• Food Science of Animal Resources
• /
• v.24 no.2
• /
• pp.135-145
• /
• 2004

The CLA used to add in diet was chemically synthesized by alkaline isomerization method with corn oil. Pigs were divided into 5 treatment groups (4 pigs/group) and subjected to one of five treatment diets (0, 1.25％ CLA for 2weeks, 2.5％ CLA for 2weeks, 1.25％ CLA for 4weeks and 2.5％ CLA for 4weeks, CLA diets; total fed diets) before slaughter. Pork loin were collected from the animals (110kg body weight) slaughtering at the commercial slaughter house. Manufacture press ham using CLA accumulated pork loin were vacuum packaged and then stored during 1, 7, 14, 21 and 28 days at 4$^{\circ}C$. Samples were analyzed for texture characteristics, sensory evaluation, fatty acid composition and CLA content. There was no significant difference in texture among control and CLA treatment groups. It was not clearly changed by storage time. No remarkable differences were found in sensory properties (color, flavor, texture and acceptability) between control and CLA treatment groups. It was not clearly changed by the passage of storage time. In the change of fatty acid composition, the contents of oleic, linoleic and arachidonic were decreased by dietary CLA-supplementation, whereas the increase level of CLA-supplementation resulted in the higher palmitic and stearic acid than control. As dietary CLA was increased in feed, the content of CLA in pork was increased.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.351-361
• /
• 2007

The samples composed of a GST thin film and the protective layers of $ZnS-SiO_2$ or $Al_2O_3$ coated on c-Si substrate were prepared by using the magnetron sputtering method. Samples of three different structures were prepared, that is, i) the GST single film on c-Si substrate, ii) the GST film sandwiched by the protective $ZnS-SiO_2$ layers on c-Si substrate, and iii) the GST film sandwiched by $Al_2O_3$ protective layers on c-Si substrate. The ellipsometric constants in the temperature range from room temperature to $700^{\circ}C$ were obtained by using the in-situ ellipsometer equipped with a conventional heating chamber. The measured ellipsometric constants show strong variations versus temperature. The variation of ellipsometric constants at the temperature region higher than $300^{\circ}C$ shows different behaviors as the ambient medium is changed from in air to in vacuum or the protective layers are changed from $ZnS-SiO_2$ to $Al_2O_3$. Since the long heating time of 1-2 hours is believed to be the origin of the high temperature variation of ellipsometric constants upon the heating environment and the protective layers, a PRAM (Phase-Change Random Access Memory) recorder is introduced to reduce the heating time drastically. By using the PRAM recorder, the GST samples are heated up to $700^{\circ}C$ decomposed preventing its partial evaporation or chemical reactions with adjacent protective layers. The surface image obtained by SEM and the surface micro-roughness verified by AFM also confirmed that samples prepared by the PRAM recorder have smoother surface than the samples prepared by using the conventional heater.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.1
• /
• pp.3-11
• /
• 1989

This study was carried out to investigate the physical and mechanical properties. durability of adhesive bond and paint film for the basic data which were required to determine the suitability as a raw material for furniture the laminated veneer lumber (LVL) with pitch pine (Pinus rigida Mill). The results obtained were as follows; 1) The proper pressing time for making the LVL was over 45 second per milimeter of LVL thickness. 2) The bending strength of the LVL was lower than that of the solid wood but the compressive strength of the LVL was similar to that of the solid wood. The strength increased with the decrease of veneer thickness. 3) The impact bending absorbed energy of the LVL was 0 to 0.3 kg.m/$cm^2$ in the direction of parallel to the grain. The energy of the LVL was lower than that of the solid wood (0.68 kg.m/$cm^2$). 4) In warm water soaking and cold-dry tests, delamination of adhered layers surface crack, swelling, and color change were not found when the hot pressing time was over 45 second per milimeter of LVL thickness. As a result of soak under vacuum test shrinkage in the direction of parallel to the grain was about -1.0 percent and. was about 3.0 percent in the direction of the perpendicular to the grain. 6) The film cacks on the LVL's surface after the wet and cold-dry test were not found at all. 7) In the use of the LVL for interior decoration it was considered that the surface of the LVL be overlaid crossly with fancy veneers of birch and paulownia, etc. This cross overlayirg methods have resulted in few cracks on the fancy veneer.

• Journal of Life Science
• /
• v.27 no.7
• /
• pp.754-759
• /
• 2017

The 100 l culture system was made on the basis of LED light, and Nannochloropsis oculata was cultured in f/2 medium at light intensity ($100{\mu}mol/m^2/s$), culture temperature ($20^{\circ}C{\pm}1^{\circ}C$) and LD cycle (12hr). As a result, the maximum biomass of 1.07 g/l was cultured as a result of 100 l mass culture at $100{\mu}mol/m^2/s$ and 24 mg/l nitrate concentration in LED blue (475 nm). The extraction was carried out using sonicator, homogenizer and chemical method 0.5M HCl shredding method. The contents of chlorophyll a, chlorophyll b and carotenoid were 1.6, 0.5 and 0.3 mg/g cell. When using homogenizer, it was measured at 1.0, 0.6 and 0.2 mg/g cell. The chemical breakdown method of 0.5M HCl, chlorophyll a, b, and carotenoid contents were measured as 0.9, 0.8, 0 mg/g cell. The highest amount of biomass during the distruption time was measured at 3.6 mg/g cell at 15 min disintegration and acetone, 3.6 mg/g cell of acetone, methanol, and ethanol were measured as effective solvents. Concentration was measured by using microfilter, disk type continuous centrifuge and tubular type continuous centrifuge were 16.0, 1.1 and 0.5 g/l, respectively. Four kinds of equipment such as hot air dryer, vacuum dryer, spray dryer and freeze dryer were tested to optimize the drying process. As a result, the recovery rates of spray dryer and freeze dryer were 80% and 60%.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.645-658
• /
• 2004

To investigate the effects of conjugated linoleic acid added diet feeding on CLA accumulation and quality characteristics of manufactured press ham using CLA accwnulated pork loin meat. The CLA used to add in diet was chemically synthesized by alkaline isomerization method with com oil. Pigs were divided into 5 treatment groups(4 pigs/group) and subjected to one of five treatment diets(0, 1.25% CLA for 2weeks, 2.5% CLA for 2weeks, 1.25% CLA for 4weeks and 2.5% CLA for 4weeks, CLA diets; total fed diets) before slaughter. Pork loin were collected from the animals(110kg body weight) slaughtering at the commercial slaughter house. Manufacture press ham using CLA accumulated pork loin meat were vacuum packaged and then stored during 1, 7, 14, 21 and 28 days at 4$^{\circ}C$. Samples were analyzed for general compositions, physico-chemical properties(pH, color, shear force value), TBARS. pH value of CLA treatment(T4) was increased significantly than that of oontrol(P<0.05). pH of control and CLA treatments were increased significantly as the storage period passed(P< 0.05). Crude fat content of CLA treatment groups was significantly higher than the control pork (P<0.05). Meat color(CIE $L^*$, $a^*$$b^*$

• Food Science of Animal Resources
• /
• v.29 no.4
• /
• pp.437-444
• /
• 2009

${\gamma}-Aminobutyric$ acid (GABA) producing lactic acid bacteria, Lactobacillus acidophilus RMK567 was cultivated in 50 L of sterilized MRS broth using a fermenter at $40^{\circ}C$ for 24 h. The cell number was increased to $10.04{\pm}0.13$ Log CFU/mL with a growth rate constant (k) of 0.454 generation/h and a generation time (g) of 2.303 h after a lapse of a lag phase (L) of 5.16 h. A total of 487 g of cell paste with 40.5% moisture was harvested with viable cell number of 12.48 Log CFU/g cell paste. The cell pastes after preparation with glycerol, glucose, and polydextrose as cryo-protectants were lyophilized under a vacuum of 84 m torr. A total of 408 g of freeze dried (FD) cell powders were mixed with a commercial strain of Streptococcus thermophilus to prepare of three types FD starter cultures with the viable cell numbers of 12.42 (FDA-GY), 12.60 (FDBGG) and 12.91 (FDC-GP) Log CFU/g. During preservation the FD cultures at -$18^{\circ}C$, the cell viability of the FD starter cultures were rapidly dropped to below 3.24% of the day of storage. No significant difference was found in the cell viabilities among three types of FD starters cultures, but significant difference (p<0.01) was found in storage periods. Yoghurts fermented through FD starter culture of L. acidophilus RMK567 were determined to contain $155.16{\pm}8.53$ ppm, $243.82{\pm}4.27$ ppm, and $198.64{\pm}23.46$ ppm of GABA, respectively. This study shows that GABA production activity of L. acidophilus RMK567 is not affected during the freeze drying process and would be available for commercial production of yoghurt containing high GABA content.

• Korean Security Journal
• /
• no.36
• /
• pp.525-559
• /
• 2013

Modern society has been exposed to various dangers and crimes in the process of globalization, informationization, decentralization etc. along with the development of material civilization under rapid changing societal environment. These factors are exerting a lot of effects in public security environments, as result there are gradual interest about crime and crime prevention. Realization of responsibility who take charge of social safety, from public security to private security, appears important topic at the moment. The positive point of view which private security industry is responsible to cope with security spheres instead of public security has been emerged from the reason that the public security has limitation to solve security problems for themselves. It is the time to make effort to compromise the public security and the private security industry to forecast social change and prevent dangers in the advance. In Korea, there has been close cooperation between public security and private security for decades. Strongly emerging and interesting sphere is "Private Investigation(Private Detective)" in Korea at present. There has been some proposed legislations of private investigation for decreasing burden of public security and social sympathy about possibility of private investigation system is increasing now. In this study, we focused on the introduction of private investigation system through the analysis of bill proposals for last 14 years, for instance historical aspects, contents, the differences among bill proposals. Among these, a comparison on bill proposals of the 19th National Assembly's during 2012 - 2013 were analysed mainly. We examined the importance point at issue items for introduction of private investigation system. Suggestions for introduction of private investigation system is as follows. The necessity of independent bill for developmental private investigation system is needed and the main body should be a juristic person instead of a individual for the public interest and responsibility. For the good service of private investigation and to prevent the unqualified person become a private investigator, the recruiting system and examination of private investigator should be prepared well and take into consideration anticipated problems. Also the necessity of definite jurisdiction department's appointment to divide responsibility in operation.

• the MEAT Journal
• /
• s.34 winter
• /
• pp.14-25
• /
• 2007

The objective of this study was to investigate the physicochemical, microbiological and sensory properties of food additive-free grilled pork products manufactured using loin (T1), tender loin (T2) and ham (T3). The samples were heated for 30 min at $60^\circC$, and then 50 min for $150^\circC$. After cooling, vacuum packaged grilled pork samples was stored at $4\pm$$1^\circC$ for 40 days. The pH values of grilled pork samples ranged from 5.92 (T1) to 6.10 (T3) at the initial storage time, and from 6.28 (T1) to 6.60 (T3) after 40 days. The water holding capacities (%) was 85.99~93.24% for T1, 85.26~93.89% for T2 and 89.11~94.67% for T3, all of which were slightly higher than those of other pork products. The shear force values of T2 were significantly higher (p<0.05) than those of the other pork products throughout the storage period. The TBARS and VBN values of T2 were significantly higher (p<0.05) than those of T1 and T3. With regard to microorganisms, all grilled pork samples was in good condition, showing 1.93~3.48 log10 CFU/g via total plate counts, and 1.74~3.48 log10 CFU/g for lactic acid bacteria throughout the storage period. Regarding sensory evaluation, the scores of overall acceptability in all products were above 5.0 points through 40 days of storage.

• Journal of Animal Science and Technology
• /
• v.49 no.1
• /
• pp.109-120
• /
• 2007

CLA was chemically synthesized by alkaline isomerization method using corn oil. CLA-TG was synthesized by chemical reaction using sodium methoxide. For the control, 10% of back fat among the total component was only added without the annex of CLA-TG. For the first treatment, 5% of CLA-TG among the lard component added into the press ham was replaced. For the 2nd, 3rd and 4rd treatments, 10%, 15% and 20% of CLA-TG was respectively replaced. Manufacture press ham using CLA-TG were vacuum packaged and then stored during 1, 7, 14, 21 and 28 days at 4℃. Samples were analyzed for shear force value, sensory evaluation, TBARS, fatty acid composition and CLA content. Shear force value of control was significantly higher than that of CLA-TG treatment groups(P<0.05). All treatments were increased by the passage of storage time. No remarkable differences were found in sensory properties among control and CLA-TG treatment groups. CLA-TG treatment groups showed significantly(P<0.05) lower TBARS value than the control. TBARS value was increased significantly during storage in all treatment. In the change of fatty acid composition, the contents of C14:0～C20:4 were decreased significantly by CLA-TG additive. Whereas the increase level of CLA-TG additive resulted in the significantly higher unsaturated fatty acid and CLA content. Summing up the a forementioned results, press ham manufacturing with CLA-TG additive was not affected in sensory evaluation. Also, it may be assumed that the high quality press ham can be manufactured with the extent of storage period and CLA accumulation.

• Applied Science and Convergence Technology
• /
• v.27 no.1
• /
• pp.9-13
• /
• 2018

Samples of anodic oxide film used in semiconductor and display manufacturing processes were prepared at different electrolyte temperatures to investigate the corrosion resistance. The anodic oxide film was grown on aluminum alloy 6061 by using a sulfuric acid ($H_2SO_4$) electrolyte of 1.5 M at $0^{\circ}C$, $5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, and $20^{\circ}C$. The insulating properties of the samples were evaluated by measuring the breakdown voltage, which gradually increased from 0.43 kV ($0^{\circ}C$) to 0.52 kV ($5^{\circ}C$), 1.02 kV ($10^{\circ}C$), and 1.46 kV ($15^{\circ}C$) as the electrolyte temperature was increased from $0^{\circ}C$ to $15^{\circ}C$, but then decreased to 1.24 kV ($20^{\circ}C$). To evaluate the erosion of the film by fluorine plasma, the plasma erosion and the contamination particles were measured. The plasma erosion was evaluated by measuring the breakdown voltage after exposing the film to $CF_4/O_2/Ar$ and $NF_3/O_2/Ar$ plasmas. With exposure to $CF_4/O_2/Ar$ plasma, the breakdown voltage of the film slightly decreased at $0^{\circ}C$, by 0.41 kV; however, the breakdown voltage significantly decreased at $20^{\circ}C$, by 0.83 kV. With exposure to $NF_3/O_2/Ar$ plasma, the breakdown voltage of the film slightly decreased at $0^{\circ}C$, by 0.38 kV; however, the breakdown voltage significantly decreased at $20^{\circ}C$, by 0. 77 kV. In addition, for the entire temperature range, the breakdown voltage decreased more when sample was exposed to $NF_3/O_2/Ar$ plasma than to $CF_4/O_2/Ar$ plasma. The decrease of the breakdown voltage was lower in the anodic oxide film samples that were grown slowly at lower temperatures. The rate of breakdown voltage decrease after exposure to fluorine plasma was highest at $20^{\circ}C$, indicating that the anodic oxide film was most vulnerable to erosion by fluorine plasma at that temperature. Contamination particles generated by exposure to the $CF_4/O_2/Ar$ and $NF_3/O_2/Ar$ plasmas were measured on a real-time basis. The number of contamination particles generated after the exposure to the respective plasmas was lower at $5^{\circ}C$ and higher at $0^{\circ}C$. In particular, for the entire temperature range, about five times more contamination particles were generated with exposure to $NF_3/O_2/Ar$ plasma than for exposure to $CF_4/O_2/Ar$ plasma. Observation of the surface of the anodic oxide film showed that the pore size and density of the non-treated film sample increased with the increase of the temperature. The change of the surface after exposure to fluorine plasma was greatest at $0^{\circ}C$. The generation of contamination particles by fluorine plasma exposure for the anodic oxide film prepared in the present study was different from that of previous aluminum anodic oxide films.