• Composites Research
• /
• 제29권3호
• /
• pp.104-110
• /
• 2016

본 논문은 층간 삽입 반응을 이용하여 그래핀을 박리하는 동시에 탄소나노튜브를 개별 분산시키고 이를 복합 필름으로 제조한 결과를 보고한다. 일반적으로 그래핀과 탄소나노튜브의 경우 흑연과 탄소나노튜브 번들로부터의 개별적 박리를 통해 제조될 수 있으나 장시간의 공정 시간을 요구하게 된다. 본 연구에서는 그래핀과 탄소나노튜브의 동시 박리 및 분산을 위해 흑연 및 탄소나노튜브 번들 내로 포타슘 소듐 타르트레이트를 삽입했으며 XRD 분석을 통해 흑연 층간 거리 및 탄소나노노튜브 번들 내 거리의 증가를 확인했다. 제조된 층간삽입화합물로부터 박리된 그래핀 및 탄소나노튜브의 경우 매우 낮은 산화도(< 8.3 at%)를 나타냈으며 제조된 물질을 여과 장치 및 스프레이 전사를 통해 복합 필름으로 제조한 결과 그래핀 및 탄소나노튜브의 단일 필름에 대비하여 복합 필름의 경우 전도성의 향상을 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.70-77
• /
• 2000

In this paper, the effect of solution and age heat treatment to the corrosion behavior for the Ti-6Al-4V alloy were studied by cyclic polarization methods. Ti-6Al-4V was solution heat treated at $1,066^{\circ}C$ and $966^{\circ}C$ for 5 hours, and followed by age heat treated at $650^{\circ}C$, $600^{\circ}C$ and $550^{\circ}C$ with 1, 2, 4, 8 and 16 hours under vacuum environment. Test solution was 3.5% NaCl with temperature $25^{\circ}C$. The obtained results were as follows: 1. Base metal was exhibited higher electrical charge than that of solution and aged material. With decrease of solution-treatment temperature from 1066 to $966^{\circ}C$, the electrical charge was increased due to softening of micro structure. 2. The corrosion resistance of specimen that solution treated at $966^{\circ}C$ for 5 hours and age heat treated at 650, 660 and $550^{\circ}C$ were increased with increase of aging time to 4, 8 and 16 hours respectively, and then decreased. 3. In case of 316L stainless steel, measured charge and corrosion potential was 0.0627 coulomb and -614 mV respectively. Corrosion resistance of Ti-6Al-4V was higher than that of 316L.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.152-152
• /
• 2017

Titanium and its alloys have been widely used for biomedical applications. However, the use of the Ti-6Al-4V alloy in biomaterial is then a subject of controversy because aluminum ions and vanadium oxide have potential detrimental influence on the human body due to vanadium and aluminum. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element,such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}$-stabilizer and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Silicon (Si) and magnesium (Mg) has a beneficial effect on bone. Si in particular has been found to be essential for normal bone and cartilage growth and development. In vitro studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. Therefore, in this study, Si and Mg coatings on the hydroxyapatite film formed Ti-29Nb-xHf alloys by plasma electrolyte oxidation has been investigated using several experimental techniques. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. The electrolyte was Si and Mg ions containing calcium acetate monohydrate + calcium glycerophosphate at room temperature. The microstructure, phase and composition of Si and Mg coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.

• 한국분말재료학회지
• /
• 제22권4호
• /
• pp.283-288
• /
• 2015

Two sintering methods of a pressureless sintering and a spark-plasma sintering are tested to densify the Fe-TiC composite powders which are fabricated by high-energy ball-milling. A powder mixture of Fe and TiC is prepared in a planetary ball mill at a rotation speed of 500 rpm for 1h. Pressureless sintering is performed at 1100, 1200 and $1300^{\circ}C$ for 1-3 hours in a tube furnace under flowing argon gas atmosphere. Spark-plasma sintering is carried out under the following condition: sintering temperature of $1050^{\circ}C$, soaking time of 10 min, sintering pressure of 50 MPa, heating rate of $50^{\circ}C$, and in a vacuum of 0.1 Pa. The curves of shrinkage and its derivative (shrinkage rate) are obtained from the data stored automatically during sintering process. The densification behaviors are investigated from the observation of fracture surface and cross-section of the sintered compacts. The pressureless-sintered powder compacts show incomplete densification with a relative denstiy of 86.1% after sintering at $1300^{\circ}C$ for 3h. Spark-plasma sintering at $1050^{\circ}C$ for 10 min exhibits nearly complete densification of 98.6% relative density under the sintering pressure of 50 MPa.

• Composites Research
• /
• 제16권3호
• /
• pp.1-8
• /
• 2003

금속복합재료 개발을 위한 고온가압 성형공정은 기지재료의 비탄성거동과 성형체 내부의 기공에 대한 충진 과정을 수반하며 이러한 강화공정은 압력, 온도 그리고 강화재와 모재의 상대부피분률과 같은 공정변수의 영향을 받게 된다. 특히 티타늄금속기 복합재료의 강화공정은 강화재와 모재 사이의 기계적 혹은 열적 특성 차이 및 생산환경으로 인한 다양한 형태의 손상이 발생할 수 있으며 따라서 이들을 극복하기 위한 재료특성, 작용압력, 온도, 시간조건 등과 공정에 따른 조직의 진전 등 미소역학적 연구가 수반된 최적의 고온가압강화공정의 개발이 요구되어진다. 이를 위하여 본 연구는 VHP방식을 이용한 SiC／Ti-6Al-4V 연속섬유강화 금속기 복합재료의 강화공정실험을 수행하였으며 특히 미시역학적 접근에 따른 다공성 재료의 구성방정식을 이용하여 보강재와 기지재료의 변형거동과 고온가압공정에 필요한 다양한 조건들을 실험결과와 비교 연구하였으며 유한요소해석을 통해 공정변수와 그에 따른 결과들을 고찰하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.66-66
• /
• 2009

Various alloy system, such as Cu-Sn-Ti, Cu-Ag-Ti, and Ni-B-Cr-based alloy are used for the brazing of diamond grits. However, the problem of the adhesion strength between the diamond grits and the brazed alloy is presented. The adhesion strength between the diamond grits and the melting filler alloy is predicted by the contact angle, thereby, instead of diamond grit, the study on the wettability between the graphite and the brazing alloy has been indirectly executed. In this study, Cu-13Sn-12Ti filler alloy was manufactured, and the contact angles, the shear strengths and the interfacial area between the graphites(diamond grits) and braze matrix were investigated. The contact angle was decreased on increasing holding time and temperature. The results of shear strength of the graphite joints brazed filler alloys were observed that the joints applied Cu-13Sn-12Ti alloy at brazing temperature 940 $^{\circ}C$ was very sound condition indicating the shear tensile value of 23.8 MPa because of existing the widest carbide(TiC) reaction layers. The micrograph of wettability of the diamond grit brazed filler alloys were observed that the brazement applied Cu-13Sn-12Ti alloy at brazing temperature $990^{\circ}C$ was very sound condition because of existing a few TiC grains in the vicinity of the TiC layers.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.59-59
• /
• 2009

The influences of B and Si in the filler metals on microstructure and isothermal solidification during transient liquid-phase (TLP) bonding of a nitrogen-containing duplex stainless steel with MBF-30 (Ni-4.5wt.%Si-3.2wt.%B) and MBF-35 (Ni-7.3wt.%Si-2.2wt.%B), were studied at the temperature range of $1030-1090^{\circ}C$ with various times from 60 s to 3600 s under a vacuum of approximately $10^{-5}$ Torr. In case of the former, BN, $Ni_3B$ and $Ni_3Si$ precipitates were formed in the bonding region. BN and $Ni_3Si$ secondary phases were present in the joint for the latter case. The formation of $Ni_3B$ within the joint centerline is dependent on B content. The morphology of $Ni_3Si$ is dominated by Si concentration. A difference between the times for complete isothermal solidification obtained by the experiments and the conventional TLP bonding diffusion model was observed when using MBF-35. According to the simulated results, the isothermal solidification completion time for MBF-35 case was smaller than that in MBF-30. However, this experimental value obtained using MBF-35 was notably larger than that obtained using MBF-30. Isothermal solidification of liquid MBF-30 is controlled by the first isothermal solidification regime dependent on B diffusion model, whereas that of liquid MBF-35 experiences two isothermal solidification regimes and is mainly controlled by the second isothermal solidification dependent on Si diffusion model. In addition, only if Si content exceeds a critical value, the slower 2nd solidification regime will commence.

• 생명과학회지
• /
• 제9권1호
• /
• pp.44-49
• /
• 1999

품질이 양호한 참가자미 조미 반건조제품을 제조하기 위한 기초자료를 얻기 위하여, 참가자미를 조미 반건조한 후 나일론＋폴리에틸렌+선형 저밀도폴리에틸렌 (0.0l5/0.045/0.040 mm)의 적층필름으로 진공포장하여 각각 빙결점 동결저장 (-3$\pm$$0.5^{\circ}C$) 및 냉장 (3$\pm$$0.5^{\circ}C$)하면서 저장중의 품질변화를 검토하였다. 참가자미 반건조제품의 제조를 위한 가장 적합한 냉풍 건조온도 및 시간은 상대습도 50$\pm$5$\%$ 및 풍속 2 m/sec의 조건하에서 각각$20^{\circ}C$ 및 4시간이었으며, 진공포장한 제품의 저장수명은 빙결점 동결저장 (-3$\pm$$0.5^{\circ}C$) 시 35일이었고 냉장 (3 $\pm$$0.5^{\circ}C$) 시 16일이었다.

• 한국식품과학회지
• /
• 제20권3호
• /
• pp.350-356
• /
• 1988

식품 산업에서 이용도가 높을 뿐 아니라 외국 의존도가 높은 진공동결건조기를 reverse enginerring 하여 국산화 개발한 후 그 성능을 시험하였다. 새로 개발한 진공동결건조기는 1 batch 당 8kg의 수증기를 응결시킬 수 있으며, 전도가열에 의해 열판 온도를 $80^{\circ}C$까지 올릴 수 있고 제상방법은 hot gas 방식을 취했다. 진공펌프의 배기시간은 $7{\sim}8$분, cold trap의 온도는 $-50^{\circ}C$까지 유지할 수 있었으며, 잔공동결건조기의 최적 건조능력은 과채류의 경우 batch 당 2kg 정도이며 최고 4kg 까지 건조시킬 수 있었다. 개발한 진공동결건 조기와 기존의 외국산 진공동결건조기를 이용$(^{5,6})$하여 당근을 동결건조시킨 경우 양 장치간에 별 차이는 없었으며, 각 식품의 진공동결건조 특성은 각 식품의 초기 수분 함량 및 초기성상에 영향을 받는 것으로 나타났다.

• 한국항공우주학회지
• /
• 제40권4호
• /
• pp.346-353
• /
• 2012

레이저 조사 시 발생되는 플라즈마를 성분 분석에 이용하는 Laser-Induced Breakdown Spectroscopy(LIBS)는 우주 자원 탐사에 적합한 실시간 성분 분석 기술이다. LIBS 플라즈마의 특성은 주위 압력의 영향을 크게 받는다. 본 연구에서는 다양한 물성치를 갖는 일곱 가지 원소(C, Ti, Ni, Cu, Sn, Al, Zn)의 지속시간(lifetime)이 760 - $10^{-5}$ torr의 압력 범위에서 분석되었다. 압력이 낮아짐에 따라 탄소와 티타늄의 lifetime은 감소하였고, 그 밖의 원소들은 1 torr의 압력에서 가장 오랜 시간동안 검출되었다. 원소별 lifetime 결과를 통하여 낮은 압력 하에서 플라즈마의 특성과 원소별 끓는점 및 전기음성도의 관계를 규명하였다.