• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.4
• /
• pp.523-531
• /
• 2008

Buffalo are a major source of milk production, contributing 12.1% in the World and 38.0% in Asia. The buffaloes are kept under peri-urban farming systems to produce milk for urban populations. Breeding is delayed in these herds to get more economic benefit because farmers believe that the pregnancy decreases milk production. The lactation milk value has been studied in this paper as an economic indicator. Complete milk yield records of 3,304 buffaloes was collected from a group of state farms. Economic traits including lactation yield, lactation length, calving interval (CI), dry period and milk yield per day of calving interval (MYPDCI) were derived from the data. The animals were grouped according to parity number (1-3), service period (G1 to G4, conceiving during <150, 150-200, 200-300 and >300 days post calving) and yield levels (HMY>2,500; MMY 2,001-2,500; and LMY 1,500-2,000 liters/ lactation). To study the effect of pregnancy on milk composition a research trial was conducted at a medium size private dairy farm, using forty lactating buffaloes of three yield levels and four service period groups, as described already. Milk was sampled on alternate weeks and analyzed for fat and protein contents (%). For quantifying the value of milk produced during a lactation period, the value corrected milk (VCM) was determined and converted to lactation milk value (LMV). Group means were compared for varicous parameters. Highest milk yield ($2,836.50{\pm}15.68$ liters/lactation) was recorded in the HMY animals of G4 group while lowest milk yield of $1,657.04{\pm}8.34$ liters/lactation was found in LMY of G1. Lactation was significantly increased with the extending of service period. The shortest dry period was recorded in HMY, parity 1, G1 animals and the longest in parity 2, MMY, G4.The CI was shortest in HMY, parity 1, and G1 animals and longest in LMY, parity 3, G4 buffaloes. The HMY, parity 2, G1 buffaloes showed the highest MYPDCI and the lowest value was recorded ($6.53{\pm}0.17$ vs. $2.76{\pm}0.04$ liter/day) for LMY, parity 1, G4 buffaloes. The VCM decreased with the delayed conception. This decreasing trend was higher in respect of the total yield but decrease in the VCM was smaller due to the increasing levels of fat and protein in the milk. The gap between the various production classes was reduced based on the VCM as compared with the yield per day of CI. LMV showed a consistent decline with extending service period in all three production groups. The study suggests that CI increased with delayed conception, showing a consistent trend in the low, moderate and high yielding buffaloes. There was a coherent declining pattern of milk yield with delaying conception, associated with prolonged CI. An animal conceiving at a later stage of lactation showed a decline in financial returns of 24 to 27% compared with those conceiving earlier.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.191-202
• /
• 2006

Recently the market environment surrounding business firms has been remarkably changed due to the increasing variety of consumption value and taste. On account of technological gap becoming narrower among business firms, the most important thing is for the soft value, such as that of emotional and subjective factors, in order for business firms to be able to create such strategic positioning, for which business firms should first look carefully into latent needs and values of the consumers. Since such products possessing those factors are able to supply the consumers with an appropriate value in attractive forms and meanings, new product development for the valuable products initiates a very important strategic action for securing the strategic positioning. The purpose of this paper is to study the strategic position and role of design in new product development strategy. Design has become the momentous competence of an enterprise in the most recent. Design performs its strategic role as a bridge between a business firm and the consumers. Consumers perceive value added by their purchase of products with attractive designs offered by business firms and, then, satisfy their emotional and subjective value with the products. This study, however, reviewed a new angle on the role of design as an implement for discovering consumers' latent needs and values which could be main factors for obtaining the strategic positioning. In other words, this study intended to suggest a new strategic role of design as value suppliers in new product development strategy for firms formulating and implementing their business strategies. For the new angle on the role of design, this study discussed a new approach of design strategy and intended to formulate its system first. And then, it suggested a general idea for strategic design analysis and its methodology, ethnography, as a strategic value creator. Finally, the suitability and usefulness of strategic design analysis for new product development strategy was discussed.

• Journal of Technology Innovation
• /
• v.28 no.4
• /
• pp.127-150
• /
• 2020

The World Health Organization (WHO) declared the third pandemic in history after the Hong Kong flu and swine flu. The outbreak of Corona 19 dramatically reduced exchanges between countries, while rapid contagion created a time gap in economic fluctuations by country. In January 2020, the trade dispute between the US and China entered into a consensus phase, but the economic decoupling phenomenon caused by Corona 19 made it difficult for China to balance trade with the US and made it difficult to comply with the terms of the trade dispute agreement between the US and China. President Trump attributed the responsibility for the spread of Corona 19 to China, and pointed out that the cause of the economic downturn was the infringement of Chinese trade secrets and illegal copies, and protectionism arose. As a result, China protested fiercely, and the conflict with the United States deepened. The US has declared trade sanctions on Huawei and SMIC, which are key companies in China's semiconductor industry, and is predicting the risk of a disconnection of the semiconductor value chain between the US and China. The separation of the value chain of the semiconductor industry has the potential to have a big impact on the semiconductor industry, a structure that is highly specialized and monopolized by certain countries and companies in the value chain. This paper aims to deal with the risk of disconnection in the semiconductor value chain between the US and China reignited by Corona 19, the impact and change of the global semiconductor industry value chain, and the response strategies of Korean semiconductor companies.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.565-572
• /
• 2001

The spatial genetic structure of Needle fir(Abies holophylla Max.) seedlings on forest gap within a Needle fir forest at Mt. Odae in Korea was analyzed on the basis of ISSR(inter-simple sequence repeats) marker analysis. The gap size was $1,500m^2(50m{\times}30m)$, and we sampled 416 one- or two-year-old seedlings by 2m intervals. Some trees at the upper crown layer except Needle firs and all trees at the middle and lower crown layers were removed, and Needle firs at the upper crown layer showed very weak growth strength or to be withering to death. The results of spatial autocorrelation using 31 polymorphic ISSR markers revealed that it was genetically homogeneous within spatial distance of 15.6m and the randomness of genetic distribution was from 15.6m to 31.2m. The genetic patch size of seedlings in forest gap might be restricted by the density of mother trees, making allow for the average height of adult Needle firs, the seed dispersal area, and the average distance between adults. For the directionality of seedling distribution, we investigated the variography using 'genetic configuration' which was the value of configuration in Multidimensional Scaling by genetic distance. In directional variogram, the increment of spatial distance from East to West direction was inversely proportional to genetic homogeneity. We presumed that this anisotrophy of seedling distribution at this forest gap resulted from the directionality of seed dispersal rather than the difference of fecundity between mother trees or the microhabitat variation, taking the evenness of forest floor condition, a vast seed production and the random distribution of seedlings at the studied site into consideration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.206-211
• /
• 2018

Purpose: Recently, a method of forming a slot in the prosthesis lingual has been introduced to solve the occlusal and aesthetic disadvantages of screw-retained prosthesis in the manufacture of implant-fixed prosthesis and to ensure retrievability in cement retained prostheses. The purpose of this study is to investigate the effect of the internal gap on the removal of the prosthesis in the preparation of cement-retained implant prostheses with lingual slots. Materials and methods: Titanium abutment and internal gap of the zirconia prosthesis to be attached to the upper part were set to 30, 35, and $50{\mu}m$, respectively. Three for each type total 15 were produced for each type. The zirconia prosthesis formed a retrievable cement-type slot with a space of 1 mm at the location where the titanium abutment meets the shelf area. Autocatalytic resin cement was used for bonding of abutment and zirconia prosthesis, and the maximum removal stress value was measured in units of Ncm by using the customized equipment of the cemented specimen. The Kruskal-Wallis test was used to compare the three groups by statistical analysis (${\alpha}=.05$), modified by post hoc test the Mann-Whitney U-test and the Bonferroni correction method were used to compare the two methods (${\alpha}=.017$). Results: There was no statistically significant difference in removal stress between the $30{\mu}m$ group and the $35{\mu}m$ group in the internal gap (P = .032), and there was a significant difference between the $30{\mu}m$ group and the $50{\mu}m$ group, between the $35{\mu}m$ group and the $50{\mu}m$ group (P < .017). Conclusion: Thus, the internal gap of computer-aided design affected the retention between the zirconia prosthesis and the titanium abutment.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.3
• /
• pp.13-19
• /
• 2012

Recently, as the importance of the interior noise in a ship cabin has risen, ship builders have becomeconcerned about the use of noise reduction panels to reduce cabin noise. The results of previous researches have been based on analytical and experimental methods using simple sandwich panels. However, panel structures are becoming more complex to improve the transmission loss. Thus, researches that analyze the transmission loss of a panel are reaching the limit of study. This paper reports on research that was performed to determine the sound transmission characteristics of multi-complex panels applicable to high value-added vessels. It presents comparisons between analytical methods and experimental results by using a mini-reverberant chamber with components of sound attenuation panels, including the core and surface materials. The sound transmission loss of multi-complex panels are also analyzed in terms of the influences of the inside perforate plates and air gap thickness on the attenuation. Finally, the multi-complex panel with the highest noise attenuation is proposed based on the analysis results and experimental results in mini-reverberant chamber, which wereverified using a real-size reverberant chamber.

• Current Photovoltaic Research
• /
• v.7 no.4
• /
• pp.103-110
• /
• 2019

Cu(In,Ga)₃Se₅ (β-CIGS) has a band gap of 1.35 eV, which is an optimum value for high solar-energy conversion efficiency. The effects of Cu and Ga content on the cell performance were investigated previously. However, the effect of Se content on the cell performance is not well understood yet. In this work, β-CIGS films were fabricated by three-stage co-evaporation of elemental sources with various Se fluxes at the third stage instead of at all stages. The average composition of five samples was Cu_1.05(In_0.59,Ga_0.41)3Se_y, where the stoichiometric y value is 5.03 and the stoichiometric Se/metal (Se/M) ratio is 1.24. We varied the Se/metal ratio in a range from 1.18 to 1.28. We found that the best efficiency was achieved when the Se/M ratio was 1.24, which is exactly the stoichiometric value where the CIGS grains on the CIGS surface were tightly connected and faceted. With the optimum Se/M ratio, we were able to enhance the cell efficiency of a β-CIGS solar cell from 9.6% to 12.0% by employing a Na₂S post deposition treatment. Our results indicate that Na₂S post deposition treatment is very effective to enhance the cell efficiency to a level on par with that in α-CIGS cell.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.4
• /
• pp.587-597
• /
• 1998

In this study, the Periotest value was measured with Periotest to evaluate precision fit of the 2-unit and 3-unit implant-supported prosthesis by modifying the size and location of ill-fitted conditions. The 2-unit prosthesis was fabricated with the right implant fitted incorrectly and the 3-unit prosthesis with the right and center implant fitted incorrectly. To evaluate the effects of the ill-fitted sizes, 4 groups were divided.:The control group being the accurately fabricated sample group fitted properly. Group 1 was constructed with $40{\mu}m$ ill-fitted conditions, group 2 with $70{\mu}m$ and group 3 with $100{\mu}m$ ill-fitted conditions. The Periotest value was measured at each implant site after tightening 10Ncm. The result was follows : 1. The PTV on the ill-fitted area in the 2-unit implant-supported prosthesis increased as the ill-fitted conditions increased. There was a statistically significant difference among groups(p<0.05). In the same ill-fitted sample, the PTV depending on the measured location demonstrated a statistically significant difference (p<0.05) 2. The PTV on the ill-fitted area of the 3-unit implant-supported with an ill-fitted condition in the right implant increased as the ill-fitted conditions increased. There was a significant difference among groups (p<0.05). In the same ill-fitted sample, the PTV depending on the measured location demonstrated a statistically significant difference (p<0.05). 3. In the 3-unit implant-supported prosthesis with ill fitting conditions in the center implant, the PTV on the ill-fitted area demonstrated a statistically significant difference between the control group, group 1 and group 2 (p<0.05). In the same ill-fitted sample, the PTV depending on the measured location demonstrated significant difference between the gap side and the adjacent side with over $70{\mu}m$ ill-fitted conditions (p<0.05). The results suggest that Periotest is a valuable objective method for evaluating the precision fit of an implant superstructure.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.12
• /
• pp.1981-1985
• /
• 2005

Kinetic studies have been performed for alkaline hydrolysis of a series of [(methoxy)(p-substituted styryl)carbene]pentacarbonyl chromium(0) complexes ($(CO)_5$Cr=$C(OCH_3)CH=CHC_6H_4X$, X = p-$OCH_3$, p-$CH_3$, H, p-Cl, p-$NO_2$). Second-order rate constants $(k_{{OH}^-})$ for the alkaline hydrolysis in 50% acetonitrile-water(v/v) were determined spectrophotometrically at various temperatures. At a low pH region (pH < 7.5), the observed rate constant $(k_{obs})$ remained constant with a small value, while in a high pH region (pH > 9.5), $k_{obs}$ increases linearly with increasing the pH of the medium. The second-order rate constants $(k_{{OH}^-})$ increase as the substituent X changes from a strong electron donating group to a strong electron withdrawing group. The Hammett plot obtained for the alkaline hydrolysis is consisted of two intersecting straight lines. The nonlinear Hammett plot might be interpreted as a change in the rate-determining step. However, the fact that the corresponding Yukawa-Tsuno plot is linear with $\rho$ and r values of 0.71 and 1.14, respectively indicates that the nonlinear Hammett plot is not due to a change in the rate-determing step but is due to ground-state stabilization through resonance interaction. The positive $\rho$ value suggests that nucleophilic attack by $OH^-$ to form a tetrahedral addition intermediate is the rate-determining step. The large negative ${\Delta}S^\neq$ value determined in the present system is consistent with the proposed mechanism.

• International Journal of Automotive Technology
• /
• v.6 no.4
• /
• pp.323-332
• /
• 2005

A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at the spark electrode gap and the combustion characteristics of a homogeneous charged methane-air mixture under various overall charge pressures, excess air ratios and ignition times. The flow characteristics, including the mean velocity and turbulence intensity, were analyzed with a hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer, a flame propagation image acquired by ICCD camera and exhaust emissions measured by 2-valve gas chromatography were used to investigate effects of initial pressures, excess air ratios and ignition times on the combustion characteristics. It was found that the mean velocity and turbulence intensity had the maximum value around 200-300 ms and then decreased gradually to a near-zero value after 3000 ms and that the combustion duration was shorten and the flame speed and laminar burning velocity had the highest value under the condition of an excess air ratio of 1.1, an overall charge pressure of 0.15 MPa and an ignition time of 300 ms in the present study. The $CO_2$ concentration was proportional to the ignition time and overall charge pressure, the $CO_2$ concentration was proportional to the excess air ratio, and the UHC concentration was inversely proportional to the ignition time and overall charge pressure.