• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• v.5 no.5
• /
• pp.659-670
• /
• 2018

The Industrial Internet of Things (IIoT) confronts industrial manufactures with economic, ecological, as well as social benefits and challenges, referring to the Triple Bottom Line of sustainability. So far, research has mainly investigated its dimensions in isolation or economic aspects have not been compared with ecological and social perspectives. Further, research misses studies that are devoted to the special characteristics and requirements of Small and Medium-sized Enterprises (SMEs). This study aims to contribute to close this research gap, providing a research context that encompasses all three dimensions of sustainability. The results are based on data obtained from 329 SMEs, 222 in Germany and 107 in China, therefore allowing for a comparison of the concepts "Industrie 4.0" and "Made in China 2025" in the context of SMEs. In general, German SMEs expect a lower impact through "Industrie 4.0", perceiving the concept as more beneficial for larger enterprises. We further find that Chinese SMEs foremost see social benefits. Challenges whilst introducing "Industrie 4.0"by German SMEs as well as several frame conditions are perceived more relevant than for "Made in China 2025", as seen by Chinese SMEs. The paper closes with implications for research and practice based on these findings.

• Korean Journal of Materials Research
• /
• v.29 no.8
• /
• pp.477-482
• /
• 2019

The magnetic properties and electronic structures of the B20 crystal structure MnGe and MnSi were investigated using the density functional theory with local density approximation. The low symmetry of the B20 crystal structure plays a very important role to make electromagnetic characteristics of these materials. The important result of the calculations is that it can be observed the appearance of a pair of gaps in the density of states near the Fermi level in both compounds. These features are results from d-band splitting by the low symmetry of the crystal field from B20 crystal structure. It can be seen that there is half-metallic characteristics from the density of states in both compounds. The calculation shows that the value of magnetic moment of MnGe is 5 times bigger than that of MnSi even though they have same crystal structure. The electronic structures of paramagnetic case have a very narrow indirect gap just above the Fermi level in both compounds. These gaps acquire some significance in establishing the stability of the ferromagnetic states within the local density approximation. Calculation shows that the Mn 3d character dominates the density of states near the Fermi level in both materials.

• Tribology and Lubricants
• /
• v.36 no.6
• /
• pp.320-323
• /
• 2020

Thin film coatings are commonly exploited to minimize wear and optimize the frictional behavior of various precision mechanical systems. The enhancement of thin film durability is directly related to the performance maximization of the system. Therefore, a fine approach to analyze the thin film wear behavior is required. Archard's equation is a representative and well-developed law that defines the wear coefficient, which is the probability of creating wear particles. A ploughing model is a commonly used model to determine the friction force during the abrasive contact. The equations demonstrate that the friction force and wear coefficient are inversely proportional to the hardness of the material. In this study, Archard's equation and ploughing models are modified with an effective hardness to minimize the gap between the experimental and numerical results. It is noted that the effective hardness is the hardness variation with respect to the penetration depth owing to the substrate effect. The nanoindentation method is utilized to characterize the effective hardness of Cu film. The wear coefficient value considering the effective hardness is more than three times higher than that without considering the effective hardness. The friction force predicted with the effective hardness agreed better with the results obtained directly from the friction force detecting sensor. This outcome is expected to improve the accuracy of friction and wear amount predictions.

• Journal of Korea Trade
• /
• v.25 no.4
• /
• pp.37-59
• /
• 2021

Purpose - Although models of innovation and exporting dominate recent studies of relations between innovation and access to foreign markets, relations between innovation and foreign direct investment (FDI) are less explored. This is especially true of relations between types of innovation and FDI. We fill that gap in the literature with empirical evidence that clarifies whether firms enter foreign markets through exports or FDI. Design/methodology - In order to assess the role of innovation in firms' international engagement strategies, we develop research hypotheses and present new empirical evidence on firms' choice of entry - exports and FDI - based on firm-level data. Findings - Our empirical results suggest that the impact of product innovation is more significant in transition from being a purely domestic firm to an exporter, while process innovation more significantly affect transition from being an exporter to a multinational enterprise. Our results also support 'self-selection into FDI' rather than 'learning-by-performing FDI' in the relationship between innovation and firms' overseas expansion. Originality/value - Recent literature on the relationship between innovation and firms' participation in foreign markets is dominated by models of innovation and export behavior. However, foreign direct investment by multinational enterprises may also be associated with firms' innovative activities. We first analyze how product and process innovations influence firms' choices to initiate exports or FDI.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1081-1088
• /
• 2022

The harmonics of synchronous generators increase iron and copper loss, which is the cause of fever. For harmonic reduction, the armature winding method is used as a distribution winding, a short pitch winding. In this paper, we want to improve the waveform of the instrument voltage by reducing the harmonics in a new way to the shape of the permanent magnet. The method cuts both ends of the permanent magnet and adjusts the air gap by increasing and decreasing the area according to the set value. By varying the distribution of magnetic flux density, the resulting electromotive voltage and strain were compared. This compares the shape-changing models of permanent magnets and shows an effective deformation method.

• Korean Journal of Materials Research
• /
• v.32 no.6
• /
• pp.287-292
• /
• 2022

Magnesium-antimonide is a well-known zintl phase thermoelectric material with low band gap energy, earth-abundance and characteristic electron-crystal phonon-glass properties. The nominal composition Mg_3.8-xZn_xSb₂ (0.00 ≤ x ≤ 0.02) was synthesized by controlled melting and subsequent vacuum hot pressing method. To investigate phase development and surface morphology during the process, X-ray diffraction (XRD) and scanning electron microscopy (SEM) were carried out. It should be noted that an additional 16 at. % Mg must be added to the system to compensate for Mg loss during the melting process. This study evaluated the thermoelectric properties of the material in terms of Seebeck coefficient, electrical conductivity and thermal conductivity from the low to high temperature regime. The results demonstrated that substituting Zn at Mg sites increased electrical conductivity without significantly affecting the Seebeck coefficient. The maximal dimensionless figure of merit achieved was 0.30 for x = 0.01 at 855 K which is 30% greater than the intrinsic value. Electronic flow properties were also evaluated and discussed to explain the carrier transport mechanism involved in the thermoelectric properties of this alloy system.

• Advances in nano research
• /
• v.12 no.4
• /
• pp.415-426
• /
• 2022

Nickel substituted cobalt-zinc ferrite nanoparticles with composition Co_0.5Zn_0.5Ni_xFe_2-xO₄ (x = 0.25, 0.5, 0.75, 1.0) were synthesized using a wet chemical method named citrate precursor method. Various characterizations of the prepared nanoferrites were done using X-ray powder diffractometry (XRD), Scanning electron microscopy (SEM), UV visible spectroscopy and Fourier transform spectroscopy technique (FT-IR). XRD confirmed the formation of cubic spinel structure of the samples with single phase having one characteristic peak at (311). The value of optical band gap (E_g) was found to decrease with Ni substitution and have values in the range 2.30eV to 1.69eV. A Fenton-type system was created by photocatalytic activity using source of visible light for removal of methylene blue dye. Observations revealed increase in the degradation of methylene blue dye with increasing nickel content in the samples. The degradation percentage was increased from 77.32% for x = 0.25 to 90.16% for x = 1.0 in one hour under the irradiation of visible light. Also, the degradation process was found to have pseudo first order kinetics model. Hence, it can be observed that synthesized nickel doped cobalt-zinc ferrites have good capability for water purification and its degradation efficiency enhanced with increase in nickel concentration.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.377-389
• /
• 2022

The current global energy supply depends heavily on fossil fuels. This makes technology such as direct water splitting from harvesting solar energy in photoelectrochemical (PEC) systems potentially attractive due to its a promising route for environmentally benign hydrogen production. In this study, undoped and nickel-doped molybdenum oxide photoanodes (called photoanodes S₁ and S₂ respectively) were synthesized through electrodeposition by applying -1.377 V vs Ag/AgCl (3 M KCl) for 3 hours on an FTO-coated glass substrate immersed in molibdatecitrate aqueous solutions at pH 9. Scanning electron microscopy (SEM), atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) were used for microstructural and compositional characterizations of the photoanodes. In addition, the optical and photoelectrochemical characterizations of these photoanodes were performed by UV-Visible spectroscopy, and linear scanning voltammetry (LSV) respectively. The results showed that all the photoanodes produced exhibit conductivity and catalytic properties that make them attractive for water splitting application in a photoelectrochemical cell. In this context, the photoanode S₂ exhibited better photocatalytic activity than the photoanode S₁. In addition, photoanode S₂ had the lowest optical band-gap energy value (2.58 eV), which would allow better utilization of the solar spectrum.

• Journal of Distribution Science
• /
• v.20 no.9
• /
• pp.47-59
• /
• 2022

Purpose: This study aims to analyze a triangulation model: 1) the effect of entrepreneurship education (EE) on entrepreneurship knowledge (EK) and entrepreneurship mindset (EM) and 2) the effect of EK on EM. Entrepreneurship education is a medium and pedagogical tool to cultivate EK and EM with the purpose enhancing of students who will be interested in entrepreneurial activities. Knowledge of adequate entrepreneurship is a stimulus strategic tool to develop the entrepreneurial mindset of students. Research design, data, and methodology: There were 278 respondents from Business and Non-Business both Indonesian and Malaysian students. The research design was quantitative and evaluated three hypotheses by PLS-SEM using WarpPLS v.7 software. Statistic descriptive for respondent used SPSS IBM v.26. Results: The results showed that the three hypotheses had supported with a significant level of p-value < 0.001. It's meant EE enhanced both EK and EM. Furthermore, increasing EM was not only by EE, but also EM could be increased through EK. Conclusions: The novelty of this research contributes to filling the knowledge gap in the development of pedagogy in the pursuit of entrepreneurship using a triangulation model of the relationship among EE, EK, and EM.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.429-434
• /
• 1996

K-REM［1］, which is under development as a realistic evaluation model of large break LOCA, is applied to the analysis of cold leg guillotine break of Ulchin 3&4. Fuel parameters on which statistical analysis of their effects on the peak cladding temperature (PCT) are made and system parameters on which the concept of limiting value approach (LVA) are applied, are determined from the single parameter sensitivity study. 3 parameters of fuel gap conductance, fuel thermal conductivity and power peaking factor are selected as fuel related ones and 4 parameters of axial power shape, reactor power, decay heat and the gas pressure of safety injection tank (SIT) are selected as plant system related ones. Response surface of PCT is generated from the plant calculation results and on which Monte Carlo sampling is made to get plant application uncertainty which is statistically combined with code uncertainty to produce the 95th percentile PCT. From the break spectrum analysis, blowdown PCT of 1350.23 K and reflood PCT of 1195.56 K are obtained for break discharge coefficients of 0.8 and 0.5, respectively.