• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.979-990
• /
• 2016

This study presents a nonlinear finite element procedure involving a phenomenological model to validate the tensile strain capacity of the X80 line pipe developed for the strain-based design purpose. The procedure is based on the Gurson-Tvergaard-Needleman (GTN) model, which models nucleation, growth and coalescence of void volume fraction occurred inside a metal. In this study, the user-defined material module (UMAT) is implemented in the commercial finite element platform ABAQUS and is applied to the nonlinear damage analysis of steel specimens. Material parameters for the nonlinear damage analysis of base and weld metals are calibrated from numerical simulations for the tensile tests of round bar and full thickness specimens. They are then employed in the numerical simulations for SENT (Single Edge Notch Tension) test and CWPT (Curved Wide Plate Test) and in the simulations, the tensile strain capacities are naturally evaluated. Comparison of the numerical results with the experimental results and the conventional empirical formulae shows that the proposed numerical procedure can fairly well predict the tensile strain capacity of X80 line pipe. So, it is readily expected to be effectively applied to the strain-based design procedure.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.773-782
• /
• 2020

The development of joint FE models for deep learning neural network (DLNN)-based hybrid FEA is presented. Material models of bolts and bearings in the front axle of tractor, showing complex behavior induced by various tightening conditions, were replaced with DLNN models. Bolts are modeled as one-dimensional Timoshenko beam elements with six degrees of freedom, and bearings as three-dimensional solid elements. Stress-strain data were extracted from all elements after finite element analysis subjected to various load conditions, and DLNN for bolts and bearing were trained with Tensorflow. The DLNN-based joint models were implemented in the ABAQUS user subroutines where stresses from the next increment are updated and the algorithmic tangent stiffness matrix is calculated. Generalization of the trained DLNN in the FE model was verified by subjecting it to a new loading condition. Finally, the DLNN-based FEA for the front axle of the tractor was conducted and the feasibility was verified by comparing with results of a static structural experiment of the actual tractor.

• The KIPS Transactions:PartD
• /
• v.10D no.2
• /
• pp.247-260
• /
• 2003

To share and standardize information, especially in the database environments, MDR (Metadata Registry) can be used to integrate various heterogeneous databases within a particular domain. But due to the discrepancies of data element representation between organizations, global information integration is not so easy. And users who are searching integrated information on the Web have limitation to obtain schema information for the underlying source databases. To solve those problems, in this paper, we present a 3-layered Information Integration System (LI2S) based on MDRs and Ontology. The purpose of proposed architecture is to define information integration model, which combine both of the nature of MDRs standard specification and functionality of ontology for the concept and relation. Adopting agent technology to the proposed model plays a key role to support the hierarchical and independent information integration architecture. Ontology is used as for a role of semantic network from which it extracts concept from the user query and the establishment of relationship between MDRs for the data element. (MDR and Knowledge Base are used as for the solution of discrepancies of data element representation between MDRs. Based on this architectural concept, LI2S was designed and implemented.

• Korea Science and Art Forum
• /
• v.36
• /
• pp.391-400
• /
• 2018

To ensure a user-centered treatment environment, hospital construction needs an approach that is not centered on functional aspects such as efficiency or economic feasibility but on the consideration of needs as reflected in user psychology and behavior. Patients who are physically and psychologically vulnerable experience psychological pressure when they are placed in an unfamiliar environment. Most of existing studies however focus on the evaluation of the physical environment, without paying attention to the psychological or behavioral approach to anxiety and stress that patients may experience in a special environment that a hospital may be to them. This study examines general hospital inpatients to understand the usage of major space available and their satisfaction with privacy. This study provides useful primary information needed for the user-centered design of general hospital for improved patient health and welfare. For the purpose of the study, literature review, site investigation, and survey were conducted. Major functional space and privacy in general hospitals were studied, and the site investigation was performed to identify the plans and their status. Survey was also performed to understand the usage of functional space and satisfaction with such space usage as well as satisfaction with privacy. The findings were as follows: (1) Space usage was rated as average in general. It was found that patients used their rooms and lobby on a daily basis. By age, the usage was highest in the group in their 40s; the usage was relatively lower in the groups in their 30s or younger. (2) Space satisfaction was above average, indicating that patients were fairly satisfied. Satisfaction was highest in the lobby space designed with distinct features. By case, satisfaction was highest in Case B, characterized by its wide horizontal space in the rural settings. (3) Satisfaction with privacy in hospital was average, indicating that the demand for privacy was relatively higher but what patients receive in return was lower than their expectation. It was also found that satisfaction with privacy was a crucial element that affected the overall satisfaction with hospital.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.323-328
• /
• 2012

The purpose of this study is to develop automated structural design and analysis aided-program of aluminum extrusion carbody structures for railway vehicle. This developed program is called "AUTO-RAP" and could perform simultaneously structural design and verification for railway carbody structures made of aluminum extrusion independent of expertise and experience of design engineers. Design engineers are able to conduct the knowledge-based design by providing database of existing aluminum extrusion or user-defined function. The design verification is automatically programmed to evaluate its structural integrity according to Korean Railway Safety Law or Urban Transit Safety Law. In addition, this program could automatically generate an executable file of various commercial finite element programs such as ANSYS and ABAQUS and CAD files such as .stp and .iges by GUI environment applications using MFC(Microsoft Foundation Classes). In conclusion, it is expected to contribute to reduce product design cost and time of carbody structures aluminum extrusions in railway industry.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.577-586
• /
• 2014

As SNS has increased its influence on the society as a whole, companies also have started to consider how to take advantage of the new service paying specific attention to its characteristics of immediacy, sharability and interactivity. This study aims to circumstantiate the relationship between a task support tool of SNS and task-media fit, user characteristics and performance by focusing on its usage in work field. To address this issue, a Task-Technology Fit model is used to propose a research model considering the characteristics of SNS as a social element, information technology as well as its user characteristics. The outcome shows that job characteristics, virtual competence and media characteristics have a significant influence on task-media fit, whereas virtual competence and SNS characteristics variables have a significant influence on SNS usage. Besides, task-media fit has a significant influence on SNS usage and work performance while SNS usage has a significant influence on work performance. The study suggests that strategic use of SNS helps improve work performance and these individual characteristics should be considered in planning of SNS utilizing strategy.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.1-9
• /
• 2004

User-Perceived application-level performance is a key to the adoption and success of CDMA 2000. To predict this performance in advance, a detailed end-to-end simulation model of a CDMA network was built to include application traffic characteristics, network architecture, network element details, and protocol features. We assess the user application performance when a Radio Access Network (RAN) and a Core Network (CN) adopt different transport architectures such as ATM and If. For voice Performance, we found that the vocoder bypass scenario shows 8% performance improvement over the others. For data packet performance, we found that HTTP v.1.1 shows better performance than that of HTTP v.1.0 due to the pipelining and TCP persistent connection. We also found that If transport technology is better solution for higher FER environment since the IP packet overhead is smaller than that of ATM for web browsing data traffic, while it shows opposite effect to small size voice packet in RAN architecture. Though simulation results we showed that the 3G-lX EV system gives much better packet delay performance than 3G-lX RTT, the main conclusion is that end-to-end application-level performance is affected by various elements and layers of the network and thus it must be considered in all phases of the technology evolution process.

• Archives of design research
• /
• v.17 no.4
• /
• pp.69-78
• /
• 2004

This thesis is designed to investigate the relationship of Web Multimedia design. Web sites are needed to approach the lot of ways that increase the user intuitive lay over communicating information nowadays. In the digital era of today, multimedia is composed of such various elements as text, image, sound, animation, video. The method of the thesis is a research questions as this follow. First, the structuring element of the web site type was classified by a form and the contents in the web site. These types in this classified web site are HTML, flash and mixed type. Second, to study this thesis, we made up pose a questionnaire to students in the university as th method of random sampling. The goal of this survey is that user is how to understand about the web multimedia design. Results of analysis may be summarized as follows: 1) It was the image design in the NIKE web site that there would be evaluated the best design effected by flash, and it is finding that the NIDE web site will need more supporting Information, Interactive design through this studies. 2) It was information that there would be evaluated good design effect by text and image in SAMSUNG web site. Based on HTML, SAMSUNG need supporting motion image design by this studies. In conclusion, this thesis suggests that the each web medias should be constructed by the different web design component, according to information, Interactive, image design of web site.

• Journal of Families and Better Life
• /
• v.20 no.4
• /
• pp.61-73
• /
• 2002

The aim of this study is to understand the modernization process of interior spaces in the Korean housing, focused not only on the architectural aspects, but also on the sociological, anthropological and feministic aspects of housing. The development of korean housing from the period of traditional agricultural society and Japanese domination through the period of industrial development to the period of modem industrial society have been reviewed not from the Point of westernization but from the point of Korean own needs for modernity. It also tried to find the determinants of the relationship between social behavior patterns and space organization through historical change of housing plans. As a result, it was found the various western impacts to the continuation or change of Korean housing culture in the modernization process. Consequently this study comes to the concrete results as follows; 1) sociological aspect: The early layout of floorplans, that promoted the communication and contact between the user were changed. The layout of spaces in the modern housing tends to be not interdependence each other and be very isolated from the outdoor spaces. Those Phenomena reflect the trends to the Individualization, equivalence and privatization in the life of family. 2) feministic aspects: Differently from the early kitchen, modern ones locates in the internal space in the housing and the dinning area is appeared. And also the standing work at the kitchen war usually spreaded. Such changes are due to the emancipation of the women and downfall of the subordinate relationship between the genders. 3) anthropological aspects: The lifestyle, in which the user was mostly sitting on the floor, was constantly disappeared by using of furnitures that determines the function of each spaces in the housing. Those change demonstrate the change of behavior Patterns, thus, the needs of differentiation of function as well as the feministic needs. In other word, the coexistence of both fields of work and relax is required. 4) tectonic aspects: In the indoor space of modern housing the rooms are closed each other. Thus, concentrated circulation system act to separate these spaces. It is concrete spatial element that mostly shows the synthetic character of modem housing.

• Genomics & Informatics
• /
• v.5 no.1
• /
• pp.10-18
• /
• 2007

Numerous studies have reported that genes with similar expression patterns are co-regulated. From gene expression data, we have assumed that genes having similar expression pattern would share similar transcription factor binding sites (TFBSs). These function as the binding regions for transcription factors (TFs) and thereby regulate gene expression. In this context, various analysis tools have been developed. However, they have shortcomings in the combined analysis of expression patterns and significant TFBSs and in the functional analysis of target genes of significantly overrepresented putative regulators. In this study, we present a web-based A Functional Clustering Analysis Tool for Predicted Transcription Regulatory Elements and Gene Ontology Terms (FCAnalyzer). This system integrates microarray clustering data with similar expression patterns, and TFBS data in each cluster. FCAnalyzer is designed to perform two independent clustering procedures. The first process clusters gene expression profiles using the K-means clustering method, and the second process clusters predicted TFBSs in the upstream region of previously clustered genes using the hierarchical biclustering method for simultaneous grouping of genes and samples. This system offers retrieved information for predicted TFBSs in each cluster using $Match^{TM}$ in the TRANSFAC database. We used gene ontology term analysis for functional annotation of genes in the same cluster. We also provide the user with a combinatorial TFBS analysis of TFBS pairs. The enrichment of TFBS analysis and GO term analysis is statistically by the calculation of P values based on Fisher’s exact test, hypergeometric distribution and Bonferroni correction. FCAnalyzer is a web-based, user-friendly functional clustering analysis system that facilitates the transcriptional regulatory analysis of co-expressed genes. This system presents the analyses of clustered genes, significant TFBSs, significantly enriched TFBS combinations, their target genes and TFBS-TF pairs.