• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.75-82
• /
• 2023

Data for measuring the flow rate of streams are used as important basic data for the development and maintenance of water resources, and many experts are conducting research to make more accurate measurements. Especially, in Korea, monsoon rains and heavy rains are concentrated in summer due to the nature of the climate, so floods occur frequently. Therefore, it is necessary to measure the flow rate most accurately during a flood to predict and prevent flooding. Thus, the U.S. Geological Survey (USGS) introduces 1, 2, 3 point method using a flow meter as one way to measure the average flow rate. However, it is difficult to calculate the average flow rate with the existing 1, 2, 3 point method alone.This paper proposes a new 1, 2, 3 point method formula, which is more accurate, utilizing one probabilistic entropy concept. This is considered to be a highly empirical study that can supplement the limitations of existing measurement methods. Data and Flume data were used in the number of holesman to demonstrate the utility of the proposed formula. As a result of the analysis, in the case of Flume Data, the existing USGS 1 point method compared to the measured value was 7.6% on average, 8.6% on the 2 point method, and 8.1% on the 3 point method. In the case of Coleman Data, the 1 point method showed an average error rate of 5%, the 2 point method 5.6% and the 3 point method 5.3%. On the other hand, the proposed formula using the concept of entropy reduced the error rate by about 60% compared to the existing method, with the Flume Data averaging 4.7% for the 1 point method, 5.7% for the 2 point method, and 5.2% for the 3 point method. In addition, Coleman Data showed an average error of 2.5% in the 1 point method, 3.1% in the 2 point method, and 2.8% in the 3 point method, reducing the error rate by about 50% compared to the existing method.This study can calculate the average flow rate more accurately than the existing 1, 2, 3 point method, which can be useful in many ways, including future river disaster management, design and administration.

• Journal of Service Research and Studies
• /
• v.13 no.3
• /
• pp.172-189
• /
• 2023

This study investigated the potential contribution of ChatGPT, a massive language and information model, in the decision-making process of public design policies, focusing on the characteristics inherent to public design. Public design utilizes the principles and approaches of design to address societal issues and aims to improve public services. In order to formulate public design policies and plans, it is essential to base them on extensive data, including the general status of the area, population demographics, infrastructure, resources, safety, existing policies, legal regulations, landscape, spatial conditions, current state of public design, and regional issues. Therefore, public design is a field of design research that encompasses a vast amount of data and language. Considering the rapid advancements in artificial intelligence technology and the significance of public design, this study aims to explore how massive language and information models like ChatGPT can contribute to public design policies. Alongside, we reviewed the concepts and principles of public design, its role in policy development and implementation, and examined the overview and features of ChatGPT, including its application cases and preceding research to determine its utility in the decision-making process of public design policies. The study found that ChatGPT could offer substantial language information during the formulation of public design policies and assist in decision-making. In particular, ChatGPT proved useful in providing various perspectives and swiftly supplying information necessary for policy decisions. Additionally, the trend of utilizing artificial intelligence in government policy development was confirmed through various studies. However, the usage of ChatGPT also unveiled ethical, legal, and personal privacy issues. Notably, ethical dilemmas were raised, along with issues related to bias and fairness. To practically apply ChatGPT in the decision-making process of public design policies, first, it is necessary to enhance the capacities of policy developers and public design experts to a certain extent. Second, it is advisable to create a provisional regulation named 'Ordinance on the Use of AI in Policy' to continuously refine the utilization until legal adjustments are made. Currently, implementing these two strategies is deemed necessary. Consequently, employing massive language and information models like ChatGPT in the public design field, which harbors a vast amount of language, holds substantial value.

• 한국체육학회지인문사회과학편
• /
• v.51 no.3
• /
• pp.373-382
• /
• 2012

The purpose of this study is to predict VO₂max with body index and submaximal metabolic responses. The subjects are consisted of 250 male aging from 18 to 34 and we separated them into two groups randomly; 179 for a sample, 71 for a cross-validation group. They went through maximal exercise testing with Bruce protocol, and we measured the metabolic responses in the end of the first(3 minute) and second stage(6 minute). To predict VO₂max, we applied multiple regression analysis to the sample with stepwise method. Model 1's variables are weight, 6 minute HR and 6 minute VO₂(R=0.64, SEE=4.74, CV=11.7%, p<.01), and the equation is VO₂max(ml/kg/min)= 72.256-0.340(Weight)-0.220(6minHR)+0.013(6minVO₂). Model 2's variables are weight, 6 minute HR, 6 minute VO₂, and 6 minute VCO₂(R=0.67, SEE=4.59, CV=11.3%, p<.01), and the equation is VO₂max(ml/kg/min)= 68.699-0.277(Weight) -0.206(6minHR)+0.020(6minVO₂)-0.009(6minVCO₂). And the result did not show multicolinearity for both models. Model 2 demonstrated more correlation compared to Model 1. However, when we conducted cross-validation of those models with 71 men, measured VO₂max and estimated VO₂ Max had statistical significance with correlation (R=0.53, 0.56, P<.01). Although both models are functional with validity considering their simplicity and utility, Model 2 has more accuracy.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.116-131
• /
• 2001

Experiments were conducted to determine effects of whole and processed corns on in situ disappearance rates of nutrients in the rumen and in vitro degradability of dry matter by rumen microorganisms. Whole corn(WC) was processed into four different types; ground corn(GC), cracked corn(CC), flaked corn(FC), and soaked corn(SC). In the in situ experiment, the rate of ruminal DM disappearance after 48 hour incubation was highest in GC(76.1%) and lowest in WC and SC(12% ; P<0.01). The rate of ruminal CP disappearance after 48 hour incubation was highest in GC and CC(48 and 38%, respectively; P<0.01). The rate of ruminal OM disappearance after 48 hour incubation was highest in GC(76.14%) and lowest in WC and SC(11.82 and 12.26%, respectively; P<0.01). In the in vitro experiment, the two-stage incubation technique was used to measure digestibilities of whole and processed corns. The digestibility of DM was higher in GC, CC and FC(86.95, 85.84 and 82.29%, respectively) than in WC(15.36%; P<0.01).

• The Journal of Korean Society for Radiation Therapy
• /
• v.34
• /
• pp.13-20
• /
• 2022

Purpose : IMRT using Tomotherapy during nasopharyngeal cancer radiation therapy irradiate an accurate dose to tumor tissues and is effective to reduce a dose rapidly in normal tissues. However, this has high MU and long Beam On Time. This study aims to analyze differences in tumors, normal tissues and low-dose distributions and the efficiency of Split VMAT after applying Helical IMRT (Tomotherapy), VMAT (Linac : 2Arc) and Split VMAT (Linac : 4Arc) plans. Materials and Methods : This study targeted ten nasopharyngeal cancer patients of this hospital and compared three treatment plans (Helical IMRT, VMAT, Split VMAT). For Helical IMRT planning, Precision^® (Version 1.1.1.1, Accuray, USA) was used, and for VMAT and Split VMAT planning, Pinnacle^3® (Version 9.10, Philips, USA) was used. The total dose applied was 38.4 Gy / 32 Gy (Daily Dose 2.4 Gy (GTV + 0.3 cm) / 2 Gy (CTV + 0.3 cm) 16Fx), and for GTV + 0.3 cm (P_GTV), 95% of V_38.4Gy was prescribed. VMAT with an angle of 360° 2Arc was applied, and for Split VMAT, the field was divided into the right, the left, the top and the bottom and an angle of 360° 4Arc, 6MV was set. For evaluating the quality of the treatment plans, differences in tumors, normal tissues and low-dose area were compared, and Beam On Time was measured to analyze the efficiency. Results : When calculating the mean values of evaluation items of the three treatment plans (Helical IMRT, VMAT, Split VMAT) for the patients, the H.I (Homogeneity Index) of P_GTV was 1.04, 1.11 and 1.1 respectively, and the C.I (Confomity Index) of P_CTV was 1.03, 0.99 and 1.00 respectively. The mean dose of RT Parotid Gland (Gy) was 14.54, 17.06 and 14.76 respectively, the mean dose of LT Parotid Gland (Gy) was 14.32, 17.32 and 15.09 respectively, the maximum dose of P_Cord (Spinal Cord + 0.3 cm) (Gy) was 20.57, 22.59 and 21.06 respectively, and the maximum dose of Brain Stem (Gy) was 22.35, 23.99 and 21.68 respectively. The 50% isodose curve (cc) was 1332, 1132.5 and 1065.2 respectively. Beam On Time (sec) was 373.7, 130.7 and 254.4 respectively. Conclusion : Displaying a similar treatment plan quality to Helical IMRT, which is used a lot for head and neck treatment, Split VMAT reduced the low-dose area and Beam On Time and produced a better result than VMAT. Therefore, it is considered that Split VMAT is effective not only for nasopharyngeal cancer but also for other head and neck cancers.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.53-65
• /
• 2022

According to the advancement of the GNSS satellite positioning system, the module of hardware and operation software reflecting accuracy and economical efficiency is implemented in the user sector including the multi-channel GNSS receiver, the multi-frequency external antenna and the mobile app (App) base public positioning analysis software etc., and the multichannel GNSS RTK positioning of the active configuration method (DIY, Do it yourself) is possible according to the purpose of user. Especially, as the infrastructure of multi-GNSS satellite is expanded and the potential of expansion of utilization according to various modules is highlighted, interest in the utilization of multi-channel low-cost GNSS receiver module is gradually increasing. The purpose of this study is to review the multi-channel low-cost GNSS receivers that are appearing in the mass market in various forms and to analyze the utilization plan of the "address information facility investigation project" of the Ministry of Public Administration and Security by constructing the multi-channel low-cost GNSS positioning module based RTK survey system (hereinafter referred to as "multi-channel GNSS RTK module positioning system"). For this purpose, we constructed a low-cost "multi-channel GNSS RTK module positioning system" by combining related modules such as U-blox's F9P chipset, antenna, Ntrip transmission of GNSS observation data and RTK positioning analysis app through smartphone. Kinematic positioning was performed for circular trajectories, and static positioning was performed for address information facilities. The results of comparative analysis with the Static positioning performance of the geodetic receivers were obtained with 5 fixed points in the experimental site, and the good static surveying performance was obtained with the standard deviation of average ±1.2cm. In addition, the results of the test point for the outline of the circular structure in the orthogonal image composed of the drone image analysis and the Kinematic positioning trajectory of the low cost RTK GNSS receiver showed that the trajectory was very close to the standard deviation of average ±2.5cm. Especially, as a result of applying it to address information facilities, it was possible to verify the utility of spatial information construction at low cost compared to expensive commercial geodetic receivers, so it is expected that various utilization of "multi-channel GNSS RTK module positioning system"

• Korean Journal of Remote Sensing
• /
• v.39 no.2
• /
• pp.233-246
• /
• 2023

In terms of understanding the water cycle and efficient water resource management, the importance of soil moisture has been highlighted. However, in Korea, the lack of qualified in-situ soil moisture data results in very limited utility. Even if satellite-based data are applied, the absence of ground reference data makes objective evaluation and correction difficult. The cosmic-ray neutron probe (CRNP) can play a key role in producing data for satellite data calibration. The installation of CRNP is non-invasive, minimizing damage to the soil and vegetation environment, and has the advantage of having a spatial representative for the intermediate scale. These characteristics are advantageous to establish an observation network in Korea which has lots of mountainous areas with dense vegetation. Therefore, this study was conducted to evaluate the applicability of the CRNP soil moisture observatory in Korea as part of the establishment of a Korean cOsmic-ray Soil Moisture Observing System (KOSMOS). The CRNP observation station was installed with the Gunup-ri observation station, considering the ease of securing power and installation sites and the efficient use of other hydro-meteorological factors. In order to evaluate the CRNP soil moisture data, 12 additional in-situ soil moisture sensors were installed, and spatial representativeness was evaluated through a temporal stability analysis. The neutrons generated by CRNP were found to be about 1,087 counts per hour on average, which was lower than that of the Solmacheon observation station, indicating that the Hongcheon observation station has a more humid environment. Soil moisture was estimated through neutron correction and early-stage calibration of the observed neutron data. The CRNP soil moisture data showed a high correlation with r=0.82 and high accuracy with root mean square error=0.02 m³/m³ in validation with in-situ data, even in a short calibration period. It is expected that higher quality soil moisture data production with greater accuracy will be possible after recalibration with the accumulation of annual data reflecting seasonal patterns. These results, together with previous studies that verified the excellence of CRNP soil moisture data, suggest that high-quality soil moisture data can be produced when constructing KOSMOS.

• Korean Journal of Poultry Science
• /
• v.50 no.2
• /
• pp.91-99
• /
• 2023

This study aimed to develop a high-productivity breed of Korean native Samgye chicken. We evaluated the production performance of six Korean native chicken combinations (KNC-SCYC, SCYD, SDYC, SDYD, SYYC, SYYD) and GSP-Hanhyup Korean native chickens, with Baeksemi chickens used as a control group. The performance test was conducted from hatching to 7 weeks of age on 756 chickens, and we measured survival rate, body weight, shank length, feed utility, and carcass yield. The overall survival rate was nearly 100% for all strains. However, body weight showed significant differences between strains at all ages (P<0.01), with Baeksemi weighing 863.8±76.9 g, GSP-Hanhyup weighing 804.7±72.5 g, and KNC-combinations weighing 543.0±61.8 g at 5 weeks of age. The duration needed to reach 850 g was estimated to be 34.5 days for Baeksemi, 37.5 days for GSP-Hanhyup, and 45.8-48.8 days for KNC-combinations. Carcass yield percentage was highest for KNC-SYYD combination at 63.3%, followed by Baeksemi at 60.4%, and GSP-Hanhyup at 56.1%. Shank length at 850 g body weight was 7.6 cm for KNC-SYYD combination, 7.8 cm for Baeksemi, and 8.0 cm for GSP-Hanhyup. The feed conversion ratio at 850 g body weight was 1.81 for Baeksemi, 2.17 for GSP-Hanhyup, and 2.27 for KNC-SCYC combination. Our results suggest that the KNC-SYYD combination and GSP-Hanhyup breed have the potential to be used in Samgye production due to their moderate growth performance, higher carcass yield, and shorter shank length, despite their lower growth productivity and feed efficiency when compared to Baeksemi.

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.4
• /
• pp.428-436
• /
• 2019

As the main objective of rice breeding programs, rice eating quality is one of critical factors directly determining the market price and the consumer preference. However, the genetic complexity of eating quality and the difficulty in accurate evaluation often constrain improvement of the eating quality in rice breeding programs. In addition, given that the rice eating quality of current cultivars has already reached some high-level, diversifying of genetic resources are demanded more than ever to improve the rice eating quality. In this study, we developed a recombinant inbred lines (RILs) population derive from Wandoaengmi6, a japonica-type Korean weedy rice with high eating quality and a high degree of glossiness of cooked rice. Year-to-year correlations between the traits in three years were shown normal distribution for major agronomic traits and physicochemical characteristics. After evaluating tested traits related to eating quality procedure, a total of ten lines were ultimately selected from the population. Increasement of the taste of cooked rice (TA) and the overall eating quality (OE) were confirmed in the selected lines, which are caused by alleles derived from Wandoaengmi6 without any linkage drag. These results indicate that the utility of wide genomic resources in Korean landrace could be of application in various rice breeding programs and countermeasure to contribute to properly response to climate change.

• Asia Marketing Journal
• /
• v.14 no.1
• /
• pp.53-81
• /
• 2012

Constructing attractive bundle offers depends on more than an understanding of the distribution of consumer preferences. Consumers are also sensitive to the framing of price information in a bundle offer. In classical economic theory, consumers' utility should not change as long as the total price paid stays same. However, even when total prices are identical, consumers' preferences toward a bundle product could be different depending on the format of price presentation and the locus of price discount. A weighted additive model predicts that the impact of a price discount on the overall evaluation of the bundle will be greater when the discount is assigned to the more important product in the bundle(Yadav 1995). Meanwhile, a reference dependent model asserts that it is better to assign a price discount to a tie-in component that has a negative valuation at its current offer price than to a focal product that has a positive valuation at its current offer price(Janiszewski and Cunha 2004). This paper has expanded previous research regarding price discount presentation format, investigating the reasons for mixed results of prior research and presenting new mechanisms for price discount framing effect. Prior research has hypothesized that bundling is used to sell a tie-in component with an offer price above the consumer's reference price plus a focal product of the same offer price with reference price(e.g., Janiszewski and Cunha 2004). However, this study suggests that bundling strategy can be used for increasing product's attractiveness through the synergy between components even when offer prices of bundle components are the same with reference prices. In this context, this study employed various realistic bundle sets with same price between offer price and reference price in the experiment. Hamilton and Srivastava(2008) demonstrated that when evaluating different partitions of the same total price, consumers prefer partitions in which the price of the high-benefit component is higher. This study determined that their mechanism can be applied to price discount presentation formats. This study hypothesized that price discount framing effect depends not on the negative perception of tie-in component with offer price above reference price but rather on the consumers' perceived consumption benefit in bundle product. This research also hypothesized that preference for low-benefit discount mechanism is that perceived consumption benefit reduces price sensitivity. Furthermore, this study investigated how consumers' concern for quality in a price discount--a factor not considered in previous research--influences price discount framing. Yadav(1995)'s experiment used only one magazine bundle of relatively low quality uncertainty and could not show the influence of perceived uncertainty of quality. This study assumed that as perceived uncertainty of quality increases, the price sensitivity mechanism for assigning the discount to low-benefit will increase. Further, this research investigated the moderating effect of uncertainty of quality in price discount framing. The results of the experiment showed that when evaluating different partitions of the same total price and the same amount of discounts, the partition that discounts in the price of low benefit component is preferred to the partition that decreases the price of high benefit component. This implies that price discount framing effect depends on the perceived consumption benefit. The results also demonstrated that consumers are more price sensitive to low benefit component and less price sensitive to high benefit component. Furthermore, the results showed that the influence of price discount presentation format on the evaluation of bundle product varies with the perceived uncertainty of quality in high consumption benefit. As perceived uncertainty of quality gradually increases, the preference for discounts in the price of low consumption benefit decreases. Besides, the results demonstrate that as perceived uncertainty of quality gradually increases, the effect of price sensitivity in consumption benefit also increases. This paper integrated prior research by using a new mechanism of perceived consumption benefit and moderating effect of perceived quality uncertainty, thus providing a clearer explanation for price discount framing effect.