• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.748-750
• /
• 2005

This paper approaches a methodology for deciding the optimal reliability criteria for an optimal composite power system expansion planning considering generation and transmission systems simultaneously. A probabilisticreliability criterion, $LOLE_R$(Loss of Load Expectation), is used in this study. The optimalreliability criterion $LOLE_R*$ is decided at minimum cost point of total cost curve which is the sum of the utility cost associated with construction cost and the customer outage cost associated with supply interruptions for load considering forced outage rates of elements(generators and lines) in long term forecasting. The characteristicsand effectiveness of this methodology are illustrated by the case study using MRBTS size system.

• Journal of Sensor Science and Technology
• /
• v.21 no.5
• /
• pp.374-378
• /
• 2012

Biofouling causes many problem in industrial processes, medical health industries, water utilities and our daily life. So detecting formation of biofilm on the surface of medical appliance, water pipe and industrial utility is highly important to prevent the problem caused by biofouling. In this study, we suggest an electrochemical sensor for detecting biofilm. We fabricated the electrochemical sensor in MEMS process and cultivated two different kinds of Pseudomonas aeruginosa RpoN type and Wild type on the surface of electrochemical sensor. Each group of Pseudomonas aeruginosa was cultivated according to the hours of 2, 4, 6, 8, 12 and 24. Then we investigated changes in degree of biofilm cultivation using cyclic voltammetry. As a result, it was observed that peak of the cyclic voltammetry curve is increased according as the biofilm growth on the surface of electrochemical sensor. Also we can discern between Pseudomonas aeruginosa RpoN type and Wild type.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.59-64
• /
• 2006

In this study, adsorption characteristics of PCBs on granular activated carbon were experimentally investigated in a batch reactor and in a fixed bed reactor. Granular activated carbon removed above 98.4% of initial concentration, 1000mg/L, of PCBs. It was estabilished that the adsorption equilibrium of PCBs on granular activated carbon was more successfully fitted by Freundlich isotherm equation in the concentration range from 1 to 1000mg/L. Because Freundlich parameter, ${\beta}$ is 0.346, removall treatment of PCBs by activated carbon accounts for the fact that toxicity reduction can be achieved through this process. Appearance time of breakthrough curve is faster with the increase flow rate and inflow concentration of liquid. The utility of granular activated carbon is enhanced with the increase of bed height and with the decrease of inflow rate.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.3
• /
• pp.98-102
• /
• 2011

This paper proposes a method of a touch-based remote control and sensor information acquisition of a mobile robot using a smart phone. An application in a smart phone processes the acquired sensor information and conducts autonomous navigation. By touching the screen of the smart phone, a series of points obtained from designated curve traces are analyzed and provide control of a robot. This study develops a mobile application that acquires and handles data from a mobile robot and sends appropriate action commands through remote control using Bluetooth communication with a smart phone. The utility and performance of the proposed control scheme have been successfully verified through experimental tasks using an actual smart phone and a mobile robot.

• IE interfaces
• /
• v.6 no.2
• /
• pp.151-169
• /
• 1993

In this research, we proposed "coefficient of inequality" as a measure of distributional inequality for an alternative, which is defined as the area between the diagonal line from 0 to 1 and the Lorenz curve of the given alternative. Next, we showed theoretical relationship between stochastic dominance and the coefficient of inequality as a means to determine the preferred alternative when decision is made with incomplete information about decision maker's utility function. Then, two experiments were performed to test subject‘s attitude toward risk. The results of the experiments support the idea that when a decision maker is risk averse or risk prone, he/she can use the coefficient of inequality as a decision rule to choose the preferred alternative instead of using stochastic dominance. Thus, according to decision maker’s attitude toward risk, the decision rule proposed here can be used as a valuable aid in decision making under uncertainty with incomplete information.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.75-79
• /
• 2016

Purpose The ASAN Medical Center, Nuclear Medicine performs TSH (Thyroid stimulating hormone) and FT4 (Free Thyroxine) tests 8 times per day. Accordingly, 70 ~ 80 kit tubes are consumed every day for the measurements and the time consumed for reagent dispensing averages over 170 seconds, where the TAT (turnaround time) may be effected when the number of test samples is larger than expected. Therefore, the following test was conducted with the purpose to reduce the number of kit tubes consumed, and reduce the time for reagent dispensing. Materials and Methods The test is based on applying the same reagent for tests where the number of samples is 30 or less. The test for TSH was conducted 9 times from July $1^{st}$ 2015 to July $10^{th}$ 2015. The test for FT4 was conducted 4 times from June $18^{th}$ 2015 to June $22^{nd}$, 2015. Standard Solution No.2 (0.153 uU/mL) and No.5 (4.96 uU/mL) was selected as the two-point standards for the TSH test, and Standard Solution No.3 (0.777 ng/dL) and No.4 (2.044 ng/dL) was selected as the two-point standards for the FT4 test. 38 test samples were subject to correlation analysis. Results For TSH, the result of the normal test shows ranges of 0.20 ~ 0.37 uU/mL for Control1, 0.53 ~ 0.71 uU/mL for Control2, and 6.77 ~ 7.94uU/mL for Control3, while the result of two-point calibration curve test shows ranges of 0.18 ~ 0.27 uU/mL for Control1, 0.53 ~ 0.71 uU/mL for Control2, and 7.30 ~ 8.52 uU/mL for Control3. For FT4, the result of the normal test shows ranges of 0.85 ~ 0.94 ng/dL for Control1 and 4.23 ~ 4.57 ng/dL for Control2, while the result of two-point calibration curve test shows ranges of 0.61 ~ 0.75 ng/dL for Control1 and 3.88 ~ 5.71 ng/dL for Control2. For TSH, the CV% of the normal test for Control1, Control2 and Control3 are 10.5, 3.3 and 3.6 respectively, while the CV% of the two-point calibration curve test for Control1 and Control1 are 12.4, 8.2 and 5.1 respectively. The result shows an outstanding correlation of TSH: y = 0.9985x - 0.0459 $R^2=0.9986$. For FT4, the CV% of the normal test for Control1 and Control2 are 0.70 and 0.71 respectively, while the CV% of the two-point calibration curve test for Control1 and Control1 are 8.7 and 16.2 respectively. The result shows an outstanding correlation of FT4: y = 1.2674x - 0.1133 $R^2=0.9824$. Conclusion The two-point calibration curve can be efficiently applied for TSH in cases where the number of test samples is not large, since the number of samples to be re-tested increases when the result is abnormal from the calibration curve. The two-point calibration curve test should not be applied for FT4 where the results do not consistently comply with the quality assessment range. Depending on how the two-point calibration curve is applied, up to 5 test tubes can be conserved per test, and the reduced time for reagent dispensing is anticipated to have a positive effect on the TAT (turnaround time).

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.85-93
• /
• 2011

In this paper, we analyzed the function elements of the Integrated meter reading system based on PLC which is working in Mok-dong, Seoul and studied how to improve the vulnerability. Also we propose an efficient method for the estimation of abnormal life status through frequency domain processing of utility meter readings. We found out that even after removing the high-frequency components from the raw meter data, the shape of the graph still maintains the original graph characteristics. The graph of the inverse transformed data has simpler and smoother curve than the original graph pattern. The original graph is not good to be used in deciding whether the residence's life pattern is normal or not. We could find out that the graph which is processed frequency signal has simple and intuitive graph pattern.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.14 no.2
• /
• pp.107-114
• /
• 2016

Purpose: The incidence of glufosinate poisoning is gradually increasing, and it can be fatal if severe poisoning occurs. However, factors useful for predicting the post-discharge neurological prognosis of patients who have ingested glufosinate have yet to be identified. Our objective was to evaluate the utility of the acute physiology and chronic health evaluation (APACHE) II score measured in the emergency department for predicting the neurological prognosis. Methods: From April 2012 to August 2014, we conducted a retrospective study of patients who had ingested glufosinate. The outcome of the patients at discharge was defined by the Cerebral Performance Category Score (CPC). The patients were divided into a good prognosis group (CPC 1, 2) and a poor prognosis group (CPC 3, 4, 5), after which the APACHE II scores were compared. The Hosmer-Lemeshow test and the area under the receiver operating characteristic (ROC) curve from patients determined calibration and discrimination. Results: A total of 76 patients were enrolled (good prognosis group: 67 vs poor prognosis group: 9). The cut-off value for the APACHE II score was 12 and the area under the curve value was 0.891. The Hosmer and Lemeshow C statistic x2 was 7.414 (p=0.387), indicating good calibration for APACHE II. Conclusion: The APACHE II score is useful at predicting the neurological prognosis of patients who have ingested glufosinate.

• Tuberculosis and Respiratory Diseases
• /
• v.62 no.6
• /
• pp.499-505
• /
• 2007

Background: Triggering receptor expressed on myeloid cells 1 protein (TREM-1) is a cell surface molecule expressed on neutrophils and monocytes, and it plays an important role in myeloid cell-activated inflammatory response. The aim of this study was to investigate the diagnostic efficiency of soluble (s) TREM-1 in the patients who had pleural effusion from various causes. Methods: Forty-five patients with exudative pleural effusion were included in this study. The level of sTREM-1 was measured in both the serum and pleural fluids by immunoblot assay with using human-sTREM-1 antibody. Results: The pleural fluid sTREM-1 was significantly different in the three groups of exudative pleural effusion (p=0.011). Particularly, the patients with parapneumonic effusion were found to have significantly higher pleural fluid levels of sTREM-1 than patients with tuberculous (p<0.05) and malignant effusion, respectively (p<0.05). However, the serum sTREM-1 did not show a significant difference in the three groups. In order to evaluate the diagnostic utility of pleural fluid sTREM-1, the receiver operating characteristic (ROC) curve was constructed and the area under the curve (AUC) was 0.818 (p=0.001). Using a cutoff value of 103.5 pg/mL for the pleural fluid sTREM-1, the sensitivity and specificity were 73% and 81%, respectively, for differentiating parapneumonic effusion from tuberculous or malignant effusions. Conclusion: Pleural fluid sTREM-1 can be an additional marker for making the differential diagnosis of pleural effusion.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.2
• /
• pp.10-16
• /
• 2000

The purpose of this study is to identify relationships between a central angle and a radius of curvature of divided roads in flat terrain of traditional villages, suggesting layout criteria for traditional villages: Nak-an, Sung-Eup, Ha-Whe. This study is sought to find the optimum model through the various SAS regression analyses. a regression analysis of this data was adopted to induce the relationship formula between a central angle of curve and a radius of curvature. Results of this study are as follows: 1) Most of the divided roads in traditional villages have a complex curve rather than a simple curve. 2) A central angle of curve has ranged from 11$^{\circ}$to 127$^{\circ}$, with a mean degree of 63.9. 3) In the lower level of central angle(11-40$^{\circ}$), the branch roads have distributed with a high frequency, but with a low frequency in the higher level of central angle(90-140$^{\circ}$). 4) A radius of curvature in the divided roads has ranged from 0.9m to 59.6, but half of the roads have concentrated on 1-6m of the curvature. 5) Compared to the result of hilly villages in previous study(Ahn, 1999), value of central angels in flat villages is lower than that of hilly villages, while a mean value of the curvature is higher than that of hilly villages. 6) A Non-linear regression analysis, resulting from the SAS application, was useful method to induce a relationship formula between a central angle and a radius of curvature in the branch roads. Our study's formula is as follow: R=100.3*EXP(-0.06*$\delta$)+3.91. 7) Our study model has less error than that of the Kishizuka's method, being applicable to a broader range of the branch roads. 8) A minimum radius of curvature in our study has showed 3.9m, suggesting to reconsider applications of the Kishizuka's(5.8m) in the footpass design, In the study for this presupposition model the efficiency and utility of it can be estimated to grow large according to how much and how far it includes both extremes of data. This study is for the application to a design in future through the numerical formula of divided roads of various traditional villages. The studies from now on will be about the quasi-hilly quasi-hilly village and hilly village supplementing these factors more.