• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1545-1546
• /
• 2008

In this study, an image processing method with FRANSAC(Fuzzy RANSAC) is presented and discussed for the development of a microscopic gap measuring algorithm. Many problems in edge detection processing are mainly occurred by the illumination system. A serious problem is that the edge set of gap could include the error elements that have relatively larger error than normal. This problem leads to a incorrect measurement of gap. We present a gap measuring algorithm using FRANSAC[1] that is a representative robust estimation algorithm. FRANSAC is peformed by first categorizing all data into good sample set, bad sample set and vague sample set using a fuzzy classification and then sampling in only good sample set. Experimental results show that the presented gap measuring algorithm gives a higher accurate value of gap especially for the more noisy image data.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.46
• /
• pp.167-172
• /
• 1998

Under serious inflation, there has been a considerable gap between book value and market value. To improve this gap, asset revaluation has been implementing in Korea. This paper investigates firms' motives of asset revaluation. The result of empirical tests may be summarized as follow : The corporations listed in Korea Stock Exchange revaluate their assets in order to borrow money owing to good financial structures. Based on this result, the asset revaluation law would be necessary to review.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.233-238
• /
• 2014

Purpose : The Varian's Eclipse radiation treatment planning system is able to correct radiation treatment thought leaf gap which is limitation MLC movement for collision with both MLC. In this study, I'm try to analyze dosimetric effect about the leaf gap in treatment planning system. And then apply to clinical implement. Materials and Methods : The Elclipse version is 10.0. In general, the leaf gap set to 0.05~0.3 mm and must measurement each leaf gap. The leaf gap measured by each LINACs and photons. We applied to measured each leaf gap in IMRT and VMAT. Changing the leaf gap, we evaluated treatment plans by Dmax, CI, etc. Results : When the same plan was evaluated with changing the leaf gap, an increase of 2-5% over the value Dmax, CI increases mm to 0.0~0.50 mm leaf gap. Volumetric modulated and intensity modulated radiation therapy plans all showed the same trend was not found significant between each radiation treatment planning. Conclusion : Generally, the leaf gap setting has a unique measure of the Multileaf collimator. However, the aging of the Multileaf collimator, calibration, and can be changed, after inspection and repair of the lip gap should eventually because these values affect the treatment plan must be applied to the treatment after confirmation. In some cases, may be to maintain the initial setting value of the lip gap, which is undesirable because it can override the influence on the treatment plan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.918-923
• /
• 2008

We proposed an embedded capacitor with the unique electrode structure, which electrodes are located on the same plane and dielectric gap was formed by electrodes. We named it 'Gap type EC', and it was analyzed by the FEM(Finite element Method) program tool. The resonant frequency of Cap type EC was obtained at more higher frequency region. Also, resonant frequency was changed with the magnitude and thickness of electrodes. The Gap type EC with the dielectric gap of $50{\mu}m$ showed capacitance density of $55pF/cm^2$. This value is the higher than that of conventional EC. So, we concluded that the Gap type EC can be a good candidate for high frequency decoupling.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.2
• /
• pp.49-54
• /
• 2002

Most single-Phase brushless DC (BLDC) motors have unequal air gap to eliminate the dead-point where the developed torque value is zero. However this partial increase of the air gap deteriorates the motor characteristics in cogging torque. Thus in this paper a new topology of unequal air gap is proposed to solve this problem. The topology is to use some pairs of equal or unequal air gaps. As a result, it is proved by the finite element analysis and experimental results that the single-Phase BLDC motor with the proposed air gap topology is very effective in reducing the cogging torque.

• Journal of the Korean Geographical Society
• /
• v.49 no.4
• /
• pp.509-524
• /
• 2014

The purpose of this study is to research on the distribution and correlation of population, industrial employees and highest land value of Seoul. The followings are result of the study. First, the population of Seoul City in 2012 decreased by 0.3%, compared with that in 1996. While the population of Gangbuk decreased, that of Gangnam increased. Second, the number of industrial employees showed larger gap than population, and it showed larger regional gap on producer service. Third, Jung-gu in Gangbuk had the highest land value among commercial areas of Seoul, but there was no significant gap between Gangbuk(Jung-gu and Jongro-gu) and Gangnam(Seocho-gu and Gangnam-gu). Fourth, in the average of the highest land value of residential area of Seoul City, Gangnam was more expensive, because of facilities and living conditions of Gangbuk and Gangnam is big difference. Fifth, the regional gap of the highest land value and the lowest land value of Seoul City is commercial areas larger than residential area. Finally, there was no correlation between the distribution of population and land value, between the increase of population and that of land value, but there was positive correlation between the distribution of industrial employees and the highest land value of commercial area and residential area of Seoul City.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.2
• /
• pp.174-179
• /
• 2005

We have designed a novel single cell gap transflective display associated with dual orientation of the liquid crystal. Owing to hybrid alignment in reflective part, the effective cell retardation value becomes half of cell retardation value in transmissive part where the LCs are homogeneously aligned. This study shows the possibility to manufacture the transflective display with a single gamma curve for reflective and transmissive region. The new device shows a high image quality with relatively easy fabrication.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.693-699
• /
• 2011

The outermost SG tubes have more structural problems than inside tubes. Many studies have used a uniform added mass coefficient for all of the SG tubes during the FIV analysis. The purpose of this study is to find out the added mass coefficients for each tube in a cylindrical shell. When a number of tubes are increased, added mass coefficients are also increased. And added mass coefficients at outermost tubes are less than those of inside tubes. According to gap changes between outermost tube and cylindrical shell, added mass coefficients are decreased with increasing the gap. When the gap has very large value, it shows that the added mass coefficient is asymptotically converged to the value of the tube array in a free fluid field.

• 전기의세계
• /
• v.25 no.1
• /
• pp.87-94
• /
• 1976

The characteristic of flashover electric discharge has been brought to light in this paper for the situation in which the space and creeping gaps are laid out in series. The result of this study has disclosed the facts that the over all flashover characteristics have three kind of features such as unilateral increase after increase, and increase after decrease in compliance with varied layout method and relative magnitude of gap length, and accordingly there exist a ratio among the magnitudes of gap length and a proper layort method through which the over all flashover voltage reaches the highest. Also involved with this study is the theoretic analysis of flashover characteristics even in the case of creeping electric discharge from hand tip of the gauge, where the over all value of flashover voltage can be estimated from the peculiar value of flashover voltage and flicker voltage for the space and creeping gap within the extent of 5% error.

• Journal of Welding and Joining
• /
• v.22 no.6
• /
• pp.19-24
• /
• 2004

The laser welding and its analysis of thin-sheet carbon steels were carried out with high power $CO_{2}$ laser. The main factor of weld quality of laser welding is gap and edge quality. This work was preformed to focus on the gap tolerance problem during laser welding. First, bead on plate welding of thin sheet was examined to investigate the effect of laser welding variables, and to obtain optimum welding condition. Butt welding was also carried out to show the effect of gap on the laser weldability of thin sheet. In order to investigate the effect of gap on formability of welded thin sheet, LDH test was caried out. At high welding speed, the partial penetration was obtained by low heat input. Otherwise, porosity was formed in the bead at low weld speed because of too much heat input. The optimum welding condition of welding was derived from bead width, penetration and hardness property. The maximum gap tolerance on laser welding was observed to be about 0.2mm. This gap size has good relationship with beam size of laser spot(about 0.3mm). The formability of welded sheet was about $80{\%}$ value of base metal and the gap size has not affected on the formability, although weld quality is dependent on the gap size.