of vowels in words were measured. F0 estimates were computed as intervals consistent with the logarithmic scale corresponding to the number of syllables in the words. The results indicated that the mean f0 intervals in words of different lengths showed a significant difference for the HH in HH vs. HHL and the LH in LH vs. LLH for North Kyungsang children. Adult speakers from the North Kyungsang region significantly differed only within the HH in HH vs. HHL. Adult speakers made a noticeable contribution in this characteristic from the children. The result of the adult study was presented to confirm whether the children used a North Kyungsang dialect. With respect to individual speaker differences, the North Kyungsang children showed more or less consistent patterns in quantile-quantile plots for the HH vs. HHL, but for the HL vs. LHL and LH vs. LLH, there were more variations than for the HH vs. HHL. The individual speakers' variation was the largest for the HL vs. LHL and the smallest for HH vs. HHL. Considering these results, the effect of word length on f0 intervals tended to show pitch accent-type-specific characteristics in the process of prosodic acquisition.

• 한국의류산업학회지
• /
• 제16권1호
• /
• pp.1-12
• /
• 2014

Leggings are recognized as unique fashion items that meet the needs of customers to express individuality due to their protective and thermal functions. They are highly practical fashion items that show a casual, street and sportive style with a noted influence on outdoor leisure fields. This study analyzes the sociocultural background for the spread of leggings as well as their design characteristics, coordination characteristics and authentic characteristics. The formative characteristics of modern legging designs are as follows. First, the shapes of modern leggings are ankle-length, calflength, above-knee, knee-length, stirrup and top of the foot-length. Leggings are transformed in many ways: length-expansion, side-slit, unbalanced length, variations of straps, cut-out, trimmings, pattern transformation and complex form. Second, modern leggings contain achromatic colors in modern and sensual image, vivid colors in sportive image and metallic colors futuristic and technical image. Third, leggings patterns value originality, uniqueness and rarity as shown by printed geometric patterns, hand crafted geometric and natural patterns, and abstract patterns expressed through various materials and themes. Fourth, modern leggings' textures are categorized into erotic, simply-functional, seasonless, glossy, and metallic. Functional and fashionable leggings reflect the psychological needs of modern society. This study suggests a direction for the development of legging designs and provides a theoretical database for higher value-added leggings business.