• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.5-10
• /
• 2018

Vacuum-assisted thermoforming is one of the critical steps for successful application of film insert molding(FIM) to parts of complex shape. In this study, the simulations and experiments of thermoforming processes were performed to investigate the effects of process conditions on thickness distribution and printed pattern deformation of films in vacuum-assisted thermoforming. The film thickness uniformity increased with decreasing film heating time, whereas it increased with increasing vacuum delay time. After thermoforming of films with uniform pattern space of 5mm, the maximum space was 9.432mm. Based on the simulation, a modified pattern was calculated to obtain uniform spaces after thermoforming. In the experiments for film with the modified pattern, the maximum space appeared 5.837mm. In, addition. the predicted patterns were in good agreement with the experimental results.

• Journal of Applied Reliability
• /
• v.3 no.2
• /
• pp.103-116
• /
• 2003

We carry out reliability tests and investigate the failure mechanisms. of the wafer level vacuum packaged MEMS gyroscope sensor using an accelerated degradation test. The accelerated degradation test (ADT) is used to evaluate reliability (and/or life) of the MEMS vacuum package and to select the accelerated test conditions, which reduce the reliability testing time. Using the failure distribution model and stress-life model, we are able to estimate the average life time of the vacuum package, which is well agreed with the measured data. After improving several package reliability issues such as prevention of gas diffusion through package, we carry out another set of accelerated tests at the chosen acceleration level. The results show that reliability of the vacuum packaged gyroscope has been greatly improved and can survive without degradation of performance, which is the Q-factor in gyroscope sensor, during environmental stress reliability tests.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.6
• /
• pp.334-338
• /
• 2013

In this study, the outgassing effects of selected vacuum materials on the vacuum characteristics were simulated by the $VacSim^{Multi}$ simulation tool. This investigation examined the feasibility of reliably simulating the outgassing characteristics of common vacuum chamber materials (aluminum, copper, stainless steel, nickel plated steel, Viton A). The optimum design factors for these vacuum systems were suggested based on the simulation results. The baking-out effects of the modeled systems and materials on the performance of the vacuum system were also analyzed. The simulation predicted that the overall outgassing effect was more significant in the turbomolecular pump system than in the diffusion pump system and that the utilization of a booster pump has a greater effect on the evacuation time than on the ultimate pressure.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.1
• /
• pp.7-12
• /
• 2009

The outgassing effects of selected vacuum materials on the vacuum characteristics were simulated by the $VacSim^{Multi}$ simulation tool. This investigation examined the feasibility of reliably simulating the outgassing characteristics of common vacuum chamber materials (aluminum, copper, stainless steel, nickel plated steel, Viton A). The optimum design factors for these vacuum systems were suggested based on the simulation results. The baking-out effects of the modeled systems and materials on the performance of the vacuum system were also analyzed. The simulation predicted that the overall outgassing effect was more significant in the TMP system than in the DP system and that the utilization of a booster pump has a greater effect on the evacuation time than on the ultimate pressure.

• 한국기계연구소 소보
• /
• s.20
• /
• pp.89-104
• /
• 1990

This study was carried out to obtain the most optimum conition in vacuum sintering of M2 HSS powder, by analysis of sintering characteristics and fracture strength in several conditions. The conclusion deduced from this study are as follows; -Boron was more effective element than graphite; at this time, the optimum amount of addition was 0.05 wt% -The optimum condition of sintering temperature and time were 1190- $1200^{\circ}C$ and 1-1.25hr, respectively -Fracture strength of vacuum sintered and heat-treated specimen in the most optimum condition was 2-2.5KN/ $mm^2$

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.02a
• /
• pp.44-44
• /
• 2005

• Proceedings of the Korean Vacuum Society Conference
• /
• 2001.02a
• /
• pp.23-24
• /
• 2001

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.49-49
• /
• 2009

• Proceedings of the Korean Vacuum Society Conference
• /
• 1995.06a
• /
• pp.76-77
• /
• 1995

• Proceedings of the Korean Vacuum Society Conference
• /
• 1997.02a
• /
• pp.201-202
• /
• 1997