• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.747-752
• /
• 2009

Three dimensional(3D) Poisson's equation is used to calculate the potential variation for FinFET in the channel to analyze subthreshold current and short channel effect(SCE). The analytical model has been presented to lessen calculating time and understand the relationship of parameters. The accuracy of this model has been verified by the data from 3D numerical device simulator and variation for dimension parameters has been explained. The model has been developed to obtain channel potential of FinFET according to channel doping and to calculate subthreshold current and threshold voltage.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.245-249
• /
• 2009

According to the increase of intelligent vehicles many automotive electric components are installed. The wire harness which connects those also increases. The crimping process for compressing the copper wire bundle into the terminal is a key process to assure the good quality of wire harness. For the case of inadequate forming condition many shape failures such as less-filling, over-filling are happen in the crimping process. Even though the quality of crimping shape is satisfactory the quality check for electrical resistance of wire harness is sometime not satisfied the qualification due to large variation of electrical resistance of wire harness under climate test. This large variation is thought to be related with the malfunction automotive electric system and caused by the internal stress of wire, which occurred during the crimping process. In this paper we develop the 3D-FEM simulation scheme and design methodology of optimum terminal shape. Also the effect of terminal shape on the residual stress is discussed.

• Journal of Korea Water Resources Association
• /
• v.49 no.7
• /
• pp.635-644
• /
• 2016

This study investigates variation of flow characteristics due to variation of branch channel width and discharge ratio at bifurcation channel using 2D numerical model. The calculated result considering secondary flow is more accurate and stable than without considering one. The diversion flow rate ($Q_3/Q_1$) is reduced by flow stagnation effect according to the interaction of the secondary flow and flow separation zone in branch channel. The less upstream inflow or the lower upstream velocity, the bigger variation of diversion flow rate by changing branch channel width. At uniform downstream boundary condition, the rate of change in Froude number of downstream of main channel($Fr_2$)-diversion flow rate ($Q_3/Q_1$) relations is similar about -2.4843~-2.6675 when branch channel width ratio (b/B) is decreased. At uniform diversion flow rate ($Q_3/Q_1$) condition, the width of recirculation zone in branch channel is decreased when branch channel width ratio (b/B) is decreased. The less upstream inflow in the case of increasing branch channel width or the narrower branch channel width in the case of increasing upstream inflow, the bigger reduction ratio of recirculation zone width. At uniform inflow discharge ($Q_1$) condition, diversion flow rate, the width and length of recirculation zone in branch channel are decreased when branch channel width ratio (b/B) is decreased.

• Journal of Korean Society of Forest Science
• /
• v.74 no.1
• /
• pp.56-60
• /
• 1986

Excised mature embryos of P. koraiensis were plated on a series of G.D. basic media supplemented with growth regulators as follow; $0.1mg/{\ell}$ NAA(M-1); $0.1mg/{\ell}$ NAA and 2,4-D (M-2); $0.1mg/{\ell}$ 2,4-D and BAP (M-3); $0.1mg/{\ell}$ 2,4-D and kinetin (M-4). Cytological study of the callus showed that thercentage of occurrance of diploid cells was observed 52% in M-3 and 36% in M-4, while that was revealed 29% in M-1 and 17% in M-1. The frequency of diploid cells was increased on the M-3 and M-4 media. The stable chromosome state is a crucial factor for organogenesis. Therefore, it can be inferred that the callus tissues cultured on media supplemented with both auxin and cytokinin have the greatest possibility of organogenesis.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.5 no.2
• /
• pp.8-14
• /
• 1968

A linear current-pulse discriminator consisting: of a transistor monostable multivibrator and a Si tunnel diode is described. The input currant pulse range is about 50$\mu$A~5.23mA. The measured maximum linearity deviation is $\pm$0.75% in the input current pulse range mentioned above. The pulse resolving ability of the discriminator measured depends upon the bias current through the T, D. ; and, under the reverse bias current of 3mA, the resolving time is 2rs if allow the excess pulse amplitude of 5%. The threshold stability of the discriminator depends mainly upon the stability of the peak current Ip of the T. D. ; and, under the ambient temperature variation from $0^{\circ}C$ to 5$0^{\circ}C$, no bigger threshold variation than the maximum linearity deviation, i. e. $\pm$ 0.75%, was observed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.2
• /
• pp.137-143
• /
• 1999

The study of the high speed machining of inclined plane using ball end mill is performed. The use of ball end mill is rapidly growing in die and mold manufacturing. The cutting characteristics, such as cuttin g force, surface roughness and surface profile, are varied according to the variation of cutting directions. Free surface is cut using ball end mill, the surface profile is greatly varied depending upon the cutting direction. So this study will deal with the characteristics of cutting such as cutting efficiency according to the inclined plane of the workpiece, the cutting force according to tool path, surface profile and the roughness of surface. The optimal cutting direction to be applied the cutting for 3-D sculptured surfaces can be show through the results of this study.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1679-1685
• /
• 1989

In this paper, a new design of GaAs level converter is proposed, and anlyzed wth the variation of the threshold voltage of E/D MESFETs. The threshold voltage ranges analyzed are -0.05V to 0.35V for enhancement type MESFETs and -0.3V to -0.7V for depletion type MESFETs. In this range, the variation of the input characteristics of the conventional level converter designed to convert the level of DCFL using Vss of -0.8V to that of -0.2V, is greather than 600mV, but of the level converter proposed here is less than 100mV.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.506-509
• /
• 1997

A novel narrowband wavelength bandpass filter with a large side-lobe suppression was proposed in vertical coupler structure using coupling variation in propagation direction. Combination of a half sinusoidal distributed and a slow coupling schmes was used for narrow bandwidth and small side-lobes. Simulation showed 1.5 nm passband at 1.5507 $\mu\textrm{m}$ and the side-lobes were suppressed more than 20 dB which is two times larger than that of a constant coupling filter. A monolithic two-channel wavelength demultiplexer was proposed and theoretically investigated.

• Transactions of Materials Processing
• /
• v.33 no.2
• /
• pp.123-131
• /
• 2024

Plastic, the main material of FFF-type 3D printing, exhibits lower strength compared to metal. research aimed at increasing strength is needed for use in various industrial fields. This study analyzed three X-shape infill patterns(grid, lines, zigzag) with similar internal lattice structure. Moreover, tensile test considering weight and printing time was conducted based on the infill line multiplier and infill overlap percentage. The three X-shape infill patterns(grid, lines, zigzag) showed differences in nozzle paths, material usage and printing time. When infill line multiplier increased, there was a proportional increase in tensile strength/weight and tensile strength/printing time. In terms of infill overlap percentage, the grid pattern at 50% and the zigzag and lines patterns at 75% demonstrated the most efficient performance.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.1
• /
• pp.61-68
• /
• 2009

This paper is concerned with the investigation of the structural behavior of waffle structure. Parametric variation on waffle floor thickness, main beam depth and column sizes are imposed to study the effects on mode shapes and natural frequencies of waffle structures. Comparisons between FEM models using shell and 3D-solid elements have also been made. The analysis result has shown that the mode frequencies increase with i) increase in main beam depth at level 2 and ii) decrease in waffle slab thickness at level 3. Both 3D and 2D model shown similar mode shapes. Besides, there is a consistent difference in mode frequencies between 3D and 2D model ranging from 25% to 36%.