• Journal of Korea Foundry Society
• /
• v.30 no.2
• /
• pp.83-88
• /
• 2010

Bulk amorphous alloys with reasonable glass forming ability and large plasticity were found in Zr-Cu-Al alloys. Further increase in the GFA and the ductility is expected by appropriately choosing a fourth element. In this study, we select Be as the fourth element and added to the Zr-Cu-Al system to synthesize $(Zr_{57.4}Cu_{38.1}Al_{4.5})_{100-x}Be_x$(x=0~16) alloys and the glass forming ability and the plasticity were measured. With Be addition, the supercooled liquid region (${\Delta}T_x$), the plasticity and GFA as high as $134^{\circ}C$, 20.5%, 7 mm, respectively, can be obtained. Herein, we present the effect of Be addition on the variations of various mechanical properties and thermal characteristics of the $(Zr_{57.4}Cu_{38.1}Al_{4.5})_{100-x}Be_x$ alloys.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.972-975
• /
• 2001

The effect of Cr$_2$O$_3$(0 to 0.5 wt%) doping on the microstructure and electrical properties of ternary Pb(Zr,Ti)O$_3$-Pb(Ni,Nb)O$_3$piezoelectric ceramic has been investigated. Abnormal grain growth (grain size 3.3 to 11.2 $\mu$m) and densification are found. Minor additives of $\leq$0.1 wt% improve the mechanical coupling factor, but with more additives of $\geq$0.2 wt% electrical properties deteriorate. Thus, these phenomna can be ascribed mainly to anomalous developed microstructure. The large grains were composed of a core region that is free of Cr and a surrounding shell region rich in Cr. The interfaces between the core and the shell were composed of misfit dislocations. The mechanical properties of the specimens were strongly influenced by this microstructural change. The microstrutural and compositonal evolution of the specimens containing different amounts of Cr$_2$O$_3$were monitored. Electrical properties were measured and related to the variations in the microstructure.

• Journal of the Korean earth science society
• /
• v.38 no.5
• /
• pp.345-356
• /
• 2017

It is important to understand the variability of tropospheric ozone since it is both a major pollutant affecting human health and a greenhouse gas influencing global climate. We analyze the characteristics of East Asia tropospheric ozone simulated in a chemistry-climate model. We use a global chemical transport model, driven by the prescribed meteorological fields from an air-sea coupled climate model simulation. Compared with observed data, the ozone simulation shows differences in distribution and concentration levels; in the vicinity of the Korean Peninsula, a large error occurred in summer. Our analysis reveals that this bias is mainly due to the difference in atmospheric circulation, as the anomalous southerly winds lead to the decrease in tropospheric ozone in this region. In addition, observational data have shown that the western North Pacific subtropical high (WNPSH) reduces tropospheric ozone across the southern China/Korean Peninsula/Japan region. In the model, the ozone changes associated with WNPSH are shifted westward relative to the observations. Our findings suggest that the variations in WNPSH should be considered in predicting tropospheric ozone concentrations.

• Ocean and Polar Research
• /
• v.36 no.2
• /
• pp.189-197
• /
• 2014

The pearl-spot damsel, Chromis notata, is one of the important fishery species in Korea. While C. notata has been commonly harvested in southern Korea, the increasing number of C. notata in higher latitudes has crucial ecological, economic and evolutionary implications under conditions where the climate is rapidly changing. Here we examined the morphological and genetic characteristics of C. notata to assess patterns of geographical variations among the groups from three different sites. The groups were clearly distinguishable in the analysis of morphological characteristics. On the other hand, the groups were genetically indistinguishable. All individuals fell within a single clade in the neighbor-joining tree but appeared scattered in the haplotype network. Several haplotypes are shared among the sampling sites (Jejudo-Ulleungdo; Hap 9, Wangdolcho-Ulleungdo; Hap 28, Hap 33, Hap 34). Although control region markers did not elucidate the spatial patterns in genetic characteristics, Wangdolcho and Ulleungdo groups appear to exhibit a more robust gene flow between the two groups than with Jejudo group. Integrative approaches such as those combining morphological and genetic analyses minimize potential errors caused by limited perspectives of each analysis and can provide useful information for discovering functional DNA regions attributable to morphological characteristics expressions.

• The Journal of Korean Society of Virology
• /
• v.30 no.2
• /
• pp.131-139
• /
• 2000

Bovine leukemia virus (BLV) is an etiological agent of chronic diseases in cows worldwide. The BLV is one of retroviruses that contain a multi-functional enzyme, reverse transcriptase produced from the pol gene in its genome. We have sequenced some regions in the pol gene of BLV proviruses found in the Southern province of Korea from samples that turned out to be BL V positives by a PCR analysis. On the 5' side of the BLV pol gene (polymerase region), it was found that there were four leucines located at every 7 amino acids. They can form a leucine zipper motif that was not same as the pol gene of Japanese BLV isolate. The sequencing result of the proviral pol gene in Korean-type BLV also revealed some mutations leading to amino acid changes such as $CCT(Pro){\to}CTC(Leu)$, $AAT(Asn){\to}AAA(Lys)$, and non-sensible variations i.e., $TCT(Ser){\to}TCC(Ser)$, $ATT(Ile){\to}ATC(I1e)$ and $ACG(Thr){\to}ACA(Thr)$. On the 3' side of the pol gene (integrase region), some nucleotide sequences were mutated and led to amino acid changes. Among them, a mutation, $GAA(Glu){\to}GAC(Asp)$ occurred in many Korean-type BLV proviruses was very interesting because the amino acid was regarded as one of the most conserved amino acids in the retroviral integrase. It was also notable that the mutation on any leucine residue did not occur, in spite of its frequent appearance.

• Speech Sciences
• /
• v.13 no.4
• /
• pp.69-87
• /
• 2006

This study aims to describe the vowel system of present-day American English and to discuss some of its phonetic variations due to regional differences. Fifteen speakers of American English from various regions of the United States produced the monophthongs of English. The vowel duration and the frequencies of the first and the second formant were measured. The results indicate that the distinction between the vowels [c] and [a] has been merged in most parts of the U.S. except in some speakers from eastern and southeastern parts of the U.S., resulting in the general loss of phonemic distinction between the vowels. The phonemic merger of the two vowels can be interpreted as the result of the relatively small functional load of the [c]-[a] contrast, and the smaller back vowel space in comparison to the front vowel space. The study also shows that the F2 frequencies of the high back vowel [u] were extremely high in most of the speakers from the eastern region of the U.S., resulting in the overall reduction of their acoustic space for high vowels. From the viewpoint of the Adaptive Dispersion Theory proposed by Liljencrants & Lindblom (1972) and Lindblom (1986), the high back vowel [u] appeared to have been fronted in order to satisfy the economy of articulatory gesture to some extent without blurring any contrast between [i] and [u] in the high vowel region.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.1
• /
• pp.36-44
• /
• 2006

Cohesive sediment transport in coastal region has been studied by numerical modeling. A finite element numerical model was setup to simulate hydrodynamics and sediment transport in the coastal region with complex topography. Only physical features of observed sediments has been used to determine erosion rates of bottom sediments together with the previous research results. The simulation results using the simply determined equation of erosion rates were compared with time variations of the observed SS concentration and showed good agreements. In conclusion, this method can be used to estimate transport of cohesive sediment conveniently.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.3 s.153
• /
• pp.219-227
• /
• 2007

A stereo-PIV (particle image velocimetry) technique is used to investigate the vortical structure of the wake behind a rotating propeller in the present study. A four bladed propeller is tested in a cavitaion tunnel without any wake screen. Hundreds of instantaneous velocity fields are phase-averaged to reveal the three dimensional spatial evolution of the flow behind the propeller. The results of conventional 2-D PIV are also compared with those of the stereo-PIV to understand the vortical structure of propeller wake deeply. The variations of radial and axial velocities in the 2-D PIV results seem to be affected by the out-of-plane motion. generating a little perspective error in the in-plane velocity components of the slipstream. The strong out-of-plane motion around the hub vortex also causes the perspective error to vary the axial velocity component a little at the near wake region. The out-of-plane velocity component had the maximum value of about 0.3U0 in the tip vortices and continued its magnitude in the wake region.

• Journal of the Korean Ceramic Society
• /
• v.26 no.3
• /
• pp.315-322
• /
• 1989

Li2O-Al2O3-SiO2 system glasses contained P2O5, TiO2 and ZrO2as the nucleating agents were melted and formed. The glass was subsequently heated first to nucleate and then to grow the crystals. At constant nucleating agent content the base glass compositions were varied and the influences of these variations on the crystallization behaviour were investigated. The study was made by measurement of thermal expansion coefficient, differential thermal analysis, X-ray diffraction analysis, scanning electron microscope observation and transmission measurement of crystallized glass specimen in visible region. It was shown that the content of crystalline phase decreased with increasing SiO2 content as well as decresing Li2O in the base glass compositions. As the result of X-ray diffrection analysis, the major crystal was $\beta$-quartz solid solution. The degree of crystallinity which was calculated using the noncrystalline scattering methods increased in S-shape with increasing heat treatment time. This change was similar to that in thermal expansion coefficient. The transmissions of 5mm thick samples were 80-90% in visible ray region.

• Journal of the Korean Institute of Gas
• /
• v.19 no.5
• /
• pp.1-6
• /
• 2015

In this paper, the strength safety of a fuse cock main body has been analyzed by the finite element method. The stress and displacement behaviour characteristics have been investigated for thickness variations at the region of (T) between a ball valve and a fuse cock safety connector. The FEM analyzed results recommend that the optimized thickness at the region of (T) is from 1.55mm to 1.6mm for the supplied gas pressure of 1.5~3.5MPa. This is considered for the optimized strength safety and light weight of a fuse cock main body.