• ALGAE
• /
• 제18권2호
• /
• pp.129-134
• /
• 2003

In order to examine the effects of deep seawater (mesopelagic water in the broad sense) on the growth of macroalgae, the growth and nutrient uptake (nitrate and phosphate) of Ulva sp. (Ulvophyceae, Chlorophyta) were investigated by cultivation in deep seawater (taken from 687 m depth at Yaizu, central Japan, in August 2001), surface seawater (taken from 24 m depth), and a combination of the two. Culture experiments were carried out in a continuous water supply system and an intermittent water supply system, in which aerated 500-mL flasks with 4 discs of Ulva sp. (cut sections of ca. 2 $cm_2$) were cultured at 20$^{\circ}C$ water temperature, 100 $\mu$mol photons $m^{-2}{\cdot}s^{-1}$ light intensity, and a 14:10 light:dark cycle. Nutrient uptake by Ulva sp. was high in all seawater media in both culture systems. The frond area, dry weight, chlorophyll a content, dry weight per unit area, and chlorophyll a content per unit area of Ulva sp. at the end of the experimental period were the highest in deep seawater and the lowest in surface seawater in both culture systems. These values, except for dry weight per unit area and chlorophyll a content per unit area, for each seawater media in the intermittent water supply system were higher than those in the continuous water supply system. We conclude that not only deep seawater as the culture medium but also the seawater supply system is important for effective cultivation of macroalgae.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.275-278
• /
• 2005

In this study, the dynamic properties of a floor impact sound isolation pad expressed in terms of the natural frequency, the dynamic stiffness per unit area and the loss factor are measured by the resonant method. By using the measured dynamic properties, the vibration transmissibility diagram is obtained for each isolation pad, which is compared with the values tested by the impact sound sources at the room in an apartment. From the comparative results, it is found that the noise reduction Performances. of isolation pads are closely connected with the natural frequency and the dynamic stiffness per unit area.

• 콘크리트학회지
• /
• 제2권3호
• /
• pp.65-72
• /
• 1990

섬유 콘크리트 내의 단위 면적당 섬유 개수에 대한 이론식이 공시체의 경계조건의 영향을 고려하여 유도되었다. 또한 단위 면적당의 섬유 개수는 각기 다른 섬유형태, 그리고 다른 용적 혼합율(volume fractions)을 갖는 공시체에 대하여 실험적으로도 산정되었으며 이들 실험치들에 근거한 통계적 해석을 통한 공시체 각 단면에 따른 단위 면적당 강섬유 수의 집중 정도의 차이가 평가 되었다. 또한 vibration에 의한 강섬유의 재향성(reorientation)의 정도는 이론치와 실험치의 차이를 비교함으로서 검토되었다.

• Journal of Forest and Environmental Science
• /
• 제31권3호
• /
• pp.207-213
• /
• 2015

It is estimated that there is a total of approximately 100,000 species in Korea. However, the number is currently about 30,000 and only 16,027 species are listed in the 'Species Korea' (as of December, 2014). Of the listed species, 51 species are designated as the Endangered Species Class I while 195 species are in the Class II, totaling 246 endangered species including 20 mammals. Under the circumstances that development (e.g., roads) is increasingly threatening the persistence of endangered mammals, it is significant to identify and preserve suitable habitats for them. In this context, evaluating the values of the suitable habitat environment would serve as essential information for development decision making. This study estimated the values of endangered mammals' forest habitats through spatialization of habitat services. In doing so, a species distribution model, Maximum Entropy Model (MaxEnt) was utilized for a group of endangered mammals including, mountain goat, wildcat, marten cat, and flying squirrel. To calculate the values per unit area, a benefit transfer method was used based on the point-estimate technique with the best available values estimated previously. The range of discount rate of 3.0 to 5.5 percent was applied taking the notion of social discount rate into account. As a result, the province with the highest values for endangered mammal habitats appeared to be Gangwon, followed by Gyeongbuk and Gyeongnam. The monetary values of the endangered mammal habitats were estimated to be 330 billion to 421 billion won per year.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제22권4호
• /
• pp.37-45
• /
• 2016

Purpose: The purpose of this paper is to analyze a sample of single corridor, pod type and composite type of ICUs in terms of patient visibility, spatial configurations and nurse walking distance focused on Korean cases. Methods: The measures of static visibility were used to quantify the patient visibility (upper third part of the patient bed) from the nurse station. The measure of space programme and area distribution (patient zone percentage, staff zone percentage, circulation zone percentage, corridor length per bed, distance from nurse station (NS) to patient bed and departmental gross square meter (DGSM) per patient bed) were calculated by using AutoCAD and MS Excel programs. In the second step of analysis the values of space distribution were compared among the three type of ICUs as well as the nurse walking distance, DGSM per bed and gross factor. in the third step of analysis regression analysis was conducted for the possible correlation between visibility and space programme and area distribution factors as well as nurse walking distance factors. Results: (1) It was found that on average composite type unit offer highest value of patient visibility followed by pod type, while single corridor type unit offers the minimum value of patient visibility among the three plan typologies. (2) Average patient visibility and DGSM per bed shows a strong positive correlation ($r^2=0.75$) and p=0.026. (3) Average patient visibility and average distance from NS has a strong negative correlation ($r^2=0.78$), and P=0.02. (4) On average composite type unit offer the minimum walking distance from NS (7.22 meter) followed by pod type unit (8.35 meter) and single corridor (9.76 meter). (5) Maximum distance from NS was noted in single corridor (18.19 meter) followed by pod type unit (15.14 meter) and Composite type unit (11.1 meter). Implications: This study may contribute to the visibility analysis of existing and future ICU design in Korea to achieve maximum patient visibility and reduced nurse walking distance.

• The Journal of Advanced Prosthodontics
• /
• 제14권4호
• /
• pp.250-261
• /
• 2022

PURPOSE. The purpose of this study was to analyze the marginal fit of three-unit resin prostheses printed with the stereolithography (SLA) method in two build orientations (45°, 60°) and two layer thicknesses (50 ㎛, 100 ㎛). MATERIALS AND METHODS. A master model for a three-unit resin prosthesis was designed with two implant abutments. Forty specimens were printed using an SLA 3D printer. The specimens were printed with two build orientations (45°, 60°), and each orientation was printed with two layer thicknesses (50 ㎛, 100 ㎛). The marginal fit was measured as the marginal gap (MG) and absolute marginal discrepancy (AMD), and MG and AMD measurements were performed at 8 points per abutment, for 16 points per specimen. All statistical analyses were performed using SPSS software. Two-way analysis of variance (ANOVA) was separately performed on the MG and AMD values of the build orientations and layer thicknesses. Moreover, one-way ANOVA was performed for each point within each group. RESULTS. The margins of the area adjacent to the pontic showed significantly high values, and the values were smaller when the build orientation was 45° than when it was 60°. However, the margin did not differ significantly according to the layer thicknesses. CONCLUSION. The marginal fit of the three-unit resin prosthesis fabricated by the SLA 3D method was affected by the pontic. Moreover, the marginal fit was affected by the build orientation. The 45° build orientation is recommended.

• 농업과학연구
• /
• 제44권3호
• /
• pp.400-408
• /
• 2017

This experiment was conducted to estimate the livestock carrying capacity per unit area of Hanwoo heifer with determine the quality of the forage by evaluating the productivity and nutritive value of spring seeding oats (Avena sative L.) according to different seeding and harvesting timings. Dry matter yields were the highest at 13.62 tons per ha when oat was seeded on March 15 and harvested on June 8 (p < 0.05), while the lowest yield of 6.29 tons per ha was obtained when seeded on February 25 and harvested on May 19 (p < 0.05). The highest crude protein yield of 1.27 tons per ha (p < 0.05) was obtained when seeded on March 5 and harvested on June 8. The total digestible nutrient yield was the highest at 7.38 tons per ha when harvested on June 8, the last harvest of the experiment (p < 0.05). In the northern part of Gyeongbuk province, spring seeding oats at the beginning of March, rather than in the middle of March, showed good annual livestock carrying capacity per unit area. According to harvest timing, the plot harvested on June 8 showed the highest livestock carrying capacity with an average of 6.53 heads (p < 0.05). In conclusion, in the northern part of Gyeongbuk province in spring, it is better to seed oat early in March and to harvest early in June to increase the livestock breeding capacity, considering dry matter productivity and feed value.

• 한국수산과학회지
• /
• 제28권6호
• /
• pp.720-727
• /
• 1995

A Monte Carlo computer simulation study was conducted to determine the most efficient sampling design for the blue crab dredge capture efficiency experiment performed in Chesapeake Bay, Maryland, U. S. A. The input values were the number of dredge tracks in each experimental area, the number of tows per experiment, the number of experiments, the mean density of crabs per unit area, the negative binomial coefficient, the gear capture efficiency, and the tow error. As a result of the study, a four-track experiment with twenty to twenty-eight tows was estimated to be the best in terms of precision and accuracy of the gear capture efficiency.

• 한국작물학회지
• /
• 제34권1호
• /
• pp.60-73
• /
• 1989

수도재배에 있어서 수량은 여러 가지 요인이 복합적으로 작용하여 나타난 반응의 산물이다. 수도의 적정재배조건을 구명하기 위하여 지금까지는 제한된 요인 및 수준에서 시험연구가 수행되어 왔는데, 처리요인수 및 각 요인당 처리수준이 증가될 경우 전체 처리수의 급증으로 시험수행이 어렵게 된다. 본 연구는 이를 극복하고자 조생량 벼 품종 '운봉벼'의 재식주수, 주당본수, 질소시비량, 이앙일, 육묘일수 등 5가지 계량적 재배요인의 최적조건을 구명하기 위한 시험을 수행하고 수량을 Box와 Wilson의 중심합성계획법에 따라 분석하였으며(시험 1), 같은 품종을 공시하여 실험 1과 같은 요인을 Finney의 부분실시법(FFD)과 비교함으로써(시험 2) CCD의 농사시험연구에의 활용가능성을 제시하고자 하였다. 1. 재배조건에 따른 수량반응 수량은 5요인중 4요인의 수준을 중심수준에서 통제하였을 때 각 요인별 최대수량은 중심수준(재식주수, 90수/3.3$m^2$ ; 주당본수, 5본 ; N시비량, 11kg/10a ; 이앙일, 6월 25일 ; 육묘일수, 35일) 부근이었고 각 요인이 양극단수준으로 갈수록 감수하였으며 5요인중 3요인을 중심수준에서 통제하고 난 뒤에 2요인들 간의 상호작용에 의한 수량은 가 수준의 중심부에서 최고치를 보였다. 전체 5개 요인의 상호작용에 의해 나타난 수량의 정상점은 안부점이었다. 2. 두 계획법의 비교 가. CCD에서 수량에 대한 각각의 정상점에서의 재배조건은, 재식주수 107주/3.3$m^2$, 주당본수 4본, 질소시비량 10kg/10a, 이앙일 6월 26일, 육묘일수 33일이었고, 정상점에서의 수량은 439kg/10a으로서 FFD에서의 그것들과 비슷하였다. 나. CCD에 의하면 요인수와 수준수가 많아도 처리조합수를 획기적으로 줄일 수 있었고, 실험재료의 절적, 작업시간의 단축 및 작업의 간편화를 가져왔다. 다. CCD(각 요인별 5수준)는 FFD(각 3수준)에 비하여 수준수가 많았지만 결과를 도해화하기에 편리하였다. 라. 양 계획법에 있어서 수량의 정상점이 안부점인 것으로 보아 요인의 설정시 각 요인 상호간의 이질성을 고려해야 하며, 처리요인의 지나친 증가도 억제되어야 할 것이다. 마. CCD는 극한수준($\pm$2, $\pm$2, $\pm$2, $\pm$2, $\pm$2)의 처리가 없기 때문에 각 요인의 극한수준의 실험영역에 대해서는 적은 정보를 얻었으나. FFD보다는 많은 유익한 정보를 획득할 수 있었다. 따라서, CCD는 획기적으로 처리수를 줄였어도 유익한 정보를 제공하는 것으로 보아, 농사시험연구에 효율적으로 활용할 수 있는 계획적으로 확인되었다.적으로 확인되었다.

• Asian Journal of Innovation and Policy
• /
• 제12권3호
• /
• pp.277-303
• /
• 2023

The importance of ecosystem service such as green spaces has risen due to restrictions on outdoor activities amid the climate crisis and COVID-19. While gardens significantly impact economic development, quality of life, and social well-being, comprehensive studies on their multidimensional values are lacking. This research categorizes garden values into social, cultural, environmental, and health dimensions and proposes an integrated assessment framework that introduces detailed elements and evaluation methods. An empirical assessment of carbon storage index in two Korean gardens, Semiwon and Juknokwon, reveals Semiwon's higher carbon storage per unit area. The proposed framework, emphasizing a quantitative approach, enables cross-national and regional comparisons, contributing to a broader understanding and evaluation of garden values beyond specific facilities.