• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.3
• /
• pp.143-153
• /
• 1979

A study on tile processing of liquefied fish protein with a long self life and good solubility has been carried out for the effective utilization of sardine. The whole sadine was chopped, homogenized with same amount of water and then hydrolyzed by the addition of commercial proteolytic enzyme. The hydrolysate was centrifuged and the supernatant was decolorized with active carbon, desodorized by azeotropic distillation with toluene, xylene and cyclohexane. The liquefied sardine protein was then concentrated by rotary vacuum evaporator with the addition of starch. The use of $0.2\%$ commercial proteolytic enzyme to the weight of the whole sardine showed the optimum hydrolysis ratio at $55^{\circ}C$ for 4 hours. The liquefied sardine protein could be decolorized and also desodorized by the treatment with $15\%$ active carl]on at room temperature for 30 minuted. In the view point of lipid concentration and the solubility of the product, the liquefied sardine protein prepared by enzymic hydrolysis from the sardine protein concentrate was better than that prepared by enzymic hydrolysis from the whole sardine and sardine protein concentrate.

• Korean Journal of Materials Research
• /
• v.22 no.1
• /
• pp.54-60
• /
• 2012

The particle size of MgO was examined as a function of the Na content in $Mg(OH)_2$ powders and the calcination temperature. $Mg(OH)_2$ suspension was obtained by dropwise precipitation of $Mg(NO_3)_2{\cdot}6H_2O$ and NaOH solutions. The suspension was diluted by varying the dilution volume ratio of distilled water to $Mg(OH)_2$ suspension to change the Na salt concentration in the suspension. $Mg(OH)_2$ slurry was filtered and dried at $60^{\circ}C$ under vacuum, and then its $Mg(OH)_2$ powder was calcined to produce MgO with different amount of Na content at $500\sim900^{\circ}C$ under air. Investigation of the physical and chemical properties of the various MgO powders with dilution ratio and calcination temperature variation was done by X-ray diffraction, transmission electron microscopy, BET specific surface area and thermal gravimetric analysis. It was observed that MgO particle size could depend on the condition of calcination temperature and dilution ratio of the $Mg(OH)_2$ suspension. The particle size of the MgO depends on the Na content remaining in the $Mg(OH)_2$ powder, which powder was prepared by changing the dilution ratio of the $Mg(OH)_2$ suspension. This change increased as the calcination temperature increased and decreased as the dilution ratio increased. The growth of MgO particle size according to the increase of temperature was more effective when there was a relatively high content of Na. The increase of Na content lowered the temperature at which decomposition of $Mg(OH)_2$ to MgO took place, thereby promoting the crystal growth of MgO.

• Membrane Journal
• /
• v.25 no.1
• /
• pp.75-83
• /
• 2015

In this study, chlorophylls were been extracted from common local plants, deposited on polypropylene (PP) substrate using various approaches, and the oxygen generation effect of the chlorophylls were investigated. The loading of chlorophylls on the substrates was achieved by dipping and spraying methods, where the spraying coating showed overall better results regarding oxygen generation from the combustion experiments in the closed vessel or in the isolated vacuum oven cell than those of dip coating. In addition, a composite substrate was prepared by nylon6/6 nanofiber on the PP substrate, and it exhibited an increase in the activation of chlorophylls. In the case of samples containing titanium dioxide ($TiO_2$), the reaching time of oxygen concentration from 16% to 21% and the combustion test using a candle for a sample with 50% chlorophylls showed similar results to those of a sample without $TiO_2$. As such, combining a spray coating and $TiO_2$ incorporation into gas separation membrane systems are expected to be useful to understand the fundamentals of material properties for their applications as oxygen generation membranes and air filtration systems.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.2
• /
• pp.75-81
• /
• 2017

Modified atmosphere packaging (MAP) of vacuum, 60% $N_2/40%$ $CO_2$, 100% $N_2$ and 100% $CO_2$ were examined to preserve fried fish cakes and extend their shelf life. When product packages in air were stored at 5, 10, and $15^{\circ}C$ with measurement in quality attributes, aerobic bacterial growth was found to be primary quality factor to determine the shelf life of the product. Huang's model was adopted to obtain the parameters for use in shelf life determination for a variety of packaging and storage conditions. Temperature dependence expressed in Arrhenius equation showed activation energies of 139.4 and 41.8 kJ/mol for inverse of lag time and growth rate of the microbial spoilage, respectively. MAP of 100% $CO_2$ could double the product shelf life at $10^{\circ}C$ compared to air package. High $CO_2$ concentration MAP at low temperature was found to be effective to prolong the shelf life.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.164-167
• /
• 2004

This study was carried out to investigate in vitro fertilization and development of in vitro matured pig oocytes inseminated with the Duroc boar sperm by different sperm washing media after thawing of the 5 ml frozen straws. Immature follicular oocytes (30-40) were transferred into each well of a Nunc 4-well multidish containing $500{\mu}l$ mTCM199 maturation medium. The sperm rich portion of ejaculates was collected into a 250 ml insulated vacuum bottle and gradually cooled 22 to $24^{\circ}C$ over a 2 h period. Semen was centrifuged at 800 g for 10 min and the seminal plasma discarded. Sperm were esuspended in a lactose-egg yolk and N-acetyl-Dglucosamine (LEN) diluent to contain $1{\times}10^{9}$ sperm/ml and cooled to $5^{\circ}C$ over a 2 h period. Immediately before freezing, semen was rediluted with an equal volume of LEN+4% glycerol and packed into 5 ml straws. After thawing of the 5 ml straw, the 5 ml semen was diluted with 20 ml Beltsville thawing solution (BTS) at room temperature. Oocytes were inseminated with untreated (unwashed and nonpreincubated) or treated sperm (washed two times in BTS, mTLP-PVA and mTBM media, respectively and nonpreincubated) with $2{\times}10^{7}$ sperm concentration. Oocytes were coincubated for 6 h in $500{\mu}l$ mTBM fertilization. At 6 h after IVF, oocytes were transferred into $500{\mu}l$ NCSU-23 culture medium for further culture of 6 h. Sperm penetration, polyspermy and male pronuclear formation of oocytes at 12 h after IVF and developmental ability of oocytes at 48 h after IVF were evaluated. Sperm penetration rate, male pronuclear formation and rate of cleaved embryos were higher in the BTS, mTLP-PVA and mTBM treatments than the unwashed treatment (p<0.05). The rate of blastocysts from the cleaved oocytes (2-4 cell stage) were higher in the mTLP-PVA treatment than in the unwashed, BTS and mTBM treatments. In conclusion, we recommend the washing of frozen-thawed sperm with mTLP-PVA medium before in vitro fertilization of oocytes in mTBM medium.

• Korean Journal of Clinical Pharmacy
• /
• v.16 no.1
• /
• pp.23-27
• /
• 2006

Doxorubicin (DXR) is a type of anti-cancer drug called an 'anthracycline glycoside', It works by impairing DNA synthesis, a crucial feature of cell division, and thus is able to target rapidly dividing cells. Doxorubicin is a very serious anti-cancer medication with definite potential to do great harm as well as great good. A liquid chromatography-tandem mass spectroscopy (LC-MS/MS) method was developed to identify and quantify DXR in small-volume biological samples. After the addition of internal standard (IS, $5{\mu}L\;of\;1{\mu}M/ml$ daunorubicin methanol solution) into the serum sample, the drug and IS were extracted by methanol. Following vortex for a 1min and centrifugation at 15,000g for 10 min the organic phase was transferred and evaporated under a vacuum. The residue was reconstituted with $350{\mu}L$ of mobile phase and $10{\mu}L$ was injected into C18 column with mobile phase composed of 0.05M ammonium acetate (0.1 M acetic acid adjusted to pH 3.5) and acetonitrile (40:60, v/v). The flow rate was kept constant at $350{\mu}L/min$. The ions were quantified in the multiple reaction mode (MRM), using positive ions, on a triple quadrupole mass spectrometer. The lower limits of quantification for Doxorubicin in plasma and small tissues were approximately 0.5 ng/mL and 0.5 ng/mL respectively. Intra- and inter-assay accuracy (% of nominal concentration) and precision (% CV) for all analytes were within 15%, respectively.

• Membrane Journal
• /
• v.5 no.1
• /
• pp.35-43
• /
• 1995

For several years lots of attempts have been made to establish the liquid membrane-based techniques for separations of gas mixtures especially containing carbon dioxide. A more effective system to separate $CO_{2}$ from flue gases, a circulatory hollow-fiber membrane absorber(HFMA) consisting of absorption and desorption modules with vacuum mode, has been considered in this study. Gas-liquid mass transfer has been modeled on a membrane module with non-wetted hollow-fibers in the laminar flow regime. The influence of an absorbent flow rate on the separation performance of the circulatory HFMA can be predicted quantitatively by obtaining the $CO_{2}$ concentration profile in a tube side. The system of $CO_{2}/N_{2}$ binary gas mixture has been studied using pure water as an(inert) absorbent. As the absorbent flow rate is increased, the permeation flux(i.e., defined as permeation rate/membrane contact area) also increases. The enhanced selectivity compared to the previous results, on the other hand, shows the decreasing behavior. It has been found obviously that the permeation flux depends on the variations of pressure in gas phase of desorption module. From an accurate comparison with the results of conventional flat sheet membrane module, the advantageous permeability of this circulatory HFMA can be clearly ascertained as expected. Our efforts to the theoretical model will provide the basic analysis on the circulatory HFMA technique for a better design and process.

• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.26-32
• /
• 2006

The waste solution discharged from the LCD manufacturing process contains acids like nitric, acetic and phosphoric acid and metal ions such as Al, Mo and other impurities. It is important to remove impurities less than 1 ppm in phosphoric acid to reuse as an etchant because the residual impurities even in sub-ppm concentration in semiconductor materials play a major role on the electronic properties. In this study, a mixed system of solvent extraction, diffusion dialysis and ion-exchange was developed to commercialize in an efficient system fur recovering the high-purity phosphoric acid. By vacuum evaporation, almost 99% of nitric and acetic acid was removed. And by solvent extraction method with tri-octyl phosphate (TOP) as an extractant, the removal of acetic and nitric acid from the acid mixture was achieved effectively at the ratio A/O=1/3 with 4th stage of extraction stage. About 97.5% of Al and 36.7% of Mo were removed by diffusion dialysis. Essentially almost complete removal of metal ions and purification of high-purity phosphoric acid could be obtained by using ion exchange.

• Applied Biological Chemistry
• /
• v.47 no.4
• /
• pp.379-383
• /
• 2004

For the elucidation of substrate specificity to the brown copra meal by Bacillus sp. ${\beta}-mannanase.$, the enzymatic hydrolysate after 24 hr of reaction was heated in a boiling water bath for 10 min, and then centrifuged to remove the insoluble materials from hydrolysates. The major hydrolysates composed of D.P 5 and 7 galactosyl mannooligosaccharides. For the separate of galactosyl mannooligosaccharides, the supernatant solution of 150 ml was put on a first activated carbon column. The column was then washed with 5 l of water to remove mannose and salts. The oligosaccharides in the column were eluted by a liner gradient of $0{\sim}30%$ ethanol, at the flow rate of 250 ml per hour. The sugar composition in each fraction tubes was examined by TLC and FACE analysis. The combined fraction from F3 was concentrated to 30 ml by vacuum evaporator. Then put on a second activated carbon column. The oligosaccharides in the column were eluted by a liner gradient of $0{\sim}30%$ ethanol (total volume: 5 l), at the flow rate of 250 ml per hour. The eluent was collected in 8 ml fraction tubes, and the total sugar concentration was measured by method of phenol-sulfuric acid. The major component of F2 separated by 2nd activated carbon column chromatography were identified $Gal^3Man_4(6^3-mono-{\alpha}-D-galactopyranosyl-{\beta}-mannotetraose)$. To investigate the effects of brown copra meal galactomannooligosaccharides on growth of Bifidobacterium longum, B. bifidum were cultivated individually on the modified-MRS medium containing carbon source such as $Gal^3Man_4$, compared to those of standard MRS medium.

• KSBB Journal
• /
• v.18 no.3
• /
• pp.222-228
• /
• 2003

This study was performed to research a chemo-enzymatic synthesis of sorbitan acrylate. It w as firstly to determine the optimum conditions for D-sorbitol cyclic reaction in the presence of p-toluenesulfonic acid (p-TSA) as catalyst material. It was secondly to find the optimum conditions for sorbitan acrylate synthesis using immobilized lipase Novozym 435 in t-butanol from its materials. The maximum yield of 1,4-sorbitan synthesis were obtained approximately 90% (w/w) at 13$0^{\circ}C$ and 200 mmHg vacuum pressure with 1% (w/w) p-TSA after 150 min reactin time on our experimental system. The product from optimum condition was less color than those obtained at higher temperatures and minimized byproduct and unreacted D-sorbitol. Sorbitan acrylate was synthesized to around 63.5% conversion of 1,4-sorbitan. The experimental optimum condition was found at 5$0^{\circ}C$, atmospheric pressure, 3% (w/v) Novozym 435, 50 g/L 1,4-sorbitan of initial reactant concentration, and 1:3 molar ratio of 1,4-sorbitan to acrylic acid.