• 제목/요약/키워드: value gap

검색결과 1,039건 처리시간 0.026초

난류확산화염의 화염구조와 연소특성에 관한 실험적 연구 (An Experimental Study on Flame Structure and Combustion Characteristics of Turbulent Diffusion Flame(III))

  • 장인갑;최경민;최병륜
    • 대한기계학회논문집B
    • /
    • 제20권7호
    • /
    • pp.2326-2336
    • /
    • 1996
  • So most practical combustor is considered to the swirl flame, it is very important to examinate swirl flame structure and combustion characteristics. Recently, attention has been paid to the flame diagnostic by radical luminous intensity. For swirl flame structure and combustion characteristic, reverse flow boundary, temperature, ion current and radical luminous intensity were measured in the double-coaxial swirl combustor which was used principle of multi-annular combustor. This study had three experimental condition, S-type, C-type, SC-type. S-type and C-type flames were formed recirculation zone, but SC-type flame wasn't formed. C-type flame had two recirculation zone. The position with maximum value of ion current and CH-radical, temperature and OH-radical had similarity distribution almost. Therefore, it is possible that the macro structure of flame was measured by radical luminous intensity in the high intensity of turbulent combustion field which was formed by swirl.

싱가포르의 높은 양성평등수준과 TIMSS 2011에 나타난 여학생의 높은 수학성취도 (Singapore's Higher Social Gender Equality and Girls' Higher Mathematics Achievement in TIMSS 2011)

  • 유양석
    • 한국수학교육학회지시리즈A:수학교육
    • /
    • 제56권2호
    • /
    • pp.147-160
    • /
    • 2017
  • The purpose of this study was to examine (1) if sociocultural factors that are known to influence gender gap in mathematics achievement are gender equitable for Singaporean eighth grade students, (2) if there is a higher level of gender equitability in students' attitudes towards mathematics and (3) how sociocultural factors influence mathematics achievement for Singaporean eighth grade students. This study is based on 5,923 Singaporean eighth grade students who participated in TIMSS 2011 assessment. The study found that there were no statistically significant gender differences in 'parental involvement in education' and 'teacher efficacy.' There were no statistically significant gender differences in students' attitudes of 'like learning mathematics,' and 'value learning mathematics'. A significant gender difference was identified for the attitude of 'confident with mathematics.' The boys displayed a higher level of confidence in mathematics than the girls consistent with other study findings for Asian students. The degree of effect from 'parental involvement in education,' 'teacher efficacy,' and 'confident with mathematics' on mathematics achievement are found to be stronger for girls than boys. The finding implies that girls' mathematics achievement can benefit from having more positive encouragement and involvement of parents and teachers and strengthening confidence in mathematics.

자동차용 마찰재에 사용되는 흑연과 마그네시아에 따른 전이막과 마찰특성에 관한 연구 (The Effects of Graphite and Magnesium Oxide in Automotive Friction Materials on Friction and Formation of Transfer Film)

  • 배은갑;윤장혁;장호
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2002년도 제35회 춘계학술대회
    • /
    • pp.226-234
    • /
    • 2002
  • A systematic study of the role of transfer films on friction properties was performed with various temperatures in the brake system. An NAO friction material specimens containing 9 ingredients were tested using a pad-on-disk type friction tester A new method of measuring the transfer film thickness was developed by considering the electrical resistance of the transfer film using a 4-point probe technique. The properties of transfer film such as surface morphology and film distribution vaied according to the relative amount of graphite and magnesium oxide. By using SEM, it was possible to obtain information about the chemical composition of the transfer film. Results showed that there detected a threshold value of the relative amount of a two active materials to maintain a certiain thickness of a transfer film. Results also showed that formation of friction layer generated on the friction surface was strongly affected by chemical action of two ingredients during sliding due to chemical reaction of solid lubricants at different interface temperature. The results suggested that no apparent relationship between transfer film thickness and the average friction coefficient was founded and friction characteristics were affected more by the property of the solid lubricant and abrasive in the material.

  • PDF

하천(河川)의 수질예측(水質豫測)을 위한 수치모형(數値模型)에 관한 연구(硏究) (-A Study on a Mathematical Model for Water Quality Prediction for Rivers-)

  • 김성순;이양규;김갑진
    • 상하수도학회지
    • /
    • 제9권4호
    • /
    • pp.73-86
    • /
    • 1995
  • The propriety of the numerical model application was examined on Paldang resevoir and its inflow tributaries located in the center of the Korean peninsula and the long term water quality forecast of the oxygen profile was carried out in this syduy. The input data of the model was the capacity of the reservoir, catchment area, percolation, diffusion rate, vertical mixing rate, dissolution rate from the bottom of the reservoir, outflow of the resevoir, water quality measurement and meteorology data of the drainage basin, and the output result was the annual estimation value of the dissolved oxygen concentration and the biochemical oxygen demand. The modeling method is based on the measured or calculated boundary condition dividing the water area into several blocks from the macorscopic aspect and considering the mass balance in these blocks. As the result of the water quality forecast, it was expected that the water quality in Northern Han River and Paldang reservoir would maintain the recent level, but that the water quality in the Southern Han River and its inflow tributary would worsen below the grade 4 of the life environmental standard from around 2000 owing to the decrease of DO concentration and the increase of BOD concentration.

  • PDF

Reflectivity Improvement by Particle Neutralization in a Charged Particle-Type Electronic Display

  • Kim, Young-Cho
    • Transactions on Electrical and Electronic Materials
    • /
    • 제14권1호
    • /
    • pp.36-38
    • /
    • 2013
  • Eight sample panels using an indium tin oxide(ITO)-coated glass substrate were fabricated, with barrier ribs formed of 55 ${\mu}m$ height and 10 ${\mu}m$ width. The upper and lower substrates were designed with the same panel condition, so a cell gap of 110 ${\mu}m$ was obtained. The charged particles in a cell consisted of $TiO_2$ (for white color) or carbon black (black color), negative or positive charge control agents, and a polymer. The average diameter of the two types of particles was commonly 10 ${\mu}m$, and their q/m value was -4.5 ${\mu}C/g$ and +4.5 ${\mu}C/g$, respectively. The electrically opposite particles mixed by an agitator were loaded into their cells by a simple particle-loading method. The discharging process proceeded at a humidity of 80% and a temperature of $30^{\circ}C$. Reflectivity was measured depending on discharging time, and a hysteresis curve by bias voltage obtained for comparison between the neutralized and non-neutralized panel, in which the superior optical property of the neutralized panel was ascertained.

영구자석 동기전동기의 약계자제어에 의한 고속 운전 (Field Weakening Control of IPMSM for High Speed Operation)

  • 윤병도;김윤호;김춘삼;이병송;김수열
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 하계학술대회 논문집 A
    • /
    • pp.588-590
    • /
    • 1994
  • This paper describes current controlled PWM technique of IPM synchronous motors for a wide variety of speed control applications. The IPM synchronous motors have a saliency, in which the q-axis inductance is larger than the d-axis inductance. As a consequence, there exists a reluctance torque component Thus when this component is added to the torque component produced by the stator currents and the air-gap flux, IPM motor drives are readily applicable where full torque Is required up to full or base speed. They are however limited in their ability to operate in the power limited regime where the available torque is reduced as the speed is increased above its base value. This paper reviews the operation of the IPMSM drives when they are constrained to be within the permissible envelope of maximum inverter voltage and current to produce the rated power and to provide this with the highest attainable rotor speed. The wide variety of speed control strategy is analyzed and the performance is investigated by the computer simulation using actual parameters of a drive system. Simulation results are given and discussed.

  • PDF

Nitrogen Incorporation of Nanostructured Amorphous Carbon Thin Films by Aerosol-Assisted Chemical Vapor Deposition

  • Fadzilah, A.N.;Dayana, K.;Rusop, M.
    • Transactions on Electrical and Electronic Materials
    • /
    • 제14권4호
    • /
    • pp.165-171
    • /
    • 2013
  • Nanostructured pure a-C and nitrogen doped a-C: N thin films with small particle size of, ~50 nm were obtained by Aerosol-assisted CVD method from the natural precursor camphor oil. Five samples were prepared for the a-C and a-C: N respectively, with the deposition temperatures ranging from $400^{\circ}C$ to $600^{\circ}C$. At high temperature, the AFM clarifies an even smoother image, due to the increase of the energetic carbon ion bombardment at the surface of the thin film. An ohmic contact was acquired from the current-voltage solar simulator characterization. The higher conductivity of a-C: N, of ${\sim}{\times}10^{-2}Scm^{-1}$ is due to the decrease in defects since the spin density gap decrease with the nitrogen addition. Pure a-C exhibit absorption coefficient, ${\alpha}$ of $10^4cm^{-1}$, whereas for a-C:N, ${\alpha}$ is of $10^5cm^{-1}$. The high ${\sigma}$ value of a-C:N is due to the presence of more graphitic component ($sp^2$ carbon bonding) in the carbon films.

환형 배치된 코로나 전극에 의한 이온풍 발생 특성 (The Characteristics of the Ionic Wind Generation with Corona Electrodes Installed in Form of the Ring)

  • 김진규;정재승
    • 조명전기설비학회논문지
    • /
    • 제28권2호
    • /
    • pp.54-59
    • /
    • 2014
  • The electric power can be converted into the mechanical power by a corona discharge system. This way has not stronger force than a electric motor. But it has been applied in various industrial fields because of many advantages, no moving parts, smaller noise, simpler structure, minimizing et al. In this paper, corona discharge system with multiple corona electrode installed in form of the ring, has been studied by focusing on the electrical and mechanical characteristics. Intensity of the corona discharge depends on applied electric field, and electric field is related to the applied voltage, discharge gap spacing(s), distance between each corona electrodes(d). As a result, in the case d/s=0.9, most intensive discharge occurred in this experiments. In the region of d/s<0.9, ionic wind velocity has saturation value in spite of decreasing corona current, because each ion velocities increase by the increasing electric field.

픽셀 값의 컨벡스 성질을 이용한 다노출 영상의 융합 기법 (Fusion of multiple images based on convexity of pixel value)

  • 안재현;국중갑;이상헌;조남익
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 2010년도 하계학술대회
    • /
    • pp.408-410
    • /
    • 2010
  • 본 논문에서는 새로운 척도에 기반한 다노출 영상 융합 방법을 제안한다. 제안하는 방법에서는 각 노출정도에 따른 픽셀값의 그래프가 컨벡스 형태를 갖는다는 성질과 대조 값의 차이를 고려한 MRF (Markov Random Field) 기반의 에너지 함수를 설계하고 그 에너지 함수를 그래프컷 (Graph cut) 으로 풀어 각 노출치 영상에 대한 가중치 맵 (weight map)을 형성한다. 그리고 가중치 맵을 곱한 각 영상을 더함으로써 융합된 영상을 얻는다. 제안한 컨벡스 성질을 기반으로 한 척도는 특정 컬러 성분이 다른 컬러 성분보다 먼저 과노출 상태에 도달 한 경우의 영역을 가중치 계산에서 제외할 수 있기 때문에 기존의 가중치 기반의 방법보다 정확한 가중치 맵을 형성할 수 있게 한다. 실험 결과 제안하는 방법은 기존의 다노출 영상 융합에 비해 보다 넓은 영역에서 원 영상의 정보를 더 잘 표현하는 것을 확인하였다.

  • PDF

Enhanced Cloud Service Discovery for Naïve users with Ontology based Representation

  • Viji Rajendran, V;Swamynathan, S
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권1호
    • /
    • pp.38-57
    • /
    • 2016
  • Service discovery is one of the major challenges in cloud computing environment with a large number of service providers and heterogeneous services. Non-uniform naming conventions, varied types and features of services make cloud service discovery a grueling problem. With the proliferation of cloud services, it has been laborious to find services, especially from Internet-based service repositories. To address this issue, services are crawled and clustered according to their similarity. The clustered services are maintained as a catalogue in which the data published on the cloud provider's website are stored in a standard format. As there is no standard specification and a description language for cloud services, new efficient and intelligent mechanisms to discover cloud services are strongly required and desired. This paper also proposes a key-value representation to describe cloud services in a formal way and to facilitate matching between offered services and demand. Since naïve users prefer to have a query in natural language, semantic approaches are used to close the gap between the ambiguous user requirements and the service specifications. Experimental evaluation measured in terms of precision and recall of retrieved services shows that the proposed approach outperforms existing methods.