• Journal of the Korea Institute of Building Construction
• /
• v.14 no.1
• /
• pp.37-44
• /
• 2014

Recently, many efforts related to the utilization of industrial by-products have been made to reduce carbon dioxide emissions in the construction industry. Of these various efforts, concrete incorporating ground granulated blast furnace slag (BFS) provides many advantages compared to conventional concrete, such as high long-term compressive strength, improved durability and economic benefits because of its latent hydraulic property, and low compressive strength at early curing age. This paper investigates the compressive strength of high-activated ground granulated blast furnace slag blended mortar with slag by-product S type(SBP-S). The results of the experiment revealed that incorporating high-activated ground granulated blast furnace slag would affect the compressive strength of mortar. It was found that increasing the Blaine fineness and replacement ratio of slag by-product S type shows high compressive strength of mortar at early curing age because of its high $SiO_2$ and CaO contents in the slag. It is confirmed that an increase of curing age does not affect the compressive strength of mortar made with slag by-product S type at a high curing temperature. Moreover, it is possible to develop and design concrete manufactured with high-activated ground granulated blast furnace slag as binder considering the acceleration curing conditions and mix proportions.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.204-214
• /
• 2015

Depth map upsampling is an approach to increase the spatial resolution of depth maps obtained from a depth camera. Depth map quality is closely related to 3D perception of stereoscopic image, multi-view image and holography. In general, the performance of upsampled depth map is evaluated by PSNR (Peak Signal to Noise Ratio). On the other hand, time-consuming 3D subjective tests requiring human subjects are carried out for examining the 3D perception as well as visual fatigue for 3D contents. Therefore, if an objective metric is closely correlated with a subjective test, the latter can be replaced by the objective metric. For this, this paper proposes a best metric by investigating the relationship between diverse objective metrics and 3D subjective tests. Diverse reference and no-reference metrics are adopted to evaluate the performance of upsampled depth maps. The subjective test is performed based on DSCQS test. From the utilization and analysis of three kinds of correlations, we validated that SSIM and Edge-PSNR can replace the subjective test.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.1
• /
• pp.1-6
• /
• 1984

Soils in Cheju Island, derived mostly from volcanic ashes, were collected for chemical analysis to determine the effect of land utilization pattern on soil chemical characteristics. The coastal area has long been used for intensive farming and some of the mid-mountain region were recently reclaimed for agricultural crop production. The cation exchange capacity and the organic matter in the soils increased in the order of coastal area < mid-mountain belt < upper mountain area, while pH, base saturation, available phosphorus and exchangeable bases decreased with the elevation. Generally, the organic matter, the cation exchange capacity and the exchangeable bases of the Cheju soils were found to be considerably higher than the Korean mainland soils. However, the base saturation and the available phosphorus were far below the mainland average. The ratio of monovalent basic cations to total exchangeable bases showed the highest in the soils of the mountain belts and the lowest in the coastal area soils. These data suggest that a higher soil pH in the coastal area as compared to the mountainous slopes has resulted not from the sea water but from continuous application of alkaline fertilizers and times.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.4
• /
• pp.611-619
• /
• 2018

Basalt powder sludge (abbreviated BPS) is an inevitable industry by product resulted from the stone processing. Recently, demands for natural materials have been increasing in the construction and landscaping fields, therefore, amounts of BPS have been also increasing. Since most of BPS are used as landfill and earth soil, it is necessary to figure out to expedite their utilization. In this study, by considering the characteristics of precipitation of Jeju, effectiveness of BPS as a filler for asphalt compounds mixed with cement were analyzed. As a result, BPS satisfies quality criterion required in KS F 3501. Marshall mixing designs were performed to determine the optimal asphalt content for the Modified recycling asphalt mixture (27% recycling aggregate) and the Normal asphalt mixture. Effectiveness of BPS were identified by the Marshall Stability Test with the mixing ratio (level 3) of two asphalt compounds and composition ration (level 3) of BPS and cement. Performance of asphalt compounds shown appropriate effect of mixing and composition ratios of the filler were assessed. Test results show that two types of asphalt compounds satisfy the quality standards of the MLIT (2015). Therefore, BPS could be used as filler for asphalt compounds.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.2
• /
• pp.222-229
• /
• 2016

Corni fructus is often distributed or processed in the form of dried fruit. However, Corni fructus is hard to develop due to its distinctive sour, bitter, and astringent taste. The aim of this study was to develop a puree to broaden the utilization of fresh Corni fructus. Manufacturing and quality characteristics of Sansuyu jam made from puree were investigated. Seeded Corni fructus pulp consisted of 20 to 26% whole fruit. The moisture and sugar contents of pulp were 52~63% and $15{\sim}31^{\circ}Brix$, respectively. Sterilized distilled water was added to seeded pulp to achieve a constant solids content in the puree. As the pectin content was low as $0.14{\pm}0.01%$, gelling agent was added to produce jam. The moisture content of the puree increased to 83~88%. The sugar content was reduced to $10^{\circ}Brix$. There was no significant difference in pH. DPPH radical scavenging activities of the puree according to ripening rate at a concentration of 100 ppm were 47.92% and 50.96%, respectively. The preference degree was $5.03{\pm}0.97$ at a ripening ratio of 50:50, 2% pectin, and 0.2% carrageenan. These results imply that Corni fructus pulp puree may be appropriate for development as a natural food product.

• Applied Biological Chemistry
• /
• v.32 no.4
• /
• pp.424-434
• /
• 1989

The rationale for the use of fungi in treating waste streams from food processing plants I~as been that of incorporating the dissolved and suspending nutrients into a macroscopic organism which can be filtered out readily. In order for a process using fungi to meet these objectives we examined a strain of fungi, Aspergillus fumigatus, which grew well on a variety of polysaccharide-containing materials and showed both efficient BOD removal and high quality protein recovery. In this experiment the fungal choice was based on the laboratory screening studies where the criteria used was BOD and COD reduction, growth response, mycelial yield, and the ability to compete with the natural flora. In the fermentation system used far the continuous culture of Aspergillus fumigatus the best combination of operating variables, inoculum ratio, temperature, initial pH, fermentation time and agitation rate was 5%(v/v), $35{\sim}40^{circ}C,\;pH\;4.5{\sim}5.0$, 2days and 150rpm, respectively. The fungus reduced BOD and COD to 94.0 and 90.4%, respectively and 3.15g of dry mycelium per liter of alcohol waste was harvested during 48hr of incubation time. The protein efficiency ratios for the control diet and the experimental diet containing the fungal protein were $3.42{\pm}0.15$ and $3.40{\pm}0.43$, respectively.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.5
• /
• pp.277-283
• /
• 2013

Purpose: Well vascularized pectoralis major myocutaneous flap (PMMF) had been a commonly used versatile flap in reconstructive oromaxillofacial surgery since the 1970s. However, after the advent of microvascular surgery in the 1980s, the PMMF was used less frequently. But, to date, PMMF has been useful and has some advantages such as covering wide defects, covering vital structures, back-up procedure in cases of free flap failure, and reconstruction for radiotherapy patients. The purpose of this study is to evaluate the role, indication, complications, functional, and aesthetic results of this flap in the era of free flap with a literature and chart review. Methods: A retrospective study was conducted of 16 oral cancer patients undergoing reconstructive surgery with PMMF for reconstruction of defects from 2001 to 2012 at Kyungpook National University Hospital. The male to female ratio was 10:6, with a mean age of 63 years (16~79 years). Basic demographic data, previous treatment history, indications, dimension of the flap, site of reconstruction, postoperative complications, and patients' final status were systemically analyzed from chart review. Results: The pathology of the disease included squamous cell carcinoma in the majority of cases (n=14). The remaining cases were fibrosarcoma and mucoepidermoid carcinoma. Of the 16 PMMF reconstructions, 13 flaps were applied as primary reconstructive procedures, whereas three flaps were; salvage; procedures (vascularized free flap failure). Twelve patients had complications such as wound dehiscence, infection, hematoma, fistula, flap bulkiness, and partial flap necrosis. The higher complication rates showed an association with utilization of the flap in preoperative radiotherapy cases. However, all patients were discharged without failure. Conclusion: In reconstructive oromaxillofacial surgery, the PMMF is still a useful flap for huge defects. In addition, the PMMF can be used as a salvage procedure after vascularized free flap failure and reconstruction for patients with a history of preoperative radiotherapy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.5
• /
• pp.641-648
• /
• 2006

In an attempt to get basic data for the utilization of saltwort powder (Salicornia herbaceae L.) as a ingredient in the Sulgidduk. D-optimal design of mixture design showed 14 experimental points including 4 replicates for three independent variables. The three independent variables selected for the experiment were water ($13{\sim}18%$), saltwort powder ($2{\sim}6%$), and sugar ($8{\sim}13%$). The optimum responses variables such as color value. texture, and sensory characteristics were evaluated. The compositional and functional properties of test were measured, and these values were applied to the mathematical models. According to the result of measuring probability of the color value, texture and sensory characteristics were respectively and significance was acknowledged (p<0.05). According to the result of F-test, color values (L, a, b), textural properties (gumminess, chewiness) and sensory characteristics (taste, softness) decided linear model, textural property (hardness) and sensory characteristics (color, smell, moistness, overall acceptance) decided quadratic model. A canonical form and trace plot showed that the influence of each ingredient on the mixture final product. An optimum formulation by numerical and graphical methods were similar. Water, saltwort powder, and sugar were 15.2%, 3.0%, and 9.8% respectively by numerical method, and 15.2%, 3.1%, and 9.7% respectively by graphical method.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.233-238
• /
• 2008

Korea has a high volume of exhaust in environmental pollutants compared to her economic size, which results from the increase of the ratio in high energy consuming industries. There arises an issue that efficient energy saving is not achieved in the related projects of the construction, which is one of the high energy consuming industries. In addition, such projects of dismantling old and decrepit buildings are frequent in recent years. Given the situation, to obtain much better effects of energy saving, it is necessary to build basic databases and develop utilization plans on energy consumption volume, exhaust volume of pollutants, and environmental expenses that come from the dismantlement stages out of the life cycle of construction projects. Therefore, this study calculates the exhaust volume of environmental pollutants, converts it into environmental expenses by pollutants, and evaluates the environmental economics on the projects of dismantling buildings, utilizing LCI DB that is suggested by Ministry of Knowledge Economy and Ministry of Environment. For this purpose, related data research, the existing literature study, and on-the-spot field investigation were conducted. Based on the results of analysis on the collected data, the environmental economics of the target building was evaluated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.343-350
• /
• 2012

A planar solid oxide fuel cell (PSOFC) is studied in its application in a high-temperature stationary power plant. Even though PSOFCs with external reformers are designed for application from the distributed power source to the central power plant, such PSOFCs may sacrifice more system efficiency than internally reformed SOFCs. In this study, modeling of the PSOFC with an external reformer was developed to analyze the feasibility of thermal energy utilization for the external reformer. The PSOFC system model includes the stack, reformer, burner, heat exchanger, blower, pump, PID controller, 3-way valve, reactor, mixer, and steam separator. The model was developed under the Matlab/Simulink environment with Thermolib$^{(R)}$ modules. The model was used to study the system performance according to its configuration. Three configurations of the SOFC system were selected for the comparison of the system performance. The system configuration considered the cathode recirculation, thermal sources for the external reformer, heat-up of operating gases, and condensate anode off-gas for the enhancement of the fuel concentration. The simulation results show that the magnitude of the electric efficiency of the PSOFC system for Case 2 is 12.13% higher than that for Case 1 (reference case), and the thermal efficiency of the PSOFC system for Case 3 is 76.12%, which is the highest of all the cases investigated.