• 한국전기전자재료학회논문지
• /
• 제22권2호
• /
• pp.184-190
• /
• 2009

One of the purposes of arc control is to change its state to the diffuse state before current zero as soon as possible. This can provide optimal conditions for full extinction of arc by minimizing the quantity of residual plasma between contacts near current zero. TRV(transient recovery voltage) occurs at current zero at the same time with current interruption. If there is substantial residual plasma near current zero it can cause 'post arc current' by the interaction of its conductance with TRV. In this paper, arc control ability as a function of configuration of spiral type VI contacts was compared on the criteria of the time taken for arc to reach to the diffuse state.

• KSBB Journal
• /
• 제14권5호
• /
• pp.561-565
• /
• 1999

Optimum conditions for vacuum-drying ad cultivation of yeast cells for the production of active dry yeast were examined. At lower temperature, more drying time was required to dry the yeast pellet to reach the desirable water content(8%). Optimum temperature of vaccum oven and time for drying was 63$^{\circ}C$ and 90 min, respectively. Optimum medium composition for flask culture using cane molasses as the substrate were 0.25% sugar, 0.013% $K_2$HPO$_4$, 0.1% $K_2$HPO$_4$. and 0.125% (NH$_4$)$_2$SO$_4$. Culture temperature $25^{\circ}C$ gave the highest survival rate of dired yeast. After finishing fed-batch culture and the culture was left in the fermentor without adding any sugar or nutrient, survival of the dried yeast harvested from the fermentor increased to 86.0% after 36 hr. It was also observed that the yeast cells with higher budding rates showed lower survival rate.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1363-1370
• /
• 1999

A study of scaling and heat transfer has been carried out for a vertical tube evaporator in which $CaSO_4$ saturated water flows upward. Experimental apparatus including vacuum chambers and heaters has been designed and manufactured to study scaling phenomena for three different pressures(1atm, 0.27atm and 0.16atm). Overall heat transfer coefficients have been measured and shown to decrease with time as scaling proceeds. After the end of experiments, the vertical tube has been cut to measure the thickness of scale at different heights. Below the height where the bulk fluid temperature does not reach saturated temperature, the thickness of scale increases, however, beyond that height occurring saturated condition, the thickness does not vary much or even decreases a little. The measured fouling resistances also support these variations of scale thickness.

• 한국축산식품학회지
• /
• 제33권1호
• /
• pp.58-66
• /
• 2013

In this study, the effect of packaging methods [aerobic packaging (AP), vacuum packaging (VP) and modified atmosphere packaging (MAP: 75% $N_2$, 25% $CO_2$)] on colour, lipid quality and microbial growth of beef patties enhanced with flaxseed flour was investigated during storage at $2{\pm}1^{\circ}C$ for 10 d. L and a values of beef patties packaged in MAP and VP were higher (p<0.05) than that of the samples packaged in AP. Packaging in MAP and VP retarded the lipid oxidation (TBA value) and inhibited the bacterial growth of beef patties enhanced with flaxseed flour. Furthermore, TBA values in beef patties were correlated with a values (r = -0.340; p<0.05). Packaging in MAP was more effective than packaging in VP for inhibiting microbial growth. The samples packaged in VP lost their shape due to the compression by external atmosphere. Packaging treatment had no significant effect on saturated fatty acid (SFA), monounsaturated fatty acid (MUFA) and polyunsaturated fatty acid (PUFA) levels in beef patties. The a and b, TBA and MUFA values changed during storage time. TBA values for beef patties increased during storage time, but did not reach to the limit value (1 mg/kg) until the end of the storage time. The results suggest that the shelf life of beef patties enhanced with flaxseed flour can be extended by packaging in MAP.

• 한국지반신소재학회논문집
• /
• 제21권1호
• /
• pp.11-21
• /
• 2022

본 연구에서는 개별진공압밀공법과 침투압밀공법의 단점을 보완하여 새로운 연약지반 개량공법인 개별진공 침투압밀공법을 개발하여 수치해석을 통해 지반 공학적 거동을 예측하였다. 개별진공 침투압밀공법을 적용할 경우, 대수층이 개량 대상층 중간 또는 하단에 위치하여 피압 대수층인 경우 침하 촉진 및 발생 침하량 증대 효과가 높았다. 대수층에서의 양수량은 일정 수준 이상 되면 침하 거동에 영향을 미치지 않는 것으로 나타났다. 성토체 내측이나 외측 등 다양한 위치에서 진공 양수정을 설치하여도 침하 및 수평 변위 차이는 미미하였다. 개별진공압밀과 병행하는 경우, 진공압이 적용되는 초기 침하는 진공압의 크기에 영향을 받았지만, 최종 침하량은 진공압의 영향이 미미한 것으로 예측되었다. 또한, 두 공법을 동시에 진행하는 것이 침하속도가 가장 빠르고, 내향 변위도 큰 것으로 예측하였다. 본 연구에서 개발한 공법은 매우 빠른 시점에 목표 침하량에 도달할 수 있으므로 연직배수재 배치 간격을 늘릴 수 있어 경제성을 확보할 수 있는 것으로 확인되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.297.2-297.2
• /
• 2013

Scavenging electricity from wasteful energy resources is currently an important issue and piezoelectric nanogenerators (NGs) based on zinc oxide (ZnO) are promising energy harvesters that can be adapted to various portable, wearable, self-powered electronic devices. Although ZnO has several advantages for NGs, the piezoelectric semiconductor material ZnO generate an intrinsic piezoelectric potential of a few volts as a result of its mechanical deformation. As grown, ZnO is usually n-type, a property that was historically ascribed to native defects. Oxygen vacancies (Vo) that work as donors exist in ZnO thin film and usually screen some parts of the piezoelectric potential. Consequently, the ZnO NGs' piezoelectric power cannot reach to its theoretical value, and thus decreasing the effect from Vo is essential. In the present study, c-axis oriented insulator-like sputtered ZnO thin films were grown in various temperatures to fabricate an optimized nanogenerator (NGs). The purity and crystalinity of ZnO were investigated with photoluminescence (PL). Moreover, by introducing a p-type polymer usually used in organic solar cell, it was discussed how piezoelectric passivation effect works in ZnO thin films having different types of defects. Prepared ZnO thin films have both Zn vacancies (accepter like) and oxygen vacancies (donor like). It generates output voltage 20 time lager than n-type dominant semiconducting ZnO thin film without p-type polymer conjugating. The enhancement is due to the internal accepter like point defects, zinc vacancies (VZn). When the more VZn concentration increases, the more chances to prevent piezoelectric potential screening effects are occurred, consequently, the output voltage is enhanced. Moreover, by passivating remained effective oxygen vacancies by p-type polymers, we demonstrated further power enhancement.

• 한국수소및신에너지학회논문집
• /
• 제19권5호
• /
• pp.403-409
• /
• 2008

Polymer electrolyte membrane fuel cell (PEMFC) is very interesting power source due to high power density, simple construction and operation at low temperature. But it has problems such as high cost, improvement of performance, effect of temperature and initial start at low temperature. These problems can be approached to be solved by using experiment and mathematical method which are general principles for analysis and optimization of control system for heat and hydrogen detecting management. In this paper, insulation vessel and control system for stable operation of fuel cell at low temperature were developed for experiment. The constant temperature capability and the heating time at sub-zero temperatures with insulation control system were studied by using a heating bar of 60W class. PEMFC stack which was made by 4 cells with $50\;mc^2$ active area in each cell is a thermal source. Times which take to reach constant temperature by the state of insulation vacuum were measured at variable environment temperatures. The test was performed at two conditions: heating mode and cooling mode. Constant temperature capability was better at lower environment temperature and vacuum pressure. The results of this experiment could be used as basis data about stable operation of fuel cell stack in low temperature zone.

• 한국진공학회지
• /
• 제22권6호
• /
• pp.298-305
• /
• 2013

스토버 방법(St$\ddot{o}$ber method)을 이용하여 균일한 크기의 실리카 나노비드(silica nanobead)를 합성하였으며 초음파(sonication) 방법을 이용하여 분자 처리된 유리 기판 위에 실리카 나노비드를 단층(monolayer)으로 정렬시켰다. 유리기판위에 처리된 분자층은 3-chloropropyltrimethoxysilane (CP-TMS)와 polyethyleneimine (PEI)가 사용되어졌고 합성된 나노비드는 톨루엔에 분산시킨 뒤 초음파방법으로 유기기판위에 부착되어졌다. 수행되어진 초음파방법은 분자 처리된 유리 기판을 단독으로 사용하는 SO (sonication without stacking) 모드와 두 개의 깨끗한 유리 기판 사이에 분자 처리된 유리 기판을 삽입하여 사용하는 SS (sonnication with stacking) 모드로 구분지어 적용되었으며, 기판위에 정렬된 실리카 나노비드의 무게는 마이크로 저울(microbalance)을 이용하여 측정한 뒤 점유도(degree of coverage, DOC)를 계산하였다. 결론적으로, SO 모드에서는 DOC가 단기간에 가파르게 상승하여 140% 이상까지 도달했지만 다층(multi-layer)구조가 많이 발견되는 특징이 있었고, SS 모드에서는 DOC가 평형에 도달하는 시간이 SO 모드보다 느리게 진행되었지만 보다 밀집(close-packing)된 형태의 단층구조가 관측되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.668-672
• /
• 2003

In order to reach the high electrical quality of organic thin film transistors (OTFTs) such as high mobility and on-off current ratio, it is strongly desirable to study the enhancement of electrical properties in OTFTs. Here, we report the novel method of hydrogen $(H_{2})$ plasma treatment to improve electrical properties in inverted staggered OTFTs based on pentacene as active layer. To certify the effect of this method, we compared the electrical properties of normal device as a reference with those of device using the novel method. In result, the normal device as a reference making no use of this method exhibited a field effect mobility of 0.055 $cm^{2}/Vs$, on/off current ratio of $10^{3}$, threshold voltage of -4.5 V, and subthreshold slope of 7.6 V/dec. While the device using the novel method exhibited a field effect mobility of 0.174 $cm^{2}/Vs$, on/off current ratio of $10^{6}$. threshold voltage of -0.5 V, and subthreshold slope of 1.49 V/dec. According to these results, we have found the electrical performances in inverted staggered pentacene TFT owing to this novel method are remarkably enhanced. So, this method plays a key role in highly improving the electric performance of OTFTs. Moreover, this method is the first time yet reported for any OTFTs

• Korean Chemical Engineering Research
• /
• 제51권5호
• /
• pp.545-549
• /
• 2013

높은 수율로 CHMI를 제조하는 공정을 개발하기 위한 연구의 일환으로, 공정 중간체 CHMAIE를 합성하는 실험적 연구를 수행하였다. CHMAIE 제조 공정의 중간체인 CHMA 생성반응은 무수 말레인산 용액에 사이크로헥실아민을 점적 투입한 후 반응액을 2시간 동안 숙성시키는 방법으로 완료하였으며, 생성된 CHMA를 $10^{\circ}C$ 이하에서 2.5시간 동안 석출시키면 98.2%의 수율을 얻을 수 있었다. CHMA로부터 CHMAIE를 제조하는 에스테르화 반응의 최적 온도는 $68^{\circ}C$ 이었으며, 이 최적 온도에서의 평형 전화율은 98.5%였다. 에스테르화 반응이 평형에 도달하는 시간은 온도에 따라 감소하며, 최적 온도에서의 평형도달 시간은 약 3시간 정도였다. 최종 생성물 중의 톨루엔은 진공 증류를 통하여 회수할 수 있었다. 톨루엔의 회수율은 증류 온도가 증가함에 따라 증가하였고, 증류 온도 $55^{\circ}C$에서의 톨루엔 회수율은 98%였다.