• International Journal of Advanced Culture Technology
• /
• v.2 no.2
• /
• pp.11-14
• /
• 2014

In the smart grid, it will be possible to communicate with the consumers for the purposes of monitoring and controlling their power consumption without disturbing their business or comfort. This will bring easier administration capabilities for the utilities. On the other hand, consumers will require more advanced home automation tools which can be implemented by using advanced sensor technologies. For instance, consumers may need to adapt their consumption according to the dynamically varying electricity prices which necessitates home automation tools. This paper tries to combine neural network and nonlinear autoregressive with exogenous variable (NARX) class for next week electric load forecasting. The suitability of the proposed approach is illustrated through an application to electric load consumption data. The suggested system provides a useful and suitable tool especially for the load forecasting.

• Korean Journal of Child Studies
• /
• v.34 no.1
• /
• pp.1-20
• /
• 2013

This study examined the emergent literacy development of children and the effects of the home literacy environment on it. 861 pairs each-consisting of a mother and a child aged from three to six years old were asked to complete the early literacy parent questionnaire (Boudreau, 2005) and the home literacy environment questionnaire (Park & Kim, 2008). The results showed that : (1) girls achieved higher scores than boys in emergent literacy and its subcategories. (2) there were age differences in all of the subcategories of emergent literacy except the categories of 'orientation toward literacy' and 'phonological awareness'. (3) The study revealed that 'reading books' in the home literacy environment was the most contributive variable in predicting emergent literacy after controlling the age and gender followed by 'literacy learning'

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.719-724
• /
• 2004

The ribs of deformed bars can split the cover concrete by wedging action or shear off the concrete in front of the ribs. As slip of deformed bars increases, the rib face angle is flattened by the crushed concrete wedge, which reduces the rib face angle to a smaller bearing angle. The roles of bearing angle are explored to simulate this observation. Analytical expressions to determine bond strength for splitting and pullout failure are derived, where the bearing angle is a key variable. As the bearing angle is reduced, splitting strength decreases and shearing strength increases. When splitting strength becomes larger than shearing strength, the concrete key is supposed to be sheared off and the bearing angle is reduced with decreasing the splitting strength. As bars slip, bearing angle decreases continually so that splitting bond strength is maintained to be less than shearing bond strength. The bearing angle is found to play a key role in controlling the bond failure and determination of bond strength of ribbed reinforcing steel in concrete structures.

• International Journal of Concrete Structures and Materials
• /
• v.18 no.2E
• /
• pp.73-77
• /
• 2006

This paper shows a study of the efficiency of expansive additive and shrinkage reducing admixture in controlling restrained shrinkage cracking of high performance concrete at early age. Free autogenous shrinkage test of $100{\times}100{\times}400mm$ concrete specimens and simulated completely-restrained test with VRTM(variable restraint testing machine) were performed. Creep and autogenous shrinkage of high-performance concrete with and without expansive additive and shrinkage reducing admixture were investigated by experiments that provided data on free autogenous shrinkage and restrained shrinkage. The results showed that the addition of expansive additive and shrinkage reducing admixture effectively reduced autogenous shrinkage and tensile stress in the restrained conditions. Also, it was found that the shrinkage stress was relaxed by 90% in high-performance concrete with and without expansive additive and shrinkage reducing admixtures at early age.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.5 s.236
• /
• pp.698-706
• /
• 2005

Finish machining of a curved surface is often carried out by an NC system with curve interpolation in the field. This NURBS interpolation adopts a feedrate optimizing strategy based on both the geometrical information and dynamic properties. In case of a finish cut using a ball-end mill, the curve interpolator needs to take the machining process into account for more improved surface, while reducing the polishing time. In this study, the effect of low machinability at the bottom of a tool on surface roughness is also considered. A particular curve interpolation algorithm is proposed fur generating feedrate commands which are able to control the roughness of a curved surface. The simulation of the machined surface by the proposed algorithm was carried out, and experimental results are presented.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.607-612
• /
• 2000

Microprecision agriculture for a fully controlled plant factory is proposed in this paper. Microprecision agriculture can be attained by using plant factories to realize profitable alternative agriculture. A closed, fully controlled, plant-growing factory is far better in terms of minimizing all sorts of waste. The limit and optimum design concept has to be applied to establish an economically feasible, fully controlled, plant-growing factory. To achieve this objective, microprecision technologies have to be developed. Microprecision technologies should be involved in sensing, modeling, controlling, and collecting information for the mechatronics for plant production. Basic technologies for microprecision are already available; they are SPA (speaking plant approach to environmental control), AI (artificial intelligence: expert systems, neural networks, genetic algorithms, photosynthetic algorithms etc.), bioinstrumentation, non-invasive measurement, biomechatronics, and biorobotics. A microprecision irrigation system for plug production is an example of a microprecision technology that has actually been implemented in a plug seedling production factory.

• New & Renewable Energy
• /
• v.3 no.4
• /
• pp.22-30
• /
• 2007

An expansion device plays an important role in optimizing the heat pumps by controlling refrigerant flow and balancing the system pressures. Conventional expansion devices are being gradually replaced with electronic expansion valves due to increasing focus on comfort, energy conservation, and application of a variable speed compressor. In addition, the amount of refrigerant charge in a heat pump is another primary parameter influencing system performance. In this study, the flow characteristics of the expansion devices are analyzed, and the effects of refrigerant charge amount on the performance of the heat pump and the variation of compressor speed are investigated at various operating conditions. Mass flow rate through capillary tube, short tube orifice, and EEV was strongly dependent on the upstream pressure and subcooling. The heat pump system is very sensitive with a variation of refrigerant charge amount. The performance of it can be optimized by adjusting the flow rate through expansion device to maintain a constant superheat at all test conditions.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1551-1558
• /
• 2007

The standard of evaluating function of speech coder for mobile telecommunication can be shown in channel capacity, noise immunity, encryption, complexity and encoding delay largely. This study is an algorithm to reduce complexity applying to CDMA(Code Division Multiple Access) mobile telecommunication system, which has a benefit of keeping the existing advantage of telecommunication quality and low transmission rate. This paper has an objective to reduce the computing complexity by controlling the frequency band nonuniform during the changing process of LSP(Line Spectrum Pairs) parameters from LPC(Line Predictive Coding) coefficients used for EVRC(Enhanced Variable-Rate Coder, IS-127) speech coders. Its experimental result showed that when comparing the speech coder applied by the proposed algorithm with the existing EVRC speech coder, it's decreased by 45% at average. Also, the values of LSP parameters, Synthetic speech signal and Spectrogram test result were obtained same as the existing method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.8
• /
• pp.498-500
• /
• 2005

In a CDMA system, the capacity is variable and mainly depends on multiple access interference. The multiple access interference has a deep relationship with transmitted or received power The capacity of CDMA2000 1x system is considered to be limited by the forward link capacity Different rate data traffic requires different transmitted power and rate controlling enables the system utilize radio resource more efficiently. A very simple rate control algorithm for data calls in CDMA2000 1x system is proposed. In the proposed algorithm, by monitoring the total transmit power, we can simply adjust data rate to channel conditions and efficiently use radio resources. The proposed algorithm is easy to implement in power controlled CDMA systems.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.1
• /
• pp.25-35
• /
• 2002

This paper presents a heuristic algorithm that a mobile robot avoids obstacles using optical flow. Using optical flow, the mobile robot can easily avoid static obstacles without a prior position information as well as moving obstacles with unknown trajectories. The mobile robot in this paper is able to recognize the locations or routes of obstacles, which can be detected by obtaining 2-dimensional optical flow information from a CCD camera. It predicts the possibilities of crash with obstacles based on the comparison between planned routes and the obstacle routes. Then it modifies its driving route if necessary. Driving acceleration and angular velocity of mobile robot are applied as controlling variables of avoidance. The corresponding simulation test is performed to verify the effectiveness of these factors. The results of simulation show that the mobile robot can reach the goal with avoiding obstacles which have variable routes and speed.