• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.414-419
• /
• 1995

The wire displacement of wire electric discharge machine has been measured using He-Ne laser. A measurement system consisted of He-Ne laser, A/D converter, 4 divided photodiode, amplifier, sensor process instrument, and personal computer. The processing parameters were varid with feed rate, wire tension, wire speed and voltage. The laser beam intensity transmitted on a 4 divided photodiode was varied by processing wire electric descharge machine with various process parameters. The 4 divided photodiode and amplifier were used to change the detected beam intensity into voltage. Variation of wire displacement was between 11 and 125 .mu. m. The wire tension was dominant on the variation of wire displacement among many parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.957-961
• /
• 1991

The parameters of electro-hydraulic servo system are closely dependent on the variation of system characteristics. Especially the parameter sensitivity is incleased in the servo system with heavy load and wide operating range. This paper shows the effect of parameter variation and the experimental parameter values of high power servo system.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1255-1260
• /
• 2008

This study is simulation of high elevated liquid line of a modular heat pump system to observe longitudinal subcooling variation. In a high elevated tube, subcooled refrigerant(R410A) through a condenser changes its states by heat transfer with surrounding air and by pressure drop from elevation. In this study, the liquid line was simulated through correlations of heat transfer and pressure drop for the variation from single-phase into two-phase flow. Pressure drop, heat transfer rate and vapor quality were calculated as key parameters. Two-phase turning heights and variations of the key parameters were confirmed from the simulation. As a result, high elevation of liquid line has great influence on upward flow, which requires additional equipment to compensate the variation.

• 대한전자공학회논문지
• /
• 제25권8호
• /
• pp.867-873
• /
• 1988

The degradation due to channel distortion in a quadrature modulation system from the ideal constant values over the bandwidth of a direct sequence spread spectrum signal are considered. Through using series expansion for the channel gain and phase response, the degradation in the correlator output at the receiver is found as a function of the parameters involved , including phase error, delay error, linear gin variation, quadratic gain variation, and quadratic phase variation.

• 전자공학회논문지C
• /
• 제34C권8호
• /
• pp.64-70
• /
• 1997

This paper presents a parameter optimization method using evolutionary programming in voltage reference circuit because the designer must select appropriate parameter values of the circuit taking into consideration both powr voltage and temperature variation. In this paper, evolutionary programming is suggested as an approach for finding good parameters with which the reference voltage variation is small with respect to temperature variation. Simulation results. Simulation results show that this method is effective in circuit design.

• Journal of Power Electronics
• /
• 제13권5호
• /
• pp.854-860
• /
• 2013

The voltage variation problem at the point of common coupling (PCC) in a grid-connected wind turbine is investigated. The voltage variation problem is one of the most frequent power quality issues for the grid connection of large amounts of input power in a weak grid. Through the simplified modeling of the wind turbine and power network, the magnitude of PCC voltage variation is calculated by using the equivalent circuit parameters and output power of the wind turbine. The required amount of reactive power that can compensate the voltage variation is also presented analytically by using the vector diagram method. The proposed calculation and compensation method of the PCC voltage variation is verified by computer simulations and experiments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1213-1218
• /
• 2007

The brake judder comes from non-uniformities in the tire/wheel assembly caused by mechanical effects such as a brake torque variation (BTV). A disc thickness variation (DTV) related with the kinematic behavior of the disc was investigated a main source of BTV. In this study, a dynamic model with brake corner assembly of full vehicle using MSC.ADAMS was correlated by experiment of judder phenomenon. Judder was generated and correlated systematically by judder experiment in chassis and brake dynamometer from variation in the thickness of the disc. Also it has been found a judder transfer path and variation of the braking pressure. Through analysis of transfer function and movement of subsystem caused by BTV generation, design parameters have been found. Based on the results obtained from parameter study of suspension module, the effective design process and developed model with brake corner assembly was suggested for vibration reduction of steering wheel caused by the judder phenomenon.

• The Korean Journal of Physiology and Pharmacology
• /
• 제3권5호
• /
• pp.491-499
• /
• 1999

This study was designed to evaluate the efficacy of dynamic parameters, such as correlation dimension $D_2,$ by comparing spectral electroencephalographic (EEG) parameters. These parameters are used to estimate the depth of halothane anesthesia as defined by the presence of body movement in response to a tail clamp. Six rats were used and each of them was exposed to halothane sequentially at the concentrations of 0%, 0.5%, 1.0% and 1.5% for 30 min. A tail clamp was applied every five min and the movements were recorded at each concentration level. The spectral parameters and the dynamic parameters were derived from 20-sec and 10-sec segments, respectively, from the last 5-mins of EEG recording at each concentration level. Correlation coefficients between the parameters and the movements were calculated. Standardized values of three parameters, betaL power, median power frequency (MPF), and $D_2$ were derived by calculation based on the number of animals showing the movement in response to a tail clamp. The betaL power had the largest correlation coefficient to spontaneous movement and to the response to a tail clamp than any other band parameter. MPF had a better correlation with the movement than 90% spectral edge frequency. Among the dynamic parameters, $D_2$ on the parietal cortex had a better correlation with the movement. The level of deviation and variation of standardized $D_2,$ MPF, and betaL were significant (p<0.01). The order of deviation and variation was; betaL power > MPF > $D_2.$ The correlation dimension serves as a better index for the depth of halothane anesthesia defined in forms of a response to external stimulation.

• 대한지하수환경학회지
• /
• 제4권1호
• /
• pp.54-59
• /
• 1997

하천 주변의 쓰레기 매립장 등과 같은 오염원은 하천수와 지하수의 오염을 야기시킨다. 하천 수위의 영향을 받는 하천구역에서 오염원의 이동과 대수층 특성과의 반응을 고찰하였다. 이를 위해 하천 수위의 변화에 따른 변동속도 성분을 지하수의 지배방정식에 대한 해석해를 이용하여 유도하였다. 변동 속도 성분을 고려하여 이송확산방정식에 대한 수치모형을 구성하였으며 구성된 수치 모형의 타당성을 위해 해석해와 비교한 결과 거의 일치하였다. 수치실험을 위한 자료는 난지도의 대수층 특성값을 이용하였다. 대수층 특성값에 대한 범위를 설정하고 이를 이용하여 하천 수위와 오염원의 이동에 대한 반응을 고찰한 결과, 저류계수를 제외한 수리전도도와 유효공극율은 오염원의 이동에 대한 반응이 미소하게 나타났다. 그리고 하천 수위의 변화에 민감한 반응을 나타낸 경우는 저류계수가 $10^{-2}$ 차수임을 알았다.

• 한국음향학회지
• /
• 제24권7호
• /
• pp.410-415
• /
• 2005

최근 대부분의 화자확인 시스템은 패턴 인식 접근방식에 기인하고 있다. 패턴 분류기의 성능은 화자의 특징 파라미터를 어떻게 분류하는가 하는 데에 기인한다. 그 특징 파라미터를 잘 분류하기 위해서는, 화자간 변이를 최대화하고 특징 파라미터 간 거리를 효과적으로 측정하는 것이 매우 중요하다. 따라서, 본 논문에서는 개인 모델과 월드 모델을 동시에 배치함으로써 화자간 변이를 최대화 할 수 있는 개선된 혼합 모델 구조를 제안한다. 결정 과정 시 제안한 혼합 모델 방식을 사용함으로써 화자간 변별력을 최대화 할 수 있었다. 또한, 입력데이터에 대한 개인 모델과 월드 모델의 거리비율에 따라 심볼 확률 값을 가중하여 벡터 양자화 에러를 줄이는 가중치 함수를 제안 한다. 실험 결과, 이두 가지 방법을 취함으로써 DCF (Detection Cost Function)를 $2.37\%$에서 $1.16\%$로 낮출 수 있었다.