• Title/Summary/Keyword: value circulation

Search Result 327, Processing Time 0.028 seconds

Upcycling strategies for waste electronic and electrical equipment based on material flow analysis

  • Yi, Sora;Lee, Hisun;Lee, Jeongmin;Kim, Woong
    • Environmental Engineering Research
    • /
    • v.24 no.1
    • /
    • pp.74-81
    • /
    • 2019
  • Upcycling generally refers to the conversion of waste materials to something useful or valuable and is a useful concept that can be applied not only to the waste design industry but also to waste recycling and resource circulation. Our study highlights upcycling as the key concept for improving the value of waste by redefining the concept as "the recycling of waste materials and discarded products in ways that enhance their value." Four upcycling strategies are linked to material flow analyses conducted on waste electronic and electrical equipment, specifically waste refrigerators and waste computers, to examine the technologies available for implementation and suggest guidelines for the promotion of upcycling. The amount of waste refrigerators collected by the formal sector was 121,642 tons/y and the informal sector, 63,823 tons/y. The current recycling ratio of waste refrigerators was estimated as 88.53%. A total of 7,585 tons/y of waste computers were collected by the formal sector and 3,807 tons/y by the informal sector after discharge. Meanwhile, the current recycling ratio of waste computers was estimated as 77.43%. We found that it is possible to introduce 28 upcycling technologies in the case of refrigerators, and 15 technologies are available to promote upcycling in the case of computers. By refining the broad concept of upcycling and looking at the stages of material flow, our approach presents universally applicable directions for incorporating upcycling in resource recovery and recirculation plans.

A Study on the Quality Control for the Circulation Steps including Productipn, Transportation, Selling about Hamburger & Sandwich in Convenience Store (편의점에서 판매되는 햄버거와 샌드위치의 유통과정중 품질관리에 관한 연구)

  • Kim, Heh-Young;Song, Yong-Hye
    • Journal of the Korean Society of Food Culture
    • /
    • v.11 no.4
    • /
    • pp.465-473
    • /
    • 1996
  • The purpose of this study was to evaluate microbiological hazards in the steps of production, transportation and selling of hamburger and sandwich that were marketed in CVS, then to identify methods of control. The reasults are as follows: As the reasult of operation surroundings of manufacturerand reserch of circulation, $4{\sim}6$ hours are needed from manufacturer to CVS. Also transportation car mean temperature was $10^{\circ}C$ which exceeds the standard of $7^{\circ}C$ or below. Hamburger: Critical control points identified were purchasing, cooking, post-preparation, transportation and holding at CVS. As the reasult of microbial analysis following the case of holding methods and reheating at CVS, microbes of cold holding and reheat after cold holding was within standard value. But in the case of room temperature microbes exceeded standard value. Sandwich: Critical control points identified were purchasing, cooking, post-preparation, transportation and holding at CVS. As the reasult of microbial analysis following the case of holding methods and reheating at CVS, total plate counts of cold holding and reheat after cold holding was within standard value. But in the case of room temperature holding after 24 hours total plate counts exceeded standard value. In the case of room temperature holding the number of microbes increased according to the passage of time. As a reasult of food poisoning bacteria, it was negative in every test in sample against V. parahaemolyticus, Salmonella, S. aureus.

  • PDF

Application Design of FlyingDisc with GPS and Gyro Sensors (GPS와 자이로센서를 결합한 플라잉 디스크의 활용설계)

  • Kang, Kyungmo
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2015.05a
    • /
    • pp.517-518
    • /
    • 2015
  • In this research, the application of GPS and Gyro sensor based FlyingDisc with the value of 3D position and circulation sensors was proposed for school physical education. 3D Unity for 3 dimensional expression of sensors was applied for the 3D position and circulation direction from the FlyingDisc.

  • PDF

An Investigation of Large-Scale Climate Indices with the influence on Temperature and Precipitation Variation in Korea (한반도 기온 및 강수량 변동에 영향을 미치는 광역규모 기후지수들에 대한 고찰)

  • Kim, Yeon-Hee;Kim, Maeng-Ki;Lee, Woo-Seop
    • Atmosphere
    • /
    • v.18 no.2
    • /
    • pp.83-95
    • /
    • 2008
  • In this study we have investigated the preceding eighteen large-scale climate indices with a lead time from zero to twelve months that have an influence on the variability of temperature and precipitation in Korea in order to understand which climate indices are overall available as predictors for long-range forecasting. We also have studied the dynamic link between preceding large-scale climate indices and regional climate using singular value decomposition analysis (SVDA) and correlation analysis (CA). Based on the coupled mode between large-scale circulation and regional climate, and correlation pattern between the preceding large-scale climate indices and large-scale circulation, the level of significance on climate indices as a predictor for monthly mean temperature and precipitation was evaluated for 5 and 1% level.

Analysis of Consumer Behavior on Using Food Label (식품표시에 대한 소비자 행동연구)

  • 이경희
    • Journal of the Korean Home Economics Association
    • /
    • v.34 no.5
    • /
    • pp.235-248
    • /
    • 1996
  • The purpose of this study was to search for new food labeling system that would support effective consumer decision-making, by examining consumer behavior of food labels and its' related factors. The survey was conducted on 410 housewives under 60-year-old who live in Seoul or Metropolitan area, using questionnaires and the illustrated material of labels. Respondents generally considered food labels very important as devices. Among 12 items of label which are required to disclose, they evaluated circulation period, and nutritional information. Among 12 items of label, housewives read manufacture date, circulation period, and price more often than business admission number and self standard number. The respondents preferred the format of marking both manufacture date and expiration date on the same side, the format of printing both price and weight on the same side of package, the diagramatic type, and the format represented by ration graph per daily value.

  • PDF

Experiments on a Regenerator with Thermosyphon for Absorption Heat Pumps (기포 펌프를 적용한 흡수식 열펌프용 고온 재생기의 작동 특성 실험)

  • Park, C.W.;Jurng, J.;Nam, P.W.
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.8 no.4
    • /
    • pp.463-472
    • /
    • 1996
  • Experiments were carried out to study the operation characteristics of a regenerator with a thermo-syphon pump and a surface-flame burner for a lithium bromide (LiBr)-water absorption heat pump. A cylindrical-shape metal-fiber burner and commercial grade propane were used. The emission of carbon monoxide and nitric oxide was measured by a combustion gas analyzer. Ther regeneration rate of water vapor as a refrigerant was measured. It could be as a reference value showing the performance of the regenerator. The circulation rate of the LiBr-water solution was also measured from both the tanks for the weak-and the strong-solution. Using a refractometer, the LiBr concetration in the solution was calculated from the measured refractory index of the solution. Temperature of the solution and the condensed water was recorded at several points in the experimental apparatus with thermocouples, using a personal computer. This data collecting system for measuring temperature was calibrated with a set of standard thermometers. The generating rate of water vapor as refrigerant increased linearly with heat supplied. It was about 4.0g/s with the heat supplied at a rate of 16,500kcal/h. The circulation rate of LiBr solution also increases with the heat supplied. The difference in LiBr concentrations between the weak and the strong solution was in the range of 1 to 5% when the concentration of the strong solution was about 60%. It was dependent upon both the heat supplied and the circulation rate of the solution. The initial concentration and the level of the LiBr solution in the regenerator were measured and recorded before experiments. The effect of them on the generating rate of water vapor and the circulation rate of the solution was also studied. The generating rate of water vapor was not strongly dependent upon both the level of the LiBr solution and the initial LiBr concentration. However, the concentration difference of the solution increases with the initial level of the LiBr solution.

  • PDF

A clinical study of acute respiratory failure following open heart surgery (개심술후 급성 호흡부전에 관한 임상적 고찰)

  • Lee, Jae-Seong;Kim, Gyu-Tae
    • Journal of Chest Surgery
    • /
    • v.17 no.3
    • /
    • pp.409-417
    • /
    • 1984
  • In the early days of open heart surgery, acute respiratory failure following extracorporeal circulation was a significant deterrent to an uncomplicated recovery. Although a marked improvement in prevention and treatment of postoperative respiratory failure has been achieved, the problem has not been completely eliminated and continues to be a causative factor in morbidity and mortality Fates following open heart surgery. We have attempted to evaluate postoperative respiratory failure in patients undergoing cardiac operation with the aid of extracorporeal circulation. Our series comprised 92 patients who underwent elective open heart surgery at the Department of Thoracic and Cariodvascular Surgery, School of Medicine, Kyungpook National University, from January, 1980 to December, 1982. In our study, the overall incidence of acute respiratory failure following open heart surgery was 18.8 percent. The duration of extracorporeal circulation in a series of 18 patients who developed postoperative respiratory failure [Group B] was longer in the mean value [120.3 minutes] than the uncomplicated 74 patients [Group A] [85.8 minutes]. The duration of artificial ventilation after open heart surgery in Group A averaged 13.4 hours as contrasted with 76.5 hours in Group B. In Group B, the inspired oxygen concentration [FiO2] in artificial ventilation was continued in the higher level than Group A until 18 hours after operation. Upon pulmonary function test performed pre-and postoperatively, residual volume[RV], RV/TLC and FEV 1.0/FVC were remained essentially unchanged following extracorporeal circulation, whereas forced vital capacity [FVC], FEV 1.0 and FEF 25-75% were significantly decreased in the early postoperative days. The incidence of acute respiratory failure was significantly higher in a series of patients who developed postoperative complications, such as re- exploration due to massive bleeding, low cardiac output, acute renal failure and arrhythmias. A total of 9 patients died, giving an overall mortality was 33.3 percent whereas the mortality was only 1.1 percent for patients without respiratory failure.

  • PDF

Analysis of Isolation, Connection and Circulation with the Neighborhood park in Daegu

  • Ryu, Yeon-Su;Ra, Jung-Hwa;Cho, Hyun-Ju;Kim, Jin-Hyo;Kwon, Oh-Sung
    • Current Research on Agriculture and Life Sciences
    • /
    • v.30 no.1
    • /
    • pp.13-25
    • /
    • 2012
  • Major and reckless development which have been continued during the last half century, have caused decrease and damage of urban green spaces in the point of qualitative and quantitative view. Particularly, it brought about reduction to urban neighborhood park which has taken the main role for landscape ecological value. Recently, neighborhood park planning based on the landscape ecological results has been increasing gradually. Most of all, diverse attempts such as the application of shape character analysis and the step of landscape ecological planning in urban park planning have been proposed. Today, we recognize the importance of comprehensive approach in urban green planning and neighborhood park planning, but landscape ecological approach which is analyzing character and making proposal with isolation, connection and circulation is still insufficient. Most of neighborhood parks in Korea are surrounded by buildings and isolated from adjacent green spaces. Besides, these parks have landscape ecological problems such as reduction of size, isolation from adjacent green spaces, decline of nature, and excessive pavement which we ignored during urban development process. We have sympathy for understanding landscape ecological characters and considering improvement proposals for neighborhood parks Therefore, the purpose of this study was to 1) select five neighborhood parks in Daegu, 2) analyze landscape ecological characters with isolation, connection and circulation, and 3) compare data. It is certain that these results should be the main data for the arrangement of improvement proposals which landscape ecological characters were appled to.

  • PDF

Atmospheric Studies Using a Three-Dimensional Eulerian Model in Kyongin Region (3차원 오일러리안 확산모델을 이용한 경인산단권역의 대기거동 해석)

  • Song, Dong-Woong
    • Journal of Environmental Science International
    • /
    • v.15 no.5
    • /
    • pp.387-396
    • /
    • 2006
  • The numerical modeling and comparison with observations are performed to find out the detailed structure of meteorology and the characteristic of related dispersion phenomena of the non-reactive air pollutant at Kyoungin region, South Korea, where several industrial complex including Siwha, Banwol and Namdong is located. MM5 (Fifth Generation NCAR/Penn State Mesoscale Model), 3-D Land/sea breeze model and 3-D diagnostic meteorological model have been utilized for the meteorological simulation for September, 2002 with each different spatial resolution, while 3-D Eulerian air dispersion model for the air quality study. We can see the simulated wind field shows the very local circulation quitely well compared with in-site observations in shoreline area with complex terrains, at which the circulation of Land/sea breeze has developed and merged with the mountain and valley breeze eventually. Also it is shown in the result of the dispersion model that the diurnal variation and absolute value of daily mean $SO_2$ concentrations have good agreement with observations, even though the instant concentration of $SO_2$ simulated overestimates around 1.5 times rather than that of observation due to neglecting the deposition process and roughly estimated emission rate. This results may indicate that it is important for the air quality study at shoreline region with the complex terrain to implement the high resolution meteorological model which is able to handle with the complicate local circulation.

Evaluation of Concrete Materials for Desulfurization Process By-products (황부산물의 콘크리트 원료 활용 가능성 평가)

  • Park, Hye-Ok;Kwon, Gi-Woon;Lee, Kyeong-Ho;Kim, Moon-Jeong;Lee, Woo-Weon;Ryu, Don-Sik;Lee, Jong-Gyu
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.28 no.4
    • /
    • pp.15-22
    • /
    • 2020
  • The landfill gas produced in landfill is generally made up of methane(CH4) and carbon dioxide(CO2) of more than 90%, with the remainder made up of hydrogen sulfide(H2S). However, separate pre-treatment facilities are essential as hydrogen sulfide contained in landfill gas is combined with oxygen during the combustion process to generate sulfur oxides and acid rain combined with moisture in the atmosphere. Various desulfurization technologies have been used in Korea to desulfurize landfill gas. Although general desulfurization processes apply various physical and chemical methods, such as treatment of sediment generation according to the CaCO3 generation reaction and treatment through adsorbent, there is a problem of secondary wastes such as wastewater. As a way to solve this problem, a biological treatment process is used to generate and treat it with sludge-type sulfide (S°) using a biological treatment process.In this study, as a basic study of technology for utilizing the biological treatment by-products of hydrogen sulfide in landfill gas, an experiment was conducted to use the by-product as a mixture of concrete. According to the analysis of the mixture concrete strength of sulfur products, the mixture of sulfur by-products affects the strength of concrete and shows the highest strength value when mixing 10%.